Commit Graph

279 Commits

Author SHA1 Message Date
fuzhibo
3ad5138dd8 fix coexist i2s_adc and rtc_adc 2020-03-03 11:58:53 +08:00
xiongyu
faf898b659 bugfix(i2s): fix driver ut i2s
* Add test support for ESP32S2

* Add loop back test

* Support chip internal connection, no external wiring required.

* Delete the relevant codes of PDM of ESP32-S2 ll layer.

* fix dac dma mode issue
2020-03-03 11:58:53 +08:00
Michael (XIAO Xufeng)
ce3ab0b8df Merge branch 'bugfix/nec_example' into 'master'
bugfix in NEC example and low level function

Closes IDFGH-2676 and IDFGH-2689

See merge request espressif/esp-idf!7562
2020-02-28 11:00:50 +08:00
khuynh
21fd946312 fix markdown table formatting
fixed markdown for a table in
`examples/peripherals/temp_sensor_esp32s2/README.md`

Merges https://github.com/espressif/esp-idf/pull/4609
2020-02-18 12:30:56 +01:00
DeeFuse
c788351c94 Update ir_builder_rmt_nec.c
fixes standard protocol mode wich would fail due to integer promotion in inversion

Merges https://github.com/espressif/esp-idf/pull/4750
2020-02-17 15:20:41 +08:00
DeeFuse
a63a0be6ed Update ir_protocols_main.c
RMT write should be non-blocking to wait the correct time for sending the repeat frame
2020-02-17 15:20:41 +08:00
Angus Gratton
effefc2329 Merge branch 'feat/sdio_example_without_intr' into 'master'
sdio: update the host example to support working with a slave without DAT1

See merge request espressif/esp-idf!7098
2020-02-17 07:04:31 +08:00
Michael (XIAO Xufeng)
067f3d21c9 sdspi, vfs_fat: allow sharing SPI bus among devices, and mounting multiple SD cards 2020-02-12 15:16:08 +08:00
suda-morris
75cadc2e41 console: simplify examples
1. simplify console examples
2. add "quit" command
3. support console command overwrite
4. add API reference
2020-02-07 20:15:06 +08:00
michael
1f43f33567 sdio: update the host example to support working with a slave without DAT1
The interrupt line (DAT1) is an extra pin comparing to SD memory,
allowing the slave to actively inform the host some events.

It's possible for two ESP32 chips to communicate with each other in
1-bit mode or SPI mode without the DAT1 line by polling the slave's
interrupt registers. But this will increase the CPU load of the host,
and do harm to the response speed to slave events.
2020-01-22 05:34:21 +00:00
morris
e30cd361a8 global: rename esp32s2beta to esp32s2 2020-01-22 12:14:38 +08:00
ziyuan_yin
e8ac0bd429 wave_gen example: analog signal generator
This wave generator example does following:

 - An analog signal generator.
 - Offering four kinds of waveform:
 sine, triangle, sawtooth, square.
 - Customer can select their expected waveform, frequency, etc. All of them can be configured in menuconfig.
2020-01-14 09:23:44 +00:00
Angus Gratton
782fc0df5f Merge branch 'refactor/can_driver' into 'master'
Refactor CAN to use HAL and LowLevel layers

Closes IDF-617

See merge request espressif/esp-idf!7019
2020-01-10 14:22:02 +08:00
Darian Leung
a049e02d96 can: Refactor CAN to use HAL and LowLevel layers
The following commit refactors the CAN driver such that
it is split into HAL and Lowlevel layers. The following
changes have also been made:

- Added bit field members to can_message_t as alternative
  to message flags. Updated examples and docs accordingly
- Register field names and fields of can_dev_t updated
2020-01-09 16:13:51 +08:00
Krzysztof
6070f610cc Implement review comments 2020-01-08 18:41:43 +08:00
Nathan Phillips
23e6ee9d01 Fix typos in README
Fix a broken link as well as updating the text.

