Moved the following kconfig options out of the target component:
* CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
* ESP*_REV_MIN -> esp_hw_support
* ESP*_TIME_SYSCALL -> newlib
* ESP*_RTC_* -> esp_hw_support
Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
This commit disables portUSING_MPU_WRAPPERS for the FreeRTOS SMP xtensa port.
This was previously enabled due to the need to keep a CPSA (coprocessor save
area pointer) in the TCB. The CPSA pointer is now calculated at run time.
This commit updates the usage of idle hooks in SMP FreeRTOS as follows:
- IDF style idle hooks are now called from vApplicationMinimalIdleHook()
- If the user provdies their own vApplicationMinimalIdleHook(), it can be
wrapped using -Wl,--wrap if CONFIG_FREERTOS_USE_MINIMAL_IDLE_HOOK is
enabled.
- SMP port no longer uses vApplicationIdleHook() as it's only called from
the prvIdleTask() and not every prvMinimalIdleTask()
This commit updates the task snapshot unit tests as follows:
- Both uxTaskGetSnapshotAll() and vTaskGetSnapshot() are now both tested
- Test cases are now dependent on CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT
This commit updates task snapshot as follows:
- Refactored implementation to increase readability
- Implementation moved into freertos_tasks_c_additions.h
- freertos_tasks_c_additions.h made a private header
- Support SMP FreeRTOS
- Removed configENABLE_TASK_SNAPSHOT option. CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT
is direclty used instead.
IDF FreeRTOS uses vTaskSuspendAll()/xTaskResumeAll() to stop preemption
on a particular core. However, those functions behave differently in FreeRTOS SMP.
This commit replaces all calls of vTaskSuspendAll()/xTaskResumeAll() with
vTaskPreemptionDisable()/vTaskPreemptionEnable() when compiling with SMP FreeRTOS.
This commit fixes various build errors in IDF (and tests) when compiling
with SMP FreeRTOS:
- Updated usage of xTaskGetIdleTaskHandle()
- Disable sysview tracing macros
- Update some task snapshot functions
- Disabled test_freertos_hooks.c test as vApplicationIdleHook() and
vApplicationTickHook() are used.
This commit updates the copied Xtensa port to support the new porting interfaces
of the FreeRTOS SMP kernel. These modifications are mainly contained in
- FreeRTOSConfig.h
- FreeRTOSConfig_smp.h
- portmacro.h
- port.c
Some porting interfaces have changed in FreeRTOS SMP. In order to allow building
with IDF, compatibility interfaces have been added.
This commit does the following:
- Add a Kconfig option to select between the IDF FreeRTOS kernel and the
FreeRTOS SMP kernel.
- Updates the freertos component's CMakeLists.txt so that FreeRTOS SMP
files are now built based the the new configuration option.
This commit WILL NOT compile. The port files for FreeRTOS SMP still need to
be updated.
This commit copies over ESP-IDF Xtensa portable files to the
FreeRTOS-Kernel-SMP directory. No changes were made, this commit
only copies the portable source files.
Notes:
- This commit WILL NOT compile
- Some SPDX header dates were updated to pass pre-commit check
This commit copies over the sources files from
https://github.com/FreeRTOS/FreeRTOS-Kernel/tree/smp based on the
commit 4832377117b4198db43009f2b548497d9cdbf8da
The FreeRTOS SMP sources are added to components/freertos/FreeRTOS-Kernel-SMP
Notes:
- This commit WILL NOT compile correctly. It simply copies over sources files
- copyright_ignore.txt entries added so that we can avoid using SPDX headers
- Portable files are not added yet
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
Moved the following kconfig options out of the target component:
* ESP32_X_BROWNOUT_* -> esp_system
* ESP32_X_DEBUG_OCDAWARE -> esp_system
* APP_NO_BLOBS -> build type (main kconfig)
This commit refactors the FreeRTOS configuration headers as follows:
- Layout is now similar to FreeRTOSConfig.h found in other upstream demos
- Separate out Vanilla FreeRTOS configurations and ESP-IDF additions
- Move/remove some irrelevant/unused macros and configurations
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
This commit adds a CHOOSE_MACRO_VA_ARG() selector to allow selection between two
versions of a macro based on the number of arguments. This replaces the previous
portGET_ARGUMENT_COUNT() selector.
- portYIELD_FROM_ISR() now uses CHOOSE_MACRO_VA_ARG()
- portYIELD_FROM_ISR(arg) version added to risc-v port
- Old vPortEvaluateYieldFromISR() and portGET_ARGUMENT_COUNT removed
These were called from IRAM context where the caller expect them to be inlined
and accessible when cache is disabled. This was not the case when compiled with -O0.
