Commit Graph

686 Commits

Author SHA1 Message Date
Angus Gratton
97a382077f wifi: Add WIFI_PS_MODEM for backwards compatibility with V3.0 API 2018-04-09 16:55:38 +10:00
Anton Maklakov
046ff2e628 Make error codes looks like literals in the code of them (easy for searching). Minor fixes, typos 2018-04-09 13:54:18 +10:00
Fredrik
97c6a94a03 Bugfix GPIO_DIS_OUTPUT to work with pin 32 and up
Merges https://github.com/espressif/esp-idf/pull/1796
2018-04-09 12:28:23 +10:00
Xia Xiaotian
e727582180 Fix two WiFi and LWIP typos
1. close github issue: https://github.com/espressif/esp-idf/issues/1792
    2. close github issue: https://github.com/espressif/esp-idf/issues/1781
2018-04-05 11:46:42 +08:00
qiyueixa
2984cdbbe3 add mesh feature 2018-04-04 22:57:45 +08:00
Tian Hao
58e7464dc0 component/esp32 : clear some minor thingsw about PM and coexistence 2018-04-03 20:13:49 +08:00
Ivan Grokhotkov
139d49894c Merge branch 'feature/deactivate_wakeup_trigger' into 'master'
esp32: Add deactivation of wake up trigger for different sources

See merge request 
2018-04-03 15:19:10 +08:00
island
9b7454de0c support wifi&bt coexist (v0.9.1)
1. refactor wifi modem sleep
2. refactor wifi and bt phy enable/diable coexistence
3. support wifi&bt coexist (v0.9.1)
3. add coex pause resume
4. fix bt library interrupt reaction slowly
5. make a2dp more smooth when coex
6. add coexist preference option
7. Make CI do not check libcoexist.a printf/ets_printf
8. disable Wifi RX AMPDU when software coexistence enable && update wifi lib
9. bluetooth call modem sleep api
2018-04-02 13:44:48 +08:00
Roland Dobai
7c4b3d50f8 Make error codes globally unique 2018-03-27 08:12:54 +02:00
Alex Lisitsyn
1e9bb5bb7c esp32: Deactivate wakeup trigger after first wakeup
The files updated according to code review discussions.
In the sleep_modes.c removed immidiate disable of ULP  mode and leave just trigger deactivation.
The esp_sleep.h is updated to have the same defines for source as esp_sleep_wakeup_cause_t.
Updated documentation in sleep_modes.rst file to include cross references.
Some minor changes in test_sleep.c unit test.

(TW#18952)
Closes https://github.com/espressif/esp-idf/issues/1677
2018-03-20 12:23:32 +05:00
Deng Xin
bc97b0f380 bugfix of wpa2 assert when use sha256 do signature
The order of wpa2_crypto_funcs_t structure mismatch between IDF and wifi libray

close github issue https://github.com/espressif/esp-idf/issues/1297
2018-03-20 11:08:20 +08:00
Alex Lisitsyn
ce09cfd99b esp32: Deactivate wakeup trigger after first wakeup
Added function esp_sleep_disable_wakeup_source() to deactivate wakeup trigger for selected source.
Updated documentation for this function in sleep_modes.rst file.
Updated unit test to check this functionality for light sleep.
The test_sleep.c unit test is updated to add reliability for unit testing.

(TW#18952)
Closes https://github.com/espressif/esp-idf/issues/1677
2018-03-16 18:49:24 +05:00
Alex Lisitsyn
2d90da0817 esp32: Deactivate wakeup trigger after first wakeup
The timer wakeup function once activated cannot be disabled later using existing api. If user wants to use different wakeup sources after first sleep but it does not work. This change disables timer wakeup trigger in configuration that will be set into appropriate RTC registers in esp_light_sleep_start() function.

Added function esp_sleep_disable_wakeup_source() to deactivate wakeup trigger for selected source.
Updated documentation for this function in sleep_modes.rst file to pass make html.
Updated unit test to check this functionality for light sleep.
The test_sleep.c unit test is updated to add reliability for auto unit testing.

(TW#18952)
Closes https://github.com/espressif/esp-idf/issues/1677
2018-03-16 18:22:02 +05:00
Daniël van Eeden
bd0b3a7d6b Fix esp_sleep_wakeup_cause_t docs. Merges https://github.com/espressif/esp-idf/pull/1634
value and description didn't match
2018-02-20 20:22:14 +01:00
Roland Dobai
4322e31c98 Make it easier to look up error messages
tools/gen_esp_err_to_name.py generates
components/esp32/esp_err_to_name.c for lookup of the error codes from
all of the IDF project and easily identify all codes in one place
2018-02-15 14:19:03 +01:00
Roland Dobai
cf7a4cc650 Protect partition table by MD5 checksum 2018-02-05 11:36:03 +01:00
michael
fcfcab7678 feat(attr): add new macro DMA_ATTR and WORD_ALIGNED_ATTR to help dma buffer declaration. 2018-01-24 11:28:14 +08:00
Jack
624828ce83 Dump the frame of the other core when interrupt watchdog happens 2018-01-18 23:10:29 +00:00
Angus Gratton
eb659e401d Merge branch 'feature/esp_intr_set_in_iram' into 'master'
Add esp_intr_set_in_iram (Github PR)