Merges https://github.com/espressif/esp-idf/pull/4531
2020-01-07 13:12:13 +08:00
Geng Yu Chao
6c923cf330 Fix some typo in idf 2019-12-12 15:55:42 +08:00
He Yin Ling
c906e2afee test: update example and unit tests with new import roles:
tiny_test_fw is a python package now. import it using normal way.
2019-12-07 10:34:54 +08:00
houwenxiang
aac935ec81 bugfix(i2c): fix I2C driver breaking change issue.
1. Fixed I2C driver breaking change issue.
    2. Add I2C UT test case.
2019-12-04 15:51:36 +08:00
Angus Gratton
054724596d Merge branch 'feature/add_ir_protocol_example_test' into 'master'
rmt: enable ir protocols example test

Closes IDF-906

See merge request espressif/esp-idf!6856
2019-12-04 14:35:22 +08:00
Michael (XIAO Xufeng)
17b7c9036f sdio_example: use the new esp_ser component and new evboard 2019-12-03 22:58:43 +08:00
Michael (XIAO Xufeng)
087c8f6065 essl: new component to communicate with esp serial slave devices 2019-12-03 22:58:41 +08:00
morris
c43fe5e52e rmt: enable ir protocols example test 2019-12-03 10:45:53 +08:00
Fu Zhi Bo
3a468a1ffd Refactor the touch sensor driver 2019-11-27 20:08:44 +08:00
Angus Gratton
91b7a7beaf Merge branch 'bugfix/timer_intr_status_get' into 'master'
bugfix(timer): fix get intr status function

See merge request espressif/esp-idf!6807
2019-11-27 09:13:16 +08:00
chenjianqiang
bcfe684951 bugfix(timer): add a macro to control making the XTAL related functions 2019-11-26 12:39:46 +00:00
houwenxiang
f27ae9b0e2 feature: Add uart hal support. 2019-11-26 20:01:50 +08:00
Ivan Grokhotkov
6fda3df953 Merge branch 'bugfix/gpio_pin_bit_mask_truncation' into 'master'
driver: fix gpio pin_bit_mask truncation in sdspi_host and others

See merge request espressif/esp-idf!6746
2019-11-22 17:41:05 +08:00
fuzhibo
03ac1aaafd dac: refactor driver add hal 2019-11-22 11:44:46 +08:00
houwenxiang
28286183d1 feature(I2C): Add i2c hal support. 2019-11-21 20:34:07 +08:00
chenjianqiang
9f9da9ec96 feat(timer): refator timer group driver
1. add hal and low-level layer for timer group
2. add callback functions to handle interrupt
3. add timer deinit function
4. add timer spinlock take function
2019-11-21 14:14:19 +08:00
morris
357cc19da3 rmt: refactor examples 2019-11-20 10:54:21 +08:00
Ivan Grokhotkov
5b6b624e1f driver: fix gpio pin_bit_mask truncation in sdspi_host and others
Closes https://github.com/espressif/esp-idf/issues/4348
2019-11-18 13:42:22 +01:00
Darian Leung
81ddd9e291 CAN: Reenable example tests
This commit updates the CAN example tests and updates the job
and environment labels in the target-test.yml
2019-10-29 17:25:49 +08:00
Angus Gratton
7ce75a42c7 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-25 15:13:52 +11:00
Angus Gratton
36d440bd59 ci: Temporarily ignore CAN example test failures
Due to internal CI issue.
2019-10-25 12:49:42 +11:00
Darian Leung
434d1d29d1 can: Fix reset mode entry and exit calls
This commit fixes multiple bugs caused by incorrect calls to
can_enter_reset_mode() and can_exit_reset_mode. Example test
scripts also updated to match new runners.
2019-10-25 03:40:43 +08:00
Angus Gratton
496ede9bcd Merge branch 'master' into feature/esp32s2beta_merge 2019-10-15 14:59:27 +11:00
suda-morris
81e88764d5 console: fix wrong param passed to esp_err_to_name 2019-10-14 19:49:19 +08:00
Angus Gratton
438d513a95 Merge branch 'master' into feature/esp32s2beta_merge 2019-09-16 16:18:48 +10:00
Michael (XIAO Xufeng)
63329b169b ci: limit example test to ESP32s 2019-09-04 10:53:25 +10:00
Michael (XIAO Xufeng)
9baa7826be fix unit test and examples for s2beta 2019-09-04 10:53:25 +10:00
liu zhifu
003a9872b7 esp_wifi: wifi support new event mechanism
1. WiFi support new event mechanism
2. Update examples to use new event mechanism
2019-08-20 09:39:51 +00:00
Angus Gratton
6990a7cd54 Merge branch 'master' into feature/esp32s2beta_update 2019-08-19 15:03:43 +10:00
Angus Gratton
ee6b1399aa Merge branch 'feature/exclude_rom_from_example_header_files' into 'master'
exclude rom headers in examples

