Commit Graph

39 Commits

Author SHA1 Message Date
chaijie
908192f504 solve memory error bug when in lightsleep mode 2022-05-16 19:42:56 +08:00
Jiang Jiang Jian
5fe7d538a5 Merge branch 'bugfix/fix_esp32c3_brownout_bug_after_deepsleep_v4.3' into 'release/v4.3'
rtc: fix c3 brownout bug after deepsleep (backport v4.3)

See merge request espressif/esp-idf!17959
2022-05-16 16:10:52 +08:00
chaijie
0d5f7b5521 fix c3 brownout bug after deepsleep 2022-04-28 18:20:25 +08:00
morris
d04a94320a Merge branch 'bugfix/fix_adc_calibration_light_sleep_issue_v4.3' into 'release/v4.3'
adc: fix calibration error when waking up from light sleep (v4.3)

See merge request espressif/esp-idf!16929
2022-04-21 15:56:10 +08:00
Michael (XIAO Xufeng)
75c720bcd3 esp_phy: use spinlock to avoid regi2c access conflicts 2022-04-06 14:46:10 +08:00
Armando
fe5a5284ba sleep: restore analog calibration registers after waking up from light sleep
Closes https://github.com/espressif/esp-idf/issues/8287
Closes https://github.com/espressif/esp-idf/issues/7921
2022-03-07 21:58:42 +08:00
Cao Sen Miao
9c4b96d63b USB_SERIAL_JTAG: Fix the issue that there is no rom log when restarting 2022-02-10 10:33:40 +08:00
jingli
4b73610eea reduce bootup time when using usb-serial-jtag 2021-12-03 20:55:52 +08:00
wuzhenghui
7c52647243 fix stuck in rtc_clk_cal 2021-10-21 21:54:04 +08:00
Li Shuai
4f71b49aa6 esp_hw_support: keep external 40 MHz xtal related analog circuit power on during sleep 2021-09-28 11:21:33 +08:00
Li Shuai
aac59ed5ec Power Management: add XTAL power domain to control whether external 40MHz xtal is powered down during sleep 2021-09-28 11:21:31 +08:00
Li Shuai
4f4254537c esp_hw_support: No voltage drop during light sleep to ensure stable output clock of rtc8m oscillator 2021-09-28 11:20:00 +08:00
Li Shuai
4ef6e37fcb Power Management: add RTC8M power domain to control whether internal 8m oscillator is powered down during sleep 2021-09-28 11:19:57 +08:00
Omar Chebib
173e001680 regi2c: add a spinlock for accessing (reg)I2C devices
When not compiling bootloader, a spinlock will be used for reading or writing
I2C internal devices/registers.
When compiling for bootloader, no need to use any lock.
2021-09-10 18:50:16 +08:00
sly
517dd5c5d5 fix_esp32c3_auto_adjust_volt 2021-08-25 21:31:07 +08:00
Li Shuai
21b3068b77 deep sleep: clear wakeup and reject int raw signal before entry sleep 2021-06-17 10:41:22 +08:00
Renz Bagaporo
0e904b3f7e ulp: clear rtc int at initialization
Closes https://github.com/espressif/esp-idf/issues/6654
2021-06-01 21:41:12 +08:00
Jiang Jiang Jian
ed76cc4dd4 Merge branch 'feature/support_adjust_voltage_storingInEfuse_open_glitch_rst_v4.3' into 'release/v4.3'
ESP32c3: auto adjust voltage dbias storing in efuse and open glitch reset for ECO3  (backport v4.3)