See merge request 
2018-01-04 06:04:05 +08:00
Deomid Ryabkov
e3282a0cac Add esp_intr_set_in_iram
A function to change "in IRAM" status for an existing interrupt handle, without going through free/allocate of the interrupt.
mOS HW timer implementation requires this to make HW timers safe to re-set from an IRAM ISR.
2017-12-08 05:46:34 +03:00
Mahavir Jain
2efef48e3e docs: fix i2s code snippet for interrupt flags setting
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2017-12-06 12:05:11 +05:30
Ivan Grokhotkov
f0547d58e4 esp_timer: add documentation, expose profiling option in Kconfig 2017-11-29 11:44:46 +08:00
Darian Leung
4c13b2f391 docs/ipc documentation
This commit updates doxygen comments in the IPC header files and adds an rst
docs page.
2017-11-24 15:31:28 +08:00
Liu Zhi Fu
3f6a8f1430 esp32: add options to disable/enable TX/RX AMPDU independently
Make menuconfig can disable/enable TX/RX AMPDU independently
2017-11-23 09:42:31 +08:00
Angus Gratton
b83792f504 Merge branch 'doc/esp_wifi_types' into 'master'
docs: Add esp_wifi_types.h items to wifi API reference

See merge request 
2017-11-15 15:03:02 +08:00
Angus Gratton
c40dc36814 docs: Remove internal header esp_wifi_crypto_types.h from documentation 2017-11-15 17:40:38 +11:00
Angus Gratton
beba74ff61 docs: Add esp_wifi_types.h descriptions 2017-11-15 17:40:38 +11:00
Jiang Jiang Jian
004c391591 Merge branch 'feature/adjust_task_stack_size_according_to_nano' into 'master'
esp32/lwip: adjust task stack size according 'nano' print

See merge request 
2017-11-13 11:18:20 +08:00
Angus Gratton
36692dbac7 docs: Add esp_wifi_types.h items to wifi API reference
Previously only items defined esp_wifi.h in esp_wifi_crypto_types.h
were including in documentation reference.
2017-11-10 11:00:44 -08:00
Ivan Grokhotkov
3eedf3ed18 Merge branch 'bugfix/to_docs_from_github' into 'master'
Documentation bugfixes from the github

See merge request 
2017-11-10 11:13:25 +08:00
Ivan Grokhotkov
d1f6030921 Merge branch 'bugfix/from_github' into 'master'
Bug fixes from Github

See merge request 
2017-11-10 11:13:04 +08:00
Liu Zhi Fu
710055025e esp32/lwip: adjust task stack size according 'nano' print
1. Adjust tcpip/main/event/timer task stack size according 'nano' print
2. If 'nano' print is disabled the task stack size reduces 512 bytes
2017-11-09 10:09:42 +08:00
Seppe Stas
a106dc183d Clean up documentation of esp_wifi_set_country
Signed-off-by: krzychb
2017-11-07 20:26:22 +01:00
jeanleflambeur
8712fd3ccf Update esp_err.h
Renamed the internal rc to __err_rc to avoid clashes with local variables.
This code would not do the expected thing with the original ESP_ERROR_CHECK macro:

esp_err_t my_func(esp_err_t x)
{
  assert(x == 23);
}

esp_err_t rc = 23; //some value that is important fo the user
ESP_ERROR_CHECK(my_func(rc));

The macro will expand to:
esp_err_t rc = (my_func(rc));

And the code will assert, as my_func will receive a random value - whatever is in the internal macro rc temp variable. This is due to the C weirdness of allowing this code:

int x = x; //x has a random value.
2017-11-03 16:45:28 +08:00
Darian Leung
9d63e1da4a New Task Watchdog API (Revert of Revert)
This commit reverts the revert on the new task watchdog API. It also
fixes the following bug which caused the reversion.

- sdkconfig TASK_WDT_TIMEOUT_S has been reverted from the unit of ms back to the
unit of seconds. Fixes bug where projects using the new API without rebuilding sdkconfig
would cause the old default value of 5 to be interpreted in ms.