Closes IDF-557

See merge request espressif/esp-idf!5051
2019-08-15 10:50:01 +08:00
Angus Gratton
367ecc2d60 Merge branch 'refactor/timerg_in_test' into 'master'
timer_group: refactoring to avoid direct register access in the ISR

See merge request espressif/esp-idf!5656
2019-08-14 15:32:16 +08:00
Angus Gratton
18c5cfadae Fix function prototypes 2019-08-13 17:14:16 +10:00
suda-morris
b1497f2187 exclude rom headers in examples
1. avoid including rom headers directly in examples
2. add common API interface for CRC calculation in esp_common component
2019-08-13 11:10:22 +08:00
Michael (XIAO Xufeng)
264ffbeb14 timer_group: use the LL 2019-08-09 13:46:31 +08:00
Angus Gratton
c1e3e1cd9a Merge branch 'bugfix/fix_ledc_clock_select_bug' into 'master'
driver(ledc): fixed ledc clock selection bug

See merge request espressif/esp-idf!3612
2019-08-08 13:56:21 +08:00
Angus Gratton
04ae56806c Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 15:26:58 +10:00
Angus Gratton
24d26fccde Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 13:44:24 +10:00
Michael (XIAO Xufeng)
07166a6b18 sdio_slave: rewrite the doc and highlight efuse-burning as the default option for 3.3V modules 2019-08-07 17:10:34 +08:00
morris
1877a9fcd8 Merge branch 'feature/esp32s2beta_rtc_driver' into 'feature/esp32s2beta'
Feature/esp32s2beta rtc driver

See merge request espressif/esp-idf!5243
2019-08-07 14:43:17 +08:00
fuzhibo
572084821b add Comment for touchpad 2019-08-07 11:39:17 +08:00
kooho
2e8c85d8ff driver(ledc): fixed ledc clock selection bug. 2019-08-06 16:11:18 +08:00
fuzhibo
b055bff580 1.update touch driver; 2.update adc/dac driver; 3.add temp sensor driver; 2019-08-05 16:21:18 +08:00
kooho
2139ca668d Update I2S driver for esp32s2beta. 2019-08-05 16:05:16 +08:00
Angus Gratton
b23718995a Merge branch 'bugfix/strict_prototypes' into 'master'
Enable strict prototypes checks

Closes IDFGH-757

See merge request espressif/esp-idf!4546
2019-08-05 09:38:39 +08:00
Mahavir Jain
e7dba7d7bc examples: change default build instructions in docs to CMake 2019-08-02 16:32:46 +05:30
Anton Maklakov
75c0066f93 Fix remaining -Wstrict-prototypes warnings 2019-08-01 16:28:56 +07:00
Anton Maklakov
afbaf74007 tools: Mass fixing of empty prototypes (for -Wstrict-prototypes) 2019-08-01 16:28:56 +07:00
kooho
f98e7bbccf Update LEDC, PCNT,Timer_Group driver for esp32s2beta. 2019-07-31 16:03:22 +08:00
Ivan Grokhotkov
022223f570 Merge branch 'feat/sdmmc_io_cis_parse' into 'master'
sdmmc_io: support to print CIS information