Closes https://github.com/espressif/esp-idf/issues/8301
This commit does the following:
- Adds SPDX license identifiers to FreeRTOS sources. Remove those FreeRTOS sources from
the copyright ignore list.
- Update xtensa port files to match FreeRTOS v10.4.3. Added SPDX license identifiers
to the port files.
- Fixed some improperly licensed files
- Removed portbenchmark.h from RISC-V port
Upstream xtensa exception handling will save PS, PC, and a0 registers
together when saving a minimal context. This commit ppdates the xtensa
exception handling to match upstream behavior.
The following files were deleted:
- components/esp_hw_support/include/soc/cpu.h
- components/soc/esp32s3/include/soc/cpu.h
The following functions are deprecated:
- get_sp()
The following functions declared in soc/cpu.h are now moved to esp_cpu.h:
- esp_cpu_configure_region_protection()
The following functions declared in soc/cpu.h are now moved to components/xtensa/include/esp_cpu_utils.h:
- esp_cpu_process_stack_pc()
All files with soc/cpu.h inclusion are updated to include esp_cpu.h instead.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
xPortStartScheduler calls vPortSetupTimer -> _frxt_tick_timer_init,
which enables tick timer interrupt and sets up the first timeout.
From that point on, the interrupt can fire. If the interrupt happens
while _frxt_dispatch is running, the scheduler will enter an infinite
loop. This is because _frxt_dispatch isn't supposed to be preemptable,
and the tick interrupt will overwrite some of the registers used by
_frxt_dispatch.
Note that this situation doesn't practically occur on the real
hardware, where the execution of vPortSetupTimer and _frxt_dispatch
happens quickly enough. However it can be reproduced on an emulator
if the tick period is set to 1ms.
Add an explicit call to portDISABLE_INTERRUPTS in xPortStartScheduler
to guarantee that _frxt_dispatch doesn't run with interrupts enabled.
This is similar to the esprv_intc_int_set_threshold(1); call in
RISC-V version of port.c.
This commit removes the portmacro.h include from task.h as portmacro.h
gets pulled in via FreeRTOS.h. This aligns with upstream FreeRTOS code.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This commit updates the handles for the timer, task and event_group
modules to struct type. This matches upstream freertos source.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This commit adds missing INCLUDE_ configurations to FreeRTOSConfig.h for
the following functions:
- xTaskAbortDelay()
- xTaskGetHandle()
Unit tests for these functions were also added.
Closes https://github.com/espressif/esp-idf/issues/7902
This issue was earlier fixed in commit 79e74e5d5f
but during migration to newer FreeRTOS release, it got introduced again.
This commit fixes thread safety issues with configASSERT() calls
regarding the value of uxSchedulerSuspended. A false negative
occurs if a context switch to the opposite core occurs in between
the getting the core ID and the assesment.
Relevant https://github.com/espressif/esp-idf/issues/4230
Closes https://github.com/espressif/esp-idf/issues/7726
Closes IDFGH-6041
Add TRY_ENTRY_CRITICAL() API to all for timeouts when entering critical sections.
The following port API were added:
- portTRY_ENTER_CRITICAL()
- portTRY_ENTER_CRITICAL_ISR()
- portTRY_ENTER_CRITICAL_SAFE()
Deprecated legacy spinlock API in favor of spinlock.h. The following API were deprecated:
- vPortCPUInitializeMutex()
- vPortCPUAcquireMutex()
- vPortCPUAcquireMutexTimeout()
- vPortCPUReleaseMutex()
Other Changes:
- Added portMUX_INITIALIZE() to replace vPortCPUInitializeMutex()
- The assembly of the critical section functions ends up being about 50 instructions longer,
thus the spinlock test pass threshold had to be increased to account for the extra runtime.
Closes https://github.com/espressif/esp-idf/issues/5301
This function resets the spinlock given as a parameter after taking it
(when entering the critical section). This then results in a panic once
it tries to exit the same critical section.
* Closes https://github.com/espressif/esp-idf/issues/7725
The previous SMP freertos round robin would skip over tasks when
time slicing. This commit implements a Best Effort Round Robin
where selected tasks are put to the back of the list, thus
makes the time slicing more fair.
- Documentation has been updated accordingly.
- Tidy up vTaskSwitchContext() to match v10.4.3 more
- Increased esp_ipc task stack size to avoid overflow
Closes https://github.com/espressif/esp-idf/issues/7256
The following changes have been made:
1. All FreeRTOS kernel source files are now placed in the
freertos/FreeRTOS-Kernel folder to match with the upstream folder structure.