This commit also adds the following features to the task watchdog

- Updated idle hook registration to be compatible with dual core hooks

- Updated dual core hooks to support deregistration for cpu

- Legacy mode has been removed and esp_task_wdt_feed() is now replaced by
  esp_task_wdt_reset().  esp_task_wdt_feed() is deprecated

- Idle hooks to reset are now registered/deregistered when the idle tasks are
  added/deleted from the Task Watchdog instead of at Task Watchdog init/deinit

- Updated example
2017-11-02 16:47:51 +08:00
XiaXiaotian
87d3986b87 Fix the return value of esp_now_send() 2017-10-31 15:18:20 +08:00
Deng Xin
ccfbecd25f Wifi: bugfix of get wrong ap information in all channel scan
fix the issue get wrong ap information in all channel scan
2017-10-31 11:35:11 +08:00
Angus Gratton
2c2e7f6303 Merge branch 'bugfix/optmize_ipv6_event' into 'master'
bugfix: add netif info in event message when got ipv6 address

See merge request 
2017-10-23 17:00:10 +08:00
Tian Zhong Xing
55e95b04bd bugfix: add netif info in event message when got ipv6 address 2017-10-23 13:50:43 +08:00
Ivan Grokhotkov
59b7d98fec Merge branch 'feature/dfs' into 'master'
Dynamic frequency scaling

See merge request 
2017-10-22 12:34:11 +08:00
Darian Leung
461f8da704 docs/Added documentation about esp32 hooks
This commit adds documentation about the esp32 Idle and Tick Hooks
2017-10-18 15:19:35 +08:00
Ivan Grokhotkov
68e1751b78 pm: initial implementation for ESP32 2017-10-18 14:19:16 +08:00
Ivan Grokhotkov
47e3c9dd4b pm: initial version of power management APIs 2017-10-18 14:19:16 +08:00
Ivan Grokhotkov
37e9bc715c esp_clk.h: make public, add getters for RTC time, CPU/APB freq 2017-10-18 14:19:14 +08:00
Ivan Grokhotkov
f13623d97d make esp_timer.h public 2017-10-18 12:31:38 +08:00
Ivan Grokhotkov
566f018996 crosscore_int: add support for FREQ_SWITCH event 2017-10-18 12:31:38 +08:00
Ivan Grokhotkov
1da3204a7c spiram: expose function to initialize SPI RAM cache
Some frameworks based on ESP-IDF need to be able to decide whether to
initialize SPI RAM after the application has started. This change splits
out part of esp_spiram_init which manipulate cache MMU into a separate
function. Applications can disable cache, call esp_spiram_init_cache,
re-enable cache, and then call esp_spiram_init.
Disabling and re-enabling the cache can be achieved using functions
provided in esp_spi_flash.h.
2017-10-16 09:15:11 +08:00
He Yin Ling
3a271a4ae7 Merge branch 'bugfix/freertos_dual_core_hooks' into 'master'
bugfix/freertos_dual_core_hooks

See merge request 
2017-10-14 09:41:03 +08:00
Darian Leung
95d63137d1 bugfix/freertos_dual_core_hooks
This commit fixes bugs with the dual core changes to freeRTOS tick and idle hooks.
Interrupt watchdog now registers tick hooks to both cores.
API for cross core tick and idle hook registration were also added
2017-10-13 18:27:53 +08:00
Jiang Jiang Jian
713dee57f0 Merge branch 'feature/add_const_for_wifi_api' into 'master'
esp32: add const for some WiFi api

See merge request 
2017-10-13 17:08:29 +08:00
Jiang Jiang Jian
6ff5c32ae5 Merge branch 'feature/alloc_memories_of_wifi_and_lwip_in_spiram_first' into 'master'
Allocate some memories in SPIRAM first.

See merge request 
2017-10-13 15:47:27 +08:00
Liu Zhi Fu
0e586a4cdf esp32: add const for some WiFi api
Add const if the pointer parameter is const
2017-10-13 15:10:34 +08:00
XiaXiaotian
5df39cd4b6 Allocate some memories in SPIRAM first.
Try to allocate some WiFi and LWIP memories in SPIRAM first. If
    failed, try to allocate in internal RAM then.
2017-10-13 10:11:24 +08:00
Jiang Jiang Jian
dbee895741 Merge branch 'bugfix/phy_init_remove_descriptions' into 'master'
phy init: remove descriptions of PHY init parameters

See merge request 
2017-10-12 19:00:10 +08:00
Jiang Jiang Jian
904d6c8f2b Merge branch 'feature/scan_optimize' into 'master'
wifi: scan optimize

See merge request 
2017-10-10 13:39:16 +08:00
Deng Xin
d515494d1b wifi: optimize scan feature
1. add the threshold of match AP in fast scan
2. add blacklist feature
3. make sure would wrong if password didn't set
4. add scan example
2017-10-10 12:27:02 +08:00
Ivan Grokhotkov
fdc24eb118 phy init: remove descriptions of PHY init parameters 2017-10-09 14:40:08 +08:00
Jeroen Domburg
b6a2bd1184 Revert "esp32: New Task Watchdog API"
This reverts commit 616baa239d.
2017-09-30 18:07:19 +08:00
Darian Leung
616baa239d esp32: New Task Watchdog API
Legacy API of task watchdog used the same function esp_task_wdt_feed() to add
and feed a task. This caused issues of implicitly adding a task to the wdt list
if the function was used in shared code.

The new API introduces init, adding, feeding, deleting, deinit functions. Tasks
must now be explicitly added to the task watchdog using their handles. Deletion
must also be explicit using task handles. This resolves the issue of implicit
task additions to the task watchdog due to shared code calling
esp_task_wdt_feed().