See merge request espressif/esp-idf!13388
2021-05-13 04:08:56 +00:00
chaijie
6d2bdfc5f5 1. open glitch reset for c3 ECO3;
2. set digital & rtc voltage to about 1.15v which storing in efuse.
2021-05-08 17:38:24 +08:00
Li Shuai
f684bd10f5 deep sleep: optimize sleep current in wifi softap mode 2021-04-29 10:14:30 +08:00
chaijie
e8282fb5c5 esp32s2/esp32s3/esp32c3: Decrease boot up time by delete useless slow clock calibration 2021-04-21 11:38:26 +00:00
chaijie
0c7f286a87 fix c3 hardware bug before ECO3 and optimizate bbpll config:
1. deepsleep poweron reset bug in high temperature before ECO3;
2. brownout reset bug before ECO2;
3. bbpll voltage low bug before ECO3;
4. need xpd iph for xtal before ECO3;
2021-03-31 20:17:54 +08:00
Xia Xiaotian
b71481093a esp_wifi: fix some Wi-Fi scan and coexist bugs
1. Fix the bug that Wi-Fi performance is impacted by BLE starting scan for a while in some scenarios on ESP32-C3.

2. Fix the bug that Wi-Fi performance is impacted when Bluetooth change state for a while in some scenarios on ESP32-C3.

3. Fix the bug that BLE performance is impacted by Wi-Fi scan on ESP32-C3.

4. Fix the bug that Wi-Fi scan fails when BLE is scanning on ESP32-C3.

5. Fix Wi-Fi ACK and CTS rate when low rate is disabled on ESP32-C3.
2021-02-08 21:20:09 +08:00
Michael (XIAO Xufeng)
d741b08fe7 Merge branch 'feature/esp32c3_deep_sleep_rtcfastmem' into 'master'
esp32c3: Finish deep sleep support

Closes IDF-2560

See merge request espressif/esp-idf!12031
2021-01-26 12:53:34 +08:00
Angus Gratton
0eb8d7e185 esp_hw_support esp32c3: Add deep sleep rtc crc calculation support
Last step to enable deep sleep on ESP32-C3 in all configurations
2021-01-25 17:20:04 +00:00
Michael (XIAO Xufeng)
2b83418141 adc: add fallback calibration method
Also:
1. Separate static configuration into init phase to improve
performance
2. Add a init code config layer to avoid duplicated configuration
3. Add a HW_CALIBRATION_V1 caps
2021-01-25 20:30:42 +08:00
Armando
f5f0461264 tmpsensor: add temp_sensor.h for c3 2021-01-25 04:51:40 +00:00
Angus Gratton
a5fb7deda5 driver: Update/cleanup esp32c3 rtc_tempsensor.c 2021-01-25 04:51:40 +00:00
Michael (XIAO Xufeng)
d7d1dee208 system: reset dma when soft reset 2021-01-25 04:51:40 +00:00
Li Shuai
3170ecf268 deep sleep: add empty interface rtc_deep_sleep_start for esp32c3 2021-01-20 13:28:34 +08:00
Angus Gratton
f683db7aea Merge branch 'feature/c3_IDF-2554' into 'master'
global: Uses CCOUNT API instead of XTHAL macro

Closes IDF-2554

See merge request espressif/esp-idf!11954
2021-01-13 12:55:21 +08:00
KonstantinKondrashov
dada7cd035 global: Uses CCOUNT API instead of XTHAL macro 2021-01-12 16:24:23 +08:00
fuzhibo
312a0ad6c1 fix: support bootloader random enable for esp32c3 2021-01-11 14:41:09 +08:00
chaijie
d505474f78 1. Fix CPU switch to 160M issue;
2. increase lightsleep voltage to make sure wakeup successfully;
3. add judgement code to whether wait or not when switch CPU frequency.
2020-12-30 12:32:31 +08:00
Marius Vikhammer
eb788deb03 esp_hw_support: merge C3 changes to master
Merge RTC related C3 changes to master
2020-12-30 12:20:41 +08:00
Angus Gratton
6d6510c39b soc: Move esp32c3 soc_memory_layout.c to soc component
Was incorrectly placed in esp_hw_support
2020-12-23 11:49:16 +11:00
Angus Gratton
75dede2344 esp_hw_support: Add esp32c3 regi2c headers 2020-12-23 09:53:24 +11:00
Cao Sen Miao
e338a2e3df rtc: add function to en/disable the rtc clock 2020-12-23 09:53:24 +11:00
Angus Gratton
b696d2917e esp_hw_support: Add initial ESP32-C3 support
From internal commit 7761d6e8
2020-11-30 15:23:15 +11:00