See merge request espressif/esp-idf!5515
2019-07-29 19:05:30 +08:00
Michael (XIAO Xufeng)
b98b4c3886 sdmmc_io: support to print CIS information
Currently only ESP slaves can be parsed correctly.
2019-07-29 10:41:17 +08:00
Ivan Grokhotkov
26800ed71e global: update note in the partition tables
The build system automatically determines offsets of partitions from
the partition table, so no manual changes are needed. Instead, add a
note that partition offsets may need to be updated when increasing
the bootloader size.
2019-07-27 10:28:16 +02:00
chenjianqiang
e43513b610 bugfix(uart): uniform AT_CMD char configuration 2019-07-18 19:24:13 +08:00
chenjianqiang
4cc962353c feat(uart): update uart driver for esp32s2beta 2019-07-18 15:57:00 +08:00
Ramesh
8795f1ac86 Fixed the bug that the malloc memory size is smaller than the actual required.
Merges https://github.com/espressif/esp-idf/pull/3757
2019-07-12 09:51:41 +08:00
chenjianqiang
667113cf94 feat(i2c): update i2c driver for esp32s2beta 2019-07-10 11:41:36 +08:00
Angus Gratton
47bbb107a8 build system: Use CMake-based build system as default when describing commands 2019-07-08 17:31:27 +10:00
Michael (XIAO Xufeng)
25ab8380c8 ci: support to build esp32s2beta simple examples 2019-07-08 09:16:06 +08:00
Michael (XIAO Xufeng)
fcf4502c6b spi_example: fix the example to pass in esp32s2beta 2019-06-23 12:17:27 +08:00
Michael (XIAO Xufeng)
eacae2e982 spi_slave: fix a example issue caused by word alignment 2019-06-22 19:09:00 +08:00
Renz Christian Bagaporo
6771eead80 examples: use new component registration api 2019-06-21 19:53:29 +08:00
Michael (XIAO Xufeng)
2eff8f7742 spi_slave: fix a example issue caused by word alignment 2019-06-20 10:38:52 +08:00
Konstantin Kondrashov
399d2d2605 all: Using xxx_periph.h
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... .

Cleaned up header files from unnecessary headers (releated to soc/... headers).
2019-06-03 14:15:08 +08:00
Roland Dobai
151f757912 Rename Kconfig options (examples) 2019-05-21 09:32:55 +02:00
Roland Dobai
1ad2283641 Rename Kconfig options (components/bootloader) 2019-05-21 09:32:55 +02:00
Roland Dobai
0ae53691ba Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00
Michael (XIAO Xufeng)
562af8f65e global: move the soc component out of the common list
This MR removes the common dependency from every IDF components to the SOC component.

Currently, in the ``idf_functions.cmake`` script, we include the header path of SOC component by default for all components.
But for better code organization (or maybe also benifits to the compiling speed), we may remove the dependency to SOC components for most components except the driver and kernel related components.

In CMAKE, we have two kinds of header visibilities (set by include path visibility):

(Assume component A --(depends on)--> B, B is the current component)

1. public (``COMPONENT_ADD_INCLUDEDIRS``): means this path is visible to other depending components (A) (visible to A and B)
2. private (``COMPONENT_PRIV_INCLUDEDIRS``): means this path is only visible to source files inside the component (visible to B only)

and we have two kinds of depending ways:

(Assume component A --(depends on)--> B --(depends on)--> C, B is the current component)

1. public (```COMPONENT_REQUIRES```): means B can access to public include path of C. All other components rely on you (A) will also be available for the public headers. (visible to A, B)
2. private (``COMPONENT_PRIV_REQUIRES``): means B can access to public include path of C, but don't propagate this relation to other components (A). (visible to B)

1. remove the common requirement in ``idf_functions.cmake``, this makes the SOC components invisible to all other components by default.
2. if a component (for example, DRIVER) really needs the dependency to SOC, add a private dependency to SOC for it.
3. some other components that don't really depends on the SOC may still meet some errors saying "can't find header soc/...", this is because it's depended component (DRIVER) incorrectly include the header of SOC in its public headers. Moving all this kind of #include into source files, or private headers
4. Fix the include requirements for some file which miss sufficient #include directives. (Previously they include some headers by the long long long header include link)

This is a breaking change. Previous code may depends on the long include chain.
You may need to include the following headers for some files after this commit:

- soc/soc.h
- soc/soc_memory_layout.h
- driver/gpio.h
- esp_sleep.h

The major broken include chain includes:

1. esp_system.h no longer includes esp_sleep.h. The latter includes driver/gpio.h and driver/touch_pad.h.
2. ets_sys.h no longer includes soc/soc.h
3. freertos/portmacro.h no longer includes soc/soc_memory_layout.h

some peripheral headers no longer includes their hw related headers, e.g. rom/gpio.h no longer includes soc/gpio_pins.h and soc/gpio_reg.h