Task watchdog is now fully configurable at runtime by calling the init and
deinit functions.

Also added functions to get the handles of idle tasks of the other core. This
helps when adding idle tasks to the watchdog at run time.

Configuring the task watchdog using menu config is still available, however
menu config will only result in calling the init and add functions for idle
tasks shortly after the scheduler starts.

Menu config also allows for using legacy behavior, however the legacy behavior
willcall the new API functions but with slight variations to make them legacy
compatible.

Documentation and example have also been updated

gcov_rtio.c headers updated to prevent error of freertos header files being
included in the wrong order.

Resolves issue TW#13265
2017-09-29 23:10:55 +08:00
Jeroen Domburg
740f8a79f0 Add logic to make external RAM usable with malloc() 2017-09-28 17:17:50 +08:00
Liu Zhi Fu
762f8da078 esp32: support wifi country code
1. Add completed support for WiFi country code
2. Modify esp_wifi_set_country API
2017-09-26 13:36:53 +08:00
XiaXiaotian
98dfb8c0b9 Record more information of scanned AP 2017-09-22 15:43:33 +08:00
Deng Xin
ee25caf4b2 WiFi: optimize scan feature
1. Add all channel scan feature
2. Add sort matched SSID by authmode feature
2017-09-21 14:28:49 +08:00
Jeroen Domburg
0460069582 Merge branch 'bugfix/panic_dport_no_mutex' into 'master'
Panic: stop dport access handler without trying to use a lock

See merge request 
2017-09-14 18:07:06 +08:00
Jeroen Domburg
875ae6a134 Add option to allocate external RAM using heap_alloc_caps 2017-09-14 10:47:44 +08:00
Jiang Jiang Jian
33a4a6a510 Merge branch 'feature/add_espnow' into 'master'
add ESPNOW feature

See merge request 
2017-09-13 20:32:53 +08:00
XiaXiaotian
e4ba31a8b9 add ESPNOW feature
ESPNOW is a kind of WiFi communication bettween WiFi devices, no
    matter they are connected to each other or not. Once two WiFi
    devices are paired, they can send data to or receive data from
    each other. The data is transmitted in action frame which can
    be encrypted with CCMP method. ESPNOW also support mutilcast frame
    transmitting.
2017-09-12 12:12:13 +08:00
Jeroen Domburg
b3fd494e71 Panic: stop dport access handler without trying to use a lock 2017-09-11 17:24:22 +08:00
michael
c82e51cf79 fix(intr): always assign the same intr to a same source, disable the source only when all the handlers disabled.
also document handlers sharing a same source.

TW#13454, https://github.com/nodemcu/nodemcu-firmware/issues/1874

Breaking change: handles assigned to a same source should have the same flag now.
2017-09-06 15:20:01 +08:00
Jeroen Domburg
34372a091c Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-09-04 12:05:49 +08:00
Ivan Grokhotkov
d2acf1ce77 sleep: add light sleep, factor out APIs common for deep/light sleep 2017-09-01 10:36:14 +08:00
Ivan Grokhotkov
65b046f17f dport access: introduce pause/resume instead of deinit 2017-09-01 10:36:14 +08:00
Lacy Rhoades
c61b3e89f1 Typo fixes
Merges https://github.com/espressif/esp-idf/pull/831
2017-08-30 17:55:00 +10:00
Ivan Grokhotkov
a25eb825e1 Merge branch 'bugfix/dport_protect_crypto' into 'master'
add protection for crypto registers in DPORT

See merge request 
2017-08-30 11:45:35 +08:00
XiaXiaotian
4776f73ca4 Disable some peripheral clocks when cpu starts
All peripheral clocks are default enabled after chip is powered on.
    When CPU starts, if reset reason is CPU reset, disable those clocks
    that are not enabled before reset. Otherwise, disable all those
    useless clocks.
    These peripheral clocks must be enabled when the peripherals are
    initialized and disabled when they are deinitialized.
2017-08-29 11:18:42 +08:00
Jeroen Domburg
a589411a3c Place uart_tx_wait_idle in IRAM 2017-08-28 11:35:27 +08:00
Ivan Grokhotkov
857a29872d esp_timer: add high resolution software timer API 2017-08-28 11:35:26 +08:00
Angus Gratton
2624e10055 esp32 hwcrypto: Use AES registers directly 2017-08-25 16:08:03 +10:00
Angus Gratton
cb31222e8b dport access: Add _DPORT_REG_SET_BIT & _DPORT_REG_CLR_BIT 2017-08-25 16:08:02 +10:00
Angus Gratton
83a3241341 wifi: Fix compilation error in WIFI_INIT_CONFIG_DEFAULT() if AMPDU disabled 2017-08-23 09:33:47 +10:00
Liu Zhi Fu
b45433110f tcpip_adapter/lwip: optimize wifi/ip event 2017-08-21 14:36:44 +08:00
Kedar Sovani
4c1c62a453 wifi: refactor code to match ethernet's init function structure 2017-08-18 08:33:02 +05:30
Kedar Sovani
8348a71847 ethernet: remove CONFIG_ETHERNET
1. Hello World application shows no footprint difference before and
after this change
2. examples/ethernet/ethernet application compiles properly (can't
test with my board)
2017-08-18 08:31:43 +05:30
Kedar Sovani
ba8cd58b08 kconfig: Remove Wi-Fi on/off as a menuconfig option
This is no longer required since the functions automatically get
pulled in based on the usage. A quick summary of footprint
comparisions before and after these set of patches is shown below:

Hello-World: (simplified for readability)
 old Total image size:~ 104902 bytes (.bin may be padded larger)
 old Total image size:~ 105254 bytes (.bin may be padded larger)
 Per-archive contributions to ELF file:
             Archive File DRAM .data & .bss   IRAM Flash code & rodata   Total
 old              libesp32.a       1973    177   4445       3939     2267   12801
 new              libesp32.a       1973    185   4473       3939     2267   12837

 new             libnvs_flash.a          0     92      0        274        8     374
 new             libstdc++.a          0      0      0         24        0      24

For some reason, nvs_flash.a (~400bytes) gets pulled in (particularly
the nvs_flash_init() function).

Power-Save: (simplified for readability)
 old Total image size:~ 421347 bytes (.bin may be padded larger)
 old Total image size:~ 421235 bytes (.bin may be padded larger)

 old      libtcpip_adapter.a          0     81      0       1947      115       2143
 new      libtcpip_adapter.a          0     69      0       1897      115       2081

The size actually shrinks a bit, since the AP interface function
doesn't get pulled in.
2017-08-16 15:55:28 +05:30
Kedar Sovani
159e7e81b4 esp32: Make 'restart' function independent of Wi-Fi
Restart being a lower-layer system-level function, needn't depend on
the higher level Wi-Fi libraries.

This also enables us to get rid of one more WIFI_ENABLED ifdef check
2017-08-16 15:54:28 +05:30
Kedar Sovani
55a6aca355 wifi: Map esp_wifi_init() to esp_wifi_init_internal()
Follow-on patches will include additional functionality in
esp_wifi_init()
2017-08-16 15:54:28 +05:30
Deng Xin
57bc38d867 Add the fast crypto function in supplicant
optimize the speed when do wifi connect
2017-08-09 21:36:13 +08:00
XiaXiaotian
1c4f7f2081 add get and set wifi maximum transmit power API 2017-07-28 15:06:52 +08:00
Liu Zhi Fu
c99c5d13e6 esp32: add menuconfig options to configure BA window
Make AMPDU Block Ack Window configurable in menuconfig because we need to configure it
in some special cases, such as iperf test etc
2017-07-25 13:11:38 +08:00
Wangjialin
10340d718f bugfix(typo): fix typo in rom/gpio.h 2017-07-17 15:41:02 +08:00
Ivan Grokhotkov
7fc25f18d2 Merge branch 'feature/enable_brownout_detector' into 'master'
Enable brownout detector

See merge request 
2017-07-13 11:40:37 +08:00
Angus Gratton
d8d2933bde Merge branch 'bugfix/gdbstub_handler_noreturn' into 'master'
gdbstub: Mark the panic handler entry as noreturn

See merge request 
2017-07-12 17:23:59 +08:00
Angus Gratton
cfbb1a652b Merge branch 'doc/esp_random' into 'master'
esp_random: Add some documentation about using before RF subsystem is on

See merge request 
2017-07-12 16:18:43 +08:00
Angus Gratton
3bb90bab97 esp_random: Add some documentation about using before RF subsystem is on 2017-07-11 14:27:20 +08:00
Angus Gratton
c049cd55a6 gdbstub: Mark the panic handler entry as noreturn
Fixes a warning in panic.c when this panic mode is enabled.
2017-07-11 10:18:08 +08:00
Angus Gratton
71c70cb15c heap: Refactor heap regions/capabilities out of FreeRTOS
Remove tagged heap API, rename caps_xxx to heap_caps_xxx

Also includes additional heap_caps_xxx inspection functions.
2017-07-10 17:46:03 +08:00
Angus Gratton
5ee49fd311 heap: Add new multi_heap heap implementation to replace FreeRTOS-based tagged heaps 2017-07-10 17:46:03 +08:00
Ivan Grokhotkov
01b185977c brownout detector: enable by default
Because of errata related to BOD reset function, brownout is handled as follows:

- attach an ISR to brownout interrupt
- when ISR happens, print a message and do a software restart
- esp_restart_nonos enables RTC watchdog, so if restart fails,
  there will be  one more attempt to restart (using the RTC
  watchdog)
2017-07-10 17:25:55 +08:00
Ivan Grokhotkov
0837b3b743 Merge branch 'doc/wifi_set_vendor_ie' into 'master'
Document the WiFi Vendor-Specific Information Element API