2. All kernel include files are now placed in freertos/FreeRTOS-Kernel/include.
3. All port files are now placed in freertos/FreeRTOS-Kernel/portable.
4. All additions/customizations are placed in freertos/esp_additions.
5. All other miscellaneous files (README, License files etc.) are moved to
freertos/FreeRTOS-Kernel folder to match with the upstream.
6. Updated esp-cryptoauthlib to latest commit to resolve FreeRTOS
include dependencies.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This commit removes the following critical nested macros as follows:
- portENTER_CRITICAL_NESTED()
- portEXIT_CRITICAL_NESTED()
They are replaced with portSET_INTERRUPT_MASK_FROM_ISR() and
portCLEAR_INTERRUPT_MASK_FROM_ISR() which are the proper FreeRTOS interfaces.
Created a portmacro_deprecated.h for each port to contain deprecated API
that were originally from portmacro.h
This commit adds the following hook functions to obtain memory
for the IDLE and Timer Daemon tasks when configSUPPORT_STATIC_ALLOCATION
is enabled:
- vApplicationGetIdleTaskMemory()
- vApplicationGetTimerTaskMemory()
Currently, both functions simply allocate from the same memory as
regular tasks (i.e., internal memory for both the stack and TCB)
Closes https://github.com/espressif/esp-idf/issues/7511
Added DOC_EXCLUDE_SECTION section tag to conditionally remove sections
from FreeRTOS source files which we don't want in IDF API docs.
Added DOC_SINGLE_GROUP section tag to enable a flat document for
FreeRTOS and removing groups.
With these conditional tags, we can upstream FreeRTOS files without
affecting the upstream documentation.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
- port.c and portmacro.h contents are now logically grouped
- Doxygen API descriptions added
- Added refactor todo markers
- Removed portmacro_priv.h. Contents now in portmacro.h
- Formatted files
Moved FreeRTOSConfig.h from include/freertos to include/esp_additions/freertos.
Updated FreeRTOS.h file to include FreeRTOSConfig.h without the
freertos/ prefix to match with the upstream file.
Renamed architecture specific FreeRTOSConfig.h files to FreeRTOSConfig_arch.h
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
components/os: Move ETS_T1_WDT_INUM, ETS_CACHEERR_INUM and ETS_DPORT_INUM to l5 interrupt
components/os: high level interrupt(5)
components/os: hli_api: meta queue: fix out of bounds access, check for overflow
components/os: hli: don't spill registers, instead save them to a separate region
Level 4 interrupt has a chance of preempting a window overflow or underflow exception.
Therefore it is not possible to use standard context save functions,
as the SP on entry to Level 4 interrupt may be invalid (e.g. in WindowUnderflow4).
Instead, mask window overflows and save the entire general purpose register file,
plus some of the special registers.
Then clear WindowStart, allowing the C handler to execute without spilling the old windows.
On exit from the interrupt handler, do everything in reverse.
components/bt: using high level interrupt in lc
components/os: Add DRAM_ATTR to avoid feature `Allow .bss segment placed in external memory`
components/bt: optimize code structure
components/os: Modify the BT assert process to adapt to coredump and HLI
components/os: Disable exception mode after saving special registers
To store some registers first, avoid stuck due to live lock after disabling exception mode
components/os: using dport instead of AHB in BT to fix live lock
components/bt: Fix hli queue send error
components/bt: Fix CI fail
# Conflicts:
# components/bt/CMakeLists.txt
# components/bt/component.mk
# components/bt/controller/bt.c
# components/bt/controller/lib
# components/esp_common/src/int_wdt.c
# components/esp_system/port/soc/esp32/dport_panic_highint_hdl.S
# components/soc/esp32/include/soc/soc.h
Moved the inclusion of esp_compiler.h from FreeRTOS.h to
the app specific FreeRTOSConfig.h where the unlikely()
macro is used. This change is in alignment with the upstream
FreeRTOS.h file.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
xSemaphoreAltTake and xSemaphoreAltGive are Espressif defined macros and
are not being used. The respective definitions, xQueueAltGenericReceive
and xQueueAltGenericSend are also not part of current FreeRTOS source
(v10.4.3). Hence, removed xSemaphoreAltTake and xSemaphoreAltGive
definitions to align with upstream code.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
systimer was stopped because the option SYSTIMER_TIMER_UNIT1_CORE1_STALL_EN is set by default 1, it blocks counting.
For Unicore should be:
SYSTIMER_TIMER_UNIT1_CORE0_STALL_EN 1
SYSTIMER_TIMER_UNIT1_CORE1_STALL_EN 0