BREAKING CHANGE
2019-04-16 13:21:15 +08:00
Ivan Grokhotkov
7728f8755e Merge branch 'feat/example_sdio_over_spi' into 'master'
sdio: support SDIO over spi

See merge request idf/esp-idf!3069
2019-04-12 16:12:57 +08:00
Michael (XIAO Xufeng)
9985c33a46 sdio: support SDIO over spi in the example 2019-04-12 02:24:29 +08:00
Ivan Grokhotkov
e37b0ad648 esp_event: move trailing semicolons out of defines 2019-04-11 12:04:58 +08:00
955aa2e4e0 Update README.md
Merges https://github.com/espressif/esp-idf/pull/3104
2019-03-24 19:54:00 +01:00
morris
c159984264 separate rom from esp32 component to esp_rom
1. separate rom include files and linkscript to esp_rom
2. modefiy "include rom/xxx.h" to "include esp32/rom/xxx.h"
3. Forward compatible
4. update mqtt
2019-03-21 18:51:45 +08:00
Ivan Grokhotkov
945bd36884 examples: don't enable buffering on stdout in console examples
newlib uses significantly more stack space when printing to an
unbuffered stream. To reduce the amount of stack space required to
use the console, don’t disable buffering. linenoise should support
unbuffered stdout instead.
2019-03-13 20:32:37 +08:00
Angus Gratton
280d39aedd Merge branch 'bugfix/i2s_pdm_adc_use_apll' into 'master'
bugfix(i2s): allow to use apll in pdm/adc/dac mode

See merge request idf/esp-idf!3800
2019-02-26 11:47:49 +08:00
Darian Leung
099b83af67 CAN: Add functions to clear queues and fix multiple bugs
This commits adds the functions can_clear_transmit_queue() and
can_clear_receive_queue(). Closes #2906

The following bug are fixed:

- CAN_IO_UNUSED is now explicitly cast to enum type. Closes #2825
- Fix multiple documentation errors. Closes #2898, Closes #2794
- can_reconfigure_alerts() returns incorrect current_alerts. Closes #3028
- Add missing header file. Closes #3065
2019-02-18 21:31:33 +08:00
Michael (XIAO Xufeng)
c465053195 sdio: temporarily disable the sdio example ci, since the runners have
some power issue
2019-02-14 15:51:24 +08:00
Roland Dobai
37126d3451 Correct Kconfigs according to the coding style 2019-01-29 13:37:01 +01:00
Anton Maklakov
f88f06710e example: Avoid a fallthrough 2018-12-13 12:29:27 +08:00
hou wen xiang
67d95c609b doc(i2s): update README.md file of i2s related examples. 2018-12-10 10:33:41 +08:00
morris
8b7b5821c7 example: add nmea0183 parser example
Add NMEA0183 Parser example to illustrate how to use uart event driver together with esp event library to get GPS information.
2018-12-07 10:57:34 +08:00
Roland Dobai
57c54f96f1 examples: Fix Python coding style 2018-12-06 09:34:33 +01:00
Wang Jia Lin
a36d714d1a Merge branch 'doc/adc_example_doc_improve' into 'master'
doc(adc): Update README.md file of adc example.

See merge request idf/esp-idf!2665
2018-12-06 15:22:50 +08:00
hou wen xiang
8e9359b4fd doc(adc): Update README.md file of adc example. 2018-12-06 12:20:29 +08:00
hou wen xiang
062c64fca0 doc(pcnt): Update pcnt example README.md file. 2018-12-06 12:16:45 +08:00
ThisNameIsNotAllowed
b12c58224d Enhanced readability in README.md
Changed text based GPIO-list to some table based version.
This should enhance the readability.

Resolves https://github.com/espressif/esp-idf/pull/2749
2018-12-04 21:20:32 +08:00
Angus Gratton
ed21457afc Merge branch 'doc/ledc_example_doc_improve' into 'master'
doc(ledc): Update LEDC example README.md file

See merge request idf/esp-idf!2673
2018-11-30 14:48:25 +08:00