See merge request 
2017-06-30 16:37:18 +08:00
Angus Gratton
9297edaf60 ipc task: Allow configuration of IPC task stack size
Fixes regression in 3fe0022ef
2017-06-30 15:04:19 +10:00
Angus Gratton
5c925bf96e esp_wifi.h: Document the Vendor-Specific Information Element functions 2017-06-29 17:29:23 +10:00
Angus Gratton
b3603ccf58 esp_wifi header: Fix typo 2017-06-29 17:19:17 +10:00
Alexey Gerenkov
8d43859b6a esp32: SEGGER SystemView Tracing Support
Implements support for system level traces compatible with SEGGER
SystemView tool on top of ESP32 application tracing module.
That kind of traces can help to analyse program's behaviour.
SystemView can show timeline of tasks/ISRs execution, context switches,
statistics related to the CPUs' load distribution etc.

Also this commit adds useful feature to ESP32 application tracing module:
 - Trace data buffering is implemented to handle temporary peaks of events load
2017-06-27 20:52:43 +03:00
Jiang Jiang Jian
07ccbb8dbc Merge branch 'bugfix/rtc_time_issues' into 'master'
Fixes for RTC time issues

See merge request 
2017-06-16 15:29:56 +08:00
Ivan Grokhotkov
8ccb2a4990 esp32: make time monotonic across resets
Small changes to clock calibration value will cause increasing errors
the longer the device runs. Consider the case of deep sleep, assuming
that RTC counter is used for timekeeping:
- before sleep:
   time_before = rtc_counter * calibration_val
- after sleep:
   time_after = (rtc_counter + sleep_count) * (calibration_val + epsilon)
where 'epsilon' is a small estimation error of 'calibration_val'.
The apparent sleep duration thus will be:
time_after - time_before = sleep_count * (calibration_val + epsilon)
                           + rtc_counter * epsilon

Second term on the right hand side is the error in time difference
estimation, it is proportional to the total system runtime (rtc_counter).

To avoid this issue, this change makes RTC_SLOW_CLK calibration value
persistent across restarts. This allows the calibration value update to
be preformed, while keeping time after update same as before the update.
2017-06-16 12:06:04 +08:00
Ivan Grokhotkov
a72b1abc51 esp32: disable DPORT access protection when doing esp_restart
DPORT access protection can not work when the other CPU is stalled.
Writes to DPORT registers in esp_restart caused the program to hang due
to access protection, and the reset happened due to RTC_WDT, not SW_RST.
This change adds esp_dport_access_int_deinit function and calls it from
esp_restart once the other core is stalled.
2017-06-15 18:15:35 +08:00
Jiang Jiang Jian
69e8085624 Merge branch 'bugfix/wps_receive_m2d_fail_process' into 'master'
ESP32: Add error wps fail reason

See merge request 
2017-06-14 10:57:59 +08:00
Ivan Grokhotkov
6e704fc421 Merge branch 'bugifx/cplusplus_guards' into 'master'
add C++ include guards to header files which are missing them

See merge request 
2017-06-14 09:14:02 +08:00
Deng Xin
3d963f1c61 Merge branch bugfix/wps_receive_m2d_fail_process to master
ESP32: Add error wps fail reason enum in esp_event.h
see merge request 
2017-06-13 21:48:48 +08:00
Liu Zhi Fu
f40be8eb77 esp32: add sniffer filter api
Add sniffer filter to filter specified packets
2017-06-06 19:07:12 +08:00
Ivan Grokhotkov
06accaf851 add C++ include guards to header files which are missing them
Fixes https://github.com/espressif/esp-idf/issues/628
2017-05-31 17:20:17 +08:00
Angus Gratton
dbb862299d Merge branch 'bugfix/github_small_prs' into 'master'
Small PR fixes from github

Small bug fixes & typo corrections from github.

See merge request 
2017-05-19 07:51:47 +08:00
Jiang Jiang Jian
0d66ac256b Merge branch 'bugfix/minor_fix_about_wifi_api_comments' into 'master'
esp32: minor fix for wifi api comments

Minor fix about the comments of wifi_promiscuous_pkt_type_t

See merge request 
2017-05-18 14:59:50 +08:00
Ankit Daftery
66191fc0b5 doc: Update wifi scan description
Code was refactored, updating documentation to reflect that

Merges https://github.com/espressif/esp-idf/pull/593
2017-05-17 11:36:13 +10:00
Liu Zhi Fu
f59bf74057 esp32: minor fix for wifi api comments
Minor fix about the comments of wifi_promiscuous_pkt_type_t
2017-05-16 17:01:42 +08:00
Tian Hao
3d22f1ee2f component/esp32 : fix library sport access protections.
1. add esp32 library access DPORT register protections.
2. add bluetooth library access DPORT register protections.
3. change register operation(suffix/prefix) to new style.
2017-05-13 19:55:11 +08:00
Jiang Jiang Jian
bb25ac91f4 Merge branch 'bugfix/dualcore' into 'master'
component/soc: fix register access protection missing

- fix dport register access protection missing
- add rom function protect
- add normal register function check

See merge request 
2017-05-12 18:19:31 +08:00
Tian Hao
377a1f5ea1 component/esp32 : do more fix of dualcore bug
1. the cache API in romcode will access DPORT register, so protect it.
2. fix STALL spelling.
3. check dport access by non-dport access function
2017-05-12 15:41:51 +08:00
Ivan Grokhotkov
15a6145961 Merge branch 'feature/get_chip_ver' into 'master'
add API to get chip info

This change adds an API to get chip info, such as chip model, enabled capabilities, size of embedded flash, silicon revision.

Hello_world example is modified to print out the information about the chip. The example is also simplified by moving all code into the main task.

Ref TW12031.

See merge request 
2017-05-11 12:05:55 +08:00
Ivan Grokhotkov
c742f7d860 Merge branch 'feature/base_mac_address' into 'master'
Optimize configuration of base MAC address

Application developer can call APIs to configure base MAC address
instead of using menuconfig.

See merge request 
2017-05-11 12:01:51 +08:00
Jiang Jiang Jian
c518325385 Merge branch 'bugfix/dualcore_dport' into 'master'
component/esp32 : fix dualcore bug

1. When dual core cpu run access DPORT register, must do protection.
2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro.

See merge request 
2017-05-10 11:27:01 +08:00
XiaXiaotian
b22067a8f0 Optimize configuration of base MAC address
Application developer can call APIs to configure base MAC address
    instead of using menuconfig.
2017-05-10 10:15:07 +08:00
Tian Hao
26a3cb93c7 component/soc : move dport access header files to soc
1. move dport access header files to soc
2. reduce dport register write protection. Only protect read operation
2017-05-09 18:06:00 +08:00
Tian Hao
f7e8856520 component/esp32 : fix dualcore bug
1. When dual core cpu run access DPORT register, must do protection.
2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro.
2017-05-08 21:53:43 +08:00
Ivan Grokhotkov
2260c714e7 add esp_chip_info API 2017-05-05 17:28:30 +08:00
Jeroen Domburg
8af3fe4e84 Warn against and check for non-DMA-capable pointers being passed to SPI when DMA is used 2017-05-05 12:28:03 +08:00
Jiang Jiang Jian
899a5d223f Merge branch 'feature/opt_scan_before_connect' into 'master'
optimize scan before station connecting to AP

1. Store the information of AP(ssid, password, bssid, channel, etc)
    into nvs when station connects to AP successfully. If station
    connects to the same AP next time, it will scan the stored channel of the AP
    first.

2. Add a parameter of channel for scanning before connecting to AP.
    If the channel is set to 0, station will scan full channels. If it
    is set to 1~13, station will only scan the channel.

See merge request 
2017-04-27 21:11:13 +08:00
XiaXiaotian
100d2dd938 optimize scan before station connecting to AP
1. Store the information of AP(ssid, password, bssid, channel, etc)
    into nvs when station connects to AP successfully. If station
    connects to the same AP next time, it will scan the stored channel of the AP
    first.

    2. Add a parameter of channel for scanning before connecting to AP.
    If it is set to 1~13, station will scan starting from the channel.
    If the channel of AP is unknown, set it to 0.
2017-04-27 14:28:52 +08:00
Ivan Grokhotkov
1324e565fa Merge branch 'bugfix/esp32_core_dump_sanity_checks' into 'master'
esp32: Core dump sanity checks

Adds sanity checks when doing core dump to flash

- CRC for core dump flash partition config
- Tasks with corrupted TCBs are skipped
- Assertions to check that nothing is written beyond core dump flash partition

Ref TW11879

See merge request 
2017-04-27 10:43:58 +08:00
Alexey Gerenkov
98895af68b esp32: Core dump sanity checks were added
- CRC for core dump flash partition config
 - Tasks with corrupted TCBs are skipped
 - Assertions to check that nothing is written beyond core dump flash partition
2017-04-26 21:13:02 +03:00
Ivan Grokhotkov
6353bc40d7 Add support for 32k XTAL as RTC_SLOW_CLK source
- RTC_CNTL_SLOWCLK_FREQ define is removed; rtc_clk_slow_freq_get_hz
  function can be used instead to get an approximate RTC_SLOW_CLK
  frequency

- Clock calibration is performed at startup. The value is saved and used
  for timekeeping and when entering deep sleep.

- When using the 32k XTAL, startup code will wait for the oscillator to
  start up. This can be possibly optimized by starting a separate task
  to wait for oscillator startup, and performing clock switch in that
  task.

- Fix a bug that 32k XTAL would be disabled in rtc_clk_init.

- Fix a rounding error in rtc_clk_cal, which caused systematic frequency
  error.

- Fix an overflow bug which caused rtc_clk_cal to timeout early if the
  slow_clk_cycles argument would exceed certain value

- Improve 32k XTAL oscillator startup time by introducing bootstrapping
  code, which uses internal pullup/pulldown resistors on 32K_N/32K_P
  pins to set better initial conditions for the oscillator.
2017-04-26 12:43:22 +08:00
Jiang Jiang Jian
3f4e917ad6 Merge branch 'feature/ppp_over_serial' into 'master'
Enable experimental/unsupported PPP over Serial driver

From PR  https://github.com/espressif/esp-idf/pull/272

See merge request 
2017-04-25 14:02:55 +08:00
XiaXiaotian
0c358c37f5 remove unneeded header file including 2017-04-24 16:11:26 +08:00
Jiang Jiang Jian
97142bb8db Merge branch 'feature/support_read_mac_addr_from_customer_efuse' into 'master'
Add customer MAC address that read from efuse



See merge request 
2017-04-24 11:30:55 +08:00
XiaXiaotian
5553fbd537 add base MAC address storage choice.
Base MAC address can be stored in default manufacture-defined or customer
    pre-defined place in EFUSE and other place e.g. flash or EEPROM.
    If choose to use base MAC address which is stored in other place, please
    call esp_base_mac_addr_set_external() before initializing WiFi/BT/Ehternet.
2017-04-21 14:55:11 +08:00
Adrian Muzyka
47c722d674 Enable lwip PPPoS support
* Fix some lwip api bugs
 * Added PPP_SUPPORT parameter to lwip Kconfig
 * Added example pppos_client

Merges  https://github.com/espressif/esp-idf/pull/272
2017-04-21 14:23:34 +10:00
Alexey Gerenkov
55f1a63faf esp32: Adds functionality for application tracing over JTAG
- Implements application tracing module which allows to send arbitrary
   data to host over JTAG. This feature is useful for analyzing
   program modules behavior, dumping run-time application data etc.
 - Implements printf-like logging functions on top of apptrace module.
   This feature is a kind of semihosted printf functionality with lower
   overhead and impact on system behaviour as compared to standard printf.
2017-04-17 23:26:29 +03:00
Ivan Grokhotkov
15ec487fde Merge branch 'feature/esp32_d2wd_support' into 'master'
ESP32-D2WD support

Support ESP32-D2WD with integrated flash in ESP-IDF.

Includes fix for https://github.com/espressif/esp-idf/issues /521


See merge request 
2017-04-14 20:57:39 +08:00
Jiang Jiang Jian
9050307dfe Merge branch 'feature/check_invalid_cache_access' into 'master'
Detect invalid cache access

This MR adds always-on feature which detects cache invalid access and triggers panic handler when invalid access interrupt is raised.


See merge request 
2017-04-13 16:11:19 +08:00
Angus Gratton
f7793840e1 bootloader: Add QIO support for ESP32-D2WD SPI flash 2017-04-13 17:55:47 +10:00
Angus Gratton
85e76a7cfc spiflash ROM functions: Remove Quad I/O mode enable/disable code from flash ROM functions
Confusion here is that original ROM has two functions:

* SPIReadModeCnfig() - sets mode, calls enable_qio_mode/disable_qio_mode
* SPIMasterReadModeCnfig() - As above, but doesn't set QIO mode in status register

However we never want to use the ROM method to set/clear QIO mode flag, as not all flash chips work this way. Instead we
do it in flash_qio_mode.c in bootloader.

So in both cases (ROM or "patched ROM") we now call SPIMasterReadModeCnfig(), which is now named
esp_rom_spiflash_config_readmode().
2017-04-13 17:54:42 +10:00
Jeroen Domburg
0b79d07d34 add detection of invalid cache access
- fix level 4 interrupt vectors to produce correct backtrace
- initialize invalid cache access interrupt on startup
- handle invalid cache access in panic handler
2017-04-13 15:27:38 +08:00
XiaXiaotian
454d00e2ae check wifi state when wifi deinit is called 2017-04-13 14:34:40 +08:00
XiaXiaotian
d61959b583 change scanned ap's ssid array len to 33 2017-04-13 10:09:07 +08:00
Ivan Grokhotkov
9edab21385 Merge branch 'feature/rtc_clk_impl' into 'master'
Introduce soc component, add source of rtc_clk and rtc_pm libraries

This MR adds parts of the RTC library source code (initialization, clock selection functions, sleep functions). WiFi-related power management functions are kept inside the precompiled library. Most of RTC library APIs have been renamed.

Default CPU frequency option in Kconfig is set to 160MHz, pending qualification of 240MHz mode at high temperatures.

Register header files are moved into the new soc component, which will contain chip-specific header files and low-level non-RTOS-aware APIs (such as rtc_ APIs). Some of the files from ESP32 component were also moved: cpu_util.c, brownout.c, and the corresponding header files. Further refactoring of ESP32 component into more meaningful layers (chip-specific low level functions; chip-specific RTOS aware functions; framework-specific RTOS-related functions) will be done in future MRs.

See merge request 
2017-04-12 10:38:23 +08:00
Ivan Grokhotkