alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
36,391 Commits 20 Branches 148 Tags 384 MiB
331a696d50
Commit Graph

258 Commits

Author SHA1 Message Date
laokaiyao
04970fe487 iperfUtility: add udp rx bandwidth scan 2021-09-01 19:11:28 +08:00
laokaiyao
8d18a9c614 emac: optimise iperf performane 2021-09-01 19:11:28 +08:00
morris
ab0c5fed25 eth: dont warn nego timeout if link is down 2021-08-27 15:30:46 +08:00
Ondrej Kosta
300618e5be Merge branch 'feature/dual_eth' into 'master' 
esp_eth: add support for multiple Ethernets modules at a time

Closes IDFGH-5596

See merge request espressif/esp-idf!14640
 2021-08-27 06:11:48 +00:00
Ondrej Kosta
ef30384902 esp_eth: add support for multiple Ethernets modules at a time 
Ethernet driver events properly bounded with ESP NETIF actions to support multiple Ethernet modules used at a time.

Components using Ethernet updated to conform with new API.

Closes https://github.com/espressif/esp-idf/issues/7318
 2021-08-24 17:10:36 +02:00
Ondrej Kosta
a37e4b18c6 phy_lan87xx: extended Vendor Specific Registers definition 
Extended Vendor Specific Registers definition to include definitions for LAN8740A/LAN8741A/LAN8742A

Closes https://github.com/espressif/esp-idf/pull/7269
 2021-08-10 15:54:32 +02:00
Ondrej Kosta
404905d5f1 esp_eth: Add support to LAN87xx family 
Merges/Related-to https://github.com/espressif/esp-idf/pull/7097
 2021-07-28 19:34:05 +08:00
Ondrej Kosta
02a432b8d3 Fix invalid ETH_MAC_DEFAULT_CONFIG macro in C++ 2021-07-19 09:56:07 +02:00
morris
8e069dd755 emac: configure data interface early 
Related to https://github.com/espressif/esp-idf/issues/7227
 2021-07-13 15:10:23 +08:00
Ondrej Kosta
a6db3a5e77 esp_eth: Change clock mode setting 
RMII clock mode is made to be run-time configurable.

Closes https://github.com/espressif/esp-idf/issues/6564
Closes https://github.com/espressif/esp-idf/issues/7107
 2021-07-08 14:27:31 +02:00
laokaiyao
fe354f1c50 hal/emac_hal: refactord emac_hal 2021-06-16 09:48:21 +08:00
David Cermak
45846f06cf esp_eth: Improve GPIO interrupt processing in w5500 driver 
Increase the interrupt reassert level timing so the chances of missing
two consecutive events are minimal.
Enable only SIR_RECV interrupt event, so the SEND events are not used
for GPIO signal.
 2021-05-25 04:52:46 +00:00
David Cermak
0cd021adb1 esp_eth: Recover the w5500 driver from missed io interrupt 
If the GPIO interrupt is re-asserted too quickly it could be missed. If this happens the driver goes silent and never receives any data. Recover by periodic checks of the IO signal level
 2021-05-25 04:52:46 +00:00
morris
0c25793b06 esp_eth: restart negotiation in esp_eth_start 2021-05-18 11:16:32 +08:00
morris
83f2d802ce esp_eth: fix default PHY reset gpio 
Closes https://github.com/espressif/esp-idf/issues/7034
 2021-05-18 11:16:05 +08:00
Jon Shallow
154ad2e0e1 esp_eth_mac_openeth.c: Fix issue created by generic check macros update 
Merges https://github.com/espressif/esp-idf/pull/6936
 2021-04-26 08:40:07 +00:00
David Cermak
1e674f1d20 esp_eth: Update KSZ8851SNL driver to use global error checkers 
Also updated KSZ8851SNL per internal code review:
* Removed Link status change interrupt as it's handled with polling
* Added auto negotiation timeout
* Updated typedefs, moved types to appropriate source, updated
  components/esp_eth/src/ksz8851.h to use only inherent device types
* Applied IDF code formatting
* Updated header file order to include first the most generic to more
  specific
 2021-04-22 13:55:51 +00:00
Vladimir Chistyakov
c4f131e6ee esp_eth: Add a KSZ8851SNL SPI Ethernet driver 
Implement the PHY and MAC layers in the driver similar to
the W5500 driver.

Update Kconfig, CMakeLists.txt, and component.mk to incorporate
the changes.

Resolves: #6542

Merges https://github.com/espressif/esp-idf/pull/6636
Closes https://github.com/espressif/esp-idf/issues/6542
 2021-04-22 13:55:51 +00:00
morris
0733adab5e esp_eth: using esp_timer to check link status 2021-04-21 13:08:07 +08:00
morris
537617aec7 esp_eth: support user customized PHY io function 
Closes https://www.github.com/espressif/esp-idf/issues/6745
 2021-04-21 13:08:07 +08:00
morris
ef344d89ae esp_eth: apply generic error check macros 2021-04-13 10:54:33 +08:00
David Čermák
0f36a2dd16 Merge branch 'bugfix/eth_w5500_4byte_corruption' into 'master' 
esp_eth: Fix w5500 read register operations

Closes IDFGH-4776 and IDFGH-4400

See merge request espressif/esp-idf!13060
 2021-04-12 14:26:30 +00:00
David Cermak
7af358ed93 esp_eth: Fix w5500 to break from potentially infinite tx loop 
The issue typically happens for link-down during Tx. Added two retry levels, one before checking the sanity of the w5500 phy register and another for the Tx done itself (if the device is in the sane state)

Closes https://github.com/espressif/esp-idf/issues/6233
 2021-04-12 07:59:40 +00:00
David Cermak
dfe9580967 esp_eth: Fix w5500 to correctly read registers on -Os 
Reading SPI data may come in 4-byte units and thus result in unwanted
overwrites if smaller size registers read, especially if multiple placed
one after another. Fixed by using direct reads to `trans` structure for
sizes smaller or equal to 4.

Closes https://github.com/espressif/esp-idf/issues/6579
 2021-04-12 07:59:40 +00:00
Omar Chebib
cd79f3907d gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3 
When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible
to set pins 18 and 19 as GPIOs. This commit solves this by manually
disabling USB JTAG when using pins 18 or 19.
The functions shall use `gpio_hal_iomux_func_sel` instead of
`PIN_FUNC_SELELECT`.
 2021-04-08 14:01:18 +08:00
morris
2a34b0496c esp_eth: refactor ksz8041 driver into ksz80xx 2021-03-30 08:53:15 +00:00
Patrick Wieder
98a4c70af9 Added support for Ethernet PHY KSZ8081 
Merges https://github.com/espressif/esp-idf/pull/6578
 2021-03-30 08:53:15 +00:00
morris
9d7ba4c49a eth_phy: fix wrong register bit order in ksz8041 2021-03-30 08:53:15 +00:00
morris
006a87557b esp_eth: added option to disable soft flow control when rx buffer is few 2021-02-01 14:14:54 +08:00
suda-morris
0208810eca esp_eth: fix typo in lan8720 driver 
Closes https://github.com/espressif/esp-idf/issues/6469
 2021-01-27 23:48:10 +08:00
morris
c010f24d8b esp_eth: deprecate esp_eth_receive 
Ethernet driver is interrupt driven only, don't support polling mode.
So deprecate esp_eth_receive API.
 2021-01-27 23:48:01 +08:00
Axel Lin
2049aa9f68 esp_eth: Add ioctl command for getting duplex mode 
Similar to ETH_CMD_G_SPEED, add ETH_CMD_G_DUPLEX_MODE for getting duplex mode.

Merges https://github.com/espressif/esp-idf/pull/6436
 2021-01-25 08:40:47 +00:00
morris
753a929525 global: fix sign-compare warnings 2021-01-12 14:05:08 +08:00
morris
c280dc3ac5 eth: added cert for download test 2021-01-07 11:22:23 +08:00
morris
1e905acacf eth: support W5500 MAC RAW mode 
W5500 features an Ethernet MAC+PHY, plus a HW SOCKET implementation.
But in IDF, we only use software TCP/IP stack, which means we have
to bypass the HW TCP/IP stack in W5500.
So we enables the MAC RAW mode in W5500.
 2020-11-16 13:30:49 +08:00
Angus Gratton
420aef1ffe Updates for riscv support 
* Target components pull in xtensa component directly
* Use CPU HAL where applicable
* Remove unnecessary xtensa headers
* Compilation changes necessary to support non-xtensa gcc types (ie int32_t/uint32_t is no
  longer signed/unsigned int).

