Marius Vikhammer
ee2f8b1a62
build system: always build with -fno-jump-tables & -fno-tree-switch-conversion
...
Jump tables placed in flash would cause issue with code that needed to be ran from IRAM.
These optimizations are now always disabled.
2021-06-24 14:54:10 +08:00
Omar Chebib
dd8843fec3
regi2c: add a spinlock for accessing (reg)I2C devices
...
When not compiling bootloader, a spinlock will be used for reading or writing
I2C internal devices/registers.
When compiling for bootloader, no need to use any lock.
2021-05-13 11:55:41 +08:00
Marius Vikhammer
38d9251bda
sleep: disable switch-case jump tables from being placed in flash
...
sleep_modes.c contains switch statements that should be placed in flash.
Settings for avoiding this was not updated during sleep_modes refactor.
2021-04-09 14:16:27 +08:00
Renz Bagaporo
586023790e
esp_system: move sleep modes to esp_hw_support, power down light sleep to esp_pm
2021-04-07 17:53:37 +08:00
Renz Bagaporo
c112bd8b57
esp_system: move intr_alloc
2021-04-07 17:53:37 +08:00
Renz Bagaporo
8762bfebde
esp_system: move asysnc memcpy to esp_hw_support
2021-04-07 17:53:37 +08:00
Renz Bagaporo
e6edf34e82
esp32: move esp_clk functions
2021-03-31 19:17:33 +08:00
Renz Bagaporo
784a02a4ee
esp32: move hw random
2021-03-31 19:13:03 +08:00
Renz Bagaporo
349f0cad3e
esp_common: other movements
2021-02-24 12:16:37 +08:00
Renz Bagaporo
ae15c81dbe
esp_common: move to esp_hw_support
2021-02-24 12:16:37 +08:00
Cao Sen Miao
e338a2e3df
rtc: add function to en/disable the rtc clock
2020-12-23 09:53:24 +11:00
Wu Bo Wen
5cc329b9d0
driver/adc: support for esp32s2 adc calibration scheme V2
...
notice that the o_code is now pulled from efuse instead of automatically calibrated. This may influence other parts of the system.
Closes https://github.com/espressif/esp-idf/issues/5455
2020-12-03 20:08:59 +08:00
chaijie
a48b5246cc
ESP32: Fix xtal 32k not oscillate or oscillate too slowly issue
...
ESP32 in revision0 and revision1 uses touchpad to provide
current to oscillate xtal 32k. But revision2 and revision3
do not need to do that.
Note: touchpad can not work and toupad/ULP wakeup sources
are not available when toupad provides current to xtal 32k
2020-11-23 19:38:11 +08:00
Renz Bagaporo
6b0a5af73e
soc: move implementations to esp_hw_support
2020-10-28 22:38:50 +08:00
Renz Bagaporo
988be69466
esp_hw_support: create component
2020-10-28 07:21:29 +08:00