Changes come from internal branch commit a6723fc
 2020-11-13 07:49:11 +11:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit) 
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
 2020-11-11 07:36:35 +00:00
Yorick van Pelt
65707cfb41 esp_eth_mac_esp32: optionally setup SMI GPIO's 
This enables passing smi_mdio_gpio_num = -1 to disable that signal

Merges https://github.com/espressif/esp-idf/pull/5903
 2020-09-25 19:59:41 +08:00
Renz Bagaporo
6462f9bfe1 esp32, esp32s2: create esp_pm component 2020-09-25 05:24:10 +00:00
morris
9fa06719fa global: enable build uinit test for esp32-s3 2020-09-22 15:15:03 +08:00
Ivan Grokhotkov
b6467257b9 Merge branch 'feature/cmock_component' into 'master' 
cmock as component replacing unity

See merge request espressif/esp-idf!9859
 2020-09-10 16:06:20 +08:00
Jakob Hasse
f7f46905ec esp_eth: moved extern "C" after includes 2020-09-08 17:44:57 +08:00
morris
31aa16bbe6 unit_test: switch icmp test server to taobao 2020-09-06 09:42:44 +08:00
Jakob Hasse
20c068ef3b cmock: added cmock as component 
* changing dependencies from unity->cmock
* added component.mk and Makefile.projbuild
* ignore test dir in gen_esp_err_to_name.py
* added some brief introduction of CMock in IDF
 2020-09-02 16:38:37 +08:00
morris
76fe489c58 ethernet: support power on timeout 
Closes https://github.com/espressif/esp-idf/issues/5425
 2020-08-10 18:54:25 +08:00
morris
f4131b9b42 ethernet: handle early rx interrupt 2020-08-10 18:54:25 +08:00
morris
4e38aab1b0 ethernet: support flow control for esp32 emac 2020-08-10 18:54:25 +08:00
morris
2917651478 esp_rom: extract common ets apis into esp_rom_sys.h 2020-07-27 15:27:01 +08:00
morris
ab0537c079 esp_rom: extract common MD5 hash apis into esp_rom_md5.h 2020-07-21 17:01:28 +08:00
morris
abcea51976 ethernet: insert min assert time for PHY HW reset 
Closes https://github.com/espressif/esp-idf/issues/5528
 2020-07-09 22:03:17 +08:00
morris
648bcc7a87 ethernet: add ksz8041 in basic ethernet example 2020-07-09 21:49:07 +08:00
Meowthink
62237cf28c Add Microchip KSZ8041 PHY support. 
Merges https://github.com/espressif/esp-idf/pull/5452
 2020-07-09 21:00:42 +08:00
morris
a4d0033c03 esp_rom: extract common GPIO apis into esp_rom_gpio.h 2020-07-07 11:40:19 +08:00
morris
1184366387 ethernet: support pin emac task to core 2020-05-29 17:51:37 +08:00
morris
d8a9ce14d7 ethernet: fix potential task watch dog timeout 2020-05-13 16:03:00 +08:00
morris
4454b198bb ethernet: better control start/stop/uninstall/install 2020-05-13 15:58:42 +08:00
morris
6020d6a5d4 ethernet: esp_eth_stop API should stop emac hardware 2020-05-13 15:58:42 +08:00
Renz Bagaporo
3d0967a58a test: declare requirements and include dirs private 2020-03-23 10:58:50 +08:00
morris
0a7ccb8095 ethernet: fix potential null pointer dereference 
Closes https://github.com/espressif/esp-idf/issues/4890
 2020-03-07 12:12:29 +08:00
morris
ea8d6318af add SOC_EMAC_SUPPORTED in soc_caps.h 2020-02-24 11:57:58 +08:00
morris
9e59be1aab ethernet: add enc28j60 example 2020-02-10 12:56:14 +08:00
Henry Gilbert
eda07acc81 Add ENC28J60 Ethernet Driver 
Merges https://github.com/espressif/esp-idf/pull/4435
 2020-02-10 12:56:14 +08:00
morris
e30cd361a8 global: rename esp32s2beta to esp32s2 2020-01-22 12:14:38 +08:00
morris
cc0459eea2 ethernet: always put eth_driver handle in SRAM 
Closes https://github.com/espressif/esp-idf/issues/4635
 2020-01-19 16:25:44 +08:00
morris
5ad0bdd8db ethernet: work with cache disabled 
add ETH_MAC_FLAG_WORK_WITH_CACHE_DISABLE flag, make ethenret driver
possible to work when cache disabled

Closes https://github.com/espressif/esp-idf/issues/4406
 2020-01-19 16:25:24 +08:00
michael
4220752aed ut: Move tests back from "esp32" subfolder 
DISABLED_FOR_TARGETS macros are used

Partly revert "ci: disable unavailable tests for esp32s2beta"

This partly reverts commit 76a3a5fb48.

Partly revert "ci: disable UTs for esp32s2beta without runners"

This partly reverts commit eb158e9a22.

Partly revert "fix unit test and examples for s2beta"

This partly reverts commit 9baa7826be.

Partly revert "efuse: Add support for esp32s2beta"

This partly reverts commit db84ba868c.
 2020-01-06 17:13:53 +08:00
morris
7baf7ce273 ethernet: optimise tx and rx 2019-12-24 11:18:31 +08:00
morris
fce6a9c735 ethernet: test ethernet download 2019-12-24 11:18:30 +08:00
morris
197d5d7378 ethernet: support phy addr auto detect 2019-12-24 11:18:30 +08:00
morris
cf161b1c83 ethernet: add start/stop stress test 2019-12-03 17:58:03 +08:00
morris
ac11545e0a ethernet: warning when double start/stop 2019-12-03 16:10:20 +08:00
morris
57ef88a91f ethernet: add pm lock 2019-12-03 16:10:20 +08:00
morris
c3ee156df0 ethernet: move netif glue && add ref counter 
1. move netif glue into single file
2. add reference counter for Ethernet driver
 2019-11-27 10:36:32 +08:00
suda-morris
05d71319de ethernet: add gpio number into config structure 2019-11-20 10:36:45 +08:00
suda-morris
f3d0429a9e ethernet: add reference counter for mac and phy 2019-11-20 10:36:45 +08:00
David Cermak
d0afdaaf24 esp_eth: moved starting link timer to eth driver start 2019-11-13 12:36:26 +01:00
David Cermak
7f5cda1b82 tcpip_adapter: updated tcpip_adapter compatablity layer to include all 
public API and keep 100% backward compatibility
update build of tcpip adapter when ethernet disabled
 2019-11-13 12:36:25 +01:00
David Cermak
3f60837de2 esp_eth: make esp_eth_driver_start public API so application could start ethernet when used without esp-netif 2019-11-13 12:36:25 +01:00
David Cermak
eb94d87935 esp_netif: address failures on tcpip-task ipc call, deinit lwip netif and ip address issues 2019-11-13 12:36:25 +01:00
David Cermak
3a19bf055d esp_netif and examples: using wifi driver handle, update examples and tests to pass the CI 2019-11-13 12:36:25 +01:00
David Cermak
ba13275c6b esp_netif: update default DHCP IP addresses to be in line with old interface, added loopback implementation, explicit esp-netif init, sanity checks for parameters added 2019-11-13 12:36:25 +01:00
David Cermak
b834c99148 examples: modify other examples and tests to use esp_netif instead of tcpip_adapter 2019-11-13 12:36:25 +01:00
David Cermak
ffe043b1a8 esp_netif: Introduction of esp-netif component as a replacement of tcpip_adpter 
- provides object oriented access to network intefaces
- not limited to default netifs
- more generic abstraction to network input output functions
- event handler registration removed from component responsibility
- backward compatibility layer for legacy tcpip_apapter APIs

Closes IDF-39
 2019-11-13 12:36:25 +01:00
Angus Gratton
7ce75a42c7 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-25 15:13:52 +11:00
suda-morris
dc6acf0033 icmp: add example and unitest 2019-10-22 04:38:09 +00:00
Angus Gratton
ae21d669b9 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-17 18:22:08 +11:00
Angus Gratton
5ee27aeec8 Merge branch 'feature/openeth_driver' into 'master' 
ethernet: support OpenCores ethernet MAC

Closes IDF-891

See merge request espressif/esp-idf!6252
 2019-10-17 13:05:27 +08:00
Angus Gratton
633a8376db Merge branch 'bugfix/ethernet_unitest_crash' into 'master' 
ethernet: fix crash in unit test

See merge request espressif/esp-idf!6284
 2019-10-16 13:05:16 +08:00
Angus Gratton
496ede9bcd Merge branch 'master' into feature/esp32s2beta_merge 2019-10-15 14:59:27 +11:00
Ivan Grokhotkov
31dac92e5f ethernet: support OpenCores ethernet MAC 
OpenCores Ethernet MAC has a relatively simple interface, and is
already supported in QEMU. This makes it a good candidate for enabling
network support when running IDF apps in QEMU, compared to the
relatively more complex task of writing a QEMU model of ESP32 EMAC.

This driver is written with QEMU in mind: it does not implement or
handle things that aren't implemented or handled in the QEMU model:
error flags, error interrupts. The transmit part of the driver also
assumes that the TX operation is done immediately when the TX
descriptor is written (which is the case with QEMU), hence waiting for
the TX operation to complete is not necessary.

For simplicity, the driver assumes that the peripheral register
occupy the same memory range as the ESP32 EMAC registers, and the
same interrupt source number is used.
 2019-10-13 17:05:26 +02:00
suda-morris
13c128fd31 Ethernet: optimize and bugfix 
1. simplify deallocate in esp_eth_mac_new_esp32, esp_eth_mac_new_dm9051
2. remove blocking operation in os timer callback
3. check buffer size in ethernet receive function
 2019-10-11 12:15:17 +08:00
suda-morris
f0bfd33a10 ethernet: fix crash in unit test 2019-10-11 02:14:12 +00:00
Ivan Grokhotkov
5830f529d8 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-02 19:01:39 +02:00
suda-morris
7c8c9cbb68 ethernet: enable unit test 2019-09-25 11:58:16 +08:00
Angus Gratton
adfc06a530 Merge branch 'master' into feature/esp32s2beta_merge 2019-09-20 10:28:37 +10:00
suda-morris
546ac64a9e ethernet: update spi-ethernet api 2019-09-19 09:41:21 +00:00
Ivan Grokhotkov
bf68285689 Merge branch 'feature/compile_option_O0' into 'master' 
build_system: add new compiler optimization levels

See merge request espressif/esp-idf!5686
 2019-09-17 16:54:55 +08:00
Angus Gratton
438d513a95 Merge branch 'master' into feature/esp32s2beta_merge 2019-09-16 16:18:48 +10:00
Andrew
4fdaeb6b6e cmake: Add new compiler optimization levels definitions 
Rename and add multiple kconfig compiler options. New compiler options
COMPILER_OPTIMIZATION_PERF and COMPILER_OPTIMIZATION_NONE have been added.
Optimize "Debug" and "Release" options to "Default" and "Size" respectively.
This commit also does the following:

- The COMPILER_OPTIMIZATION_PERF option introduced multiple bug.
This commit fixes those bugs.
- build.yml also updated to test for the new optimization options.
 2019-09-06 17:37:19 +08:00
Michael (XIAO Xufeng)
9baa7826be fix unit test and examples for s2beta 2019-09-04 10:53:25 +10:00
suda-morris
14ffd355e6 ethernet: bugfix and optimize 
1. check frame length before pass to stack
2. replace semaphore with task notify
 2019-09-03 11:01:16 +08:00
Angus Gratton
2fcbc6aaa5 esp_eth: KConfig formatting fix 2019-08-14 16:50:30 +10:00
Angus Gratton
e32d27e7e8 esp_eth: Add CONFIG_ETH_ENABLED flag to enable/disable ethernet at build time 
Always enabled by default, as SPI/Ethernet support is enabled by default.
 2019-08-13 17:14:16 +10:00
suda-morris
018de8101f ethernet: can build without enable esp32 emac 
Closes https://github.com/espressif/esp-idf/issues/3770
 2019-07-22 21:07:02 +08:00
suda-morris
cfbf8c5d07 ethernet: task yield at the end of isr handler 2019-07-22 21:07:02 +08:00
suda-morris
af78311975 ethernet: malloc hal together with driver context 2019-07-22 21:07:02 +08:00
suda-morris
cb42c29252 ethernet: support dm9051 
1. move resource allocation from xxx_init to xxx_new
2. fix enabling tx checksum insertion by mistake
3. iperf example: enlarge max arguments
4. add examples for spi-ethernet

Closes https://github.com/espressif/esp-idf/issues/3715
Closes https://github.com/espressif/esp-idf/issues/3711
 2019-07-04 19:38:13 +08:00
suda-morris
90c4827bd2 add esp_eth component 2019-06-26 10:19:23 +08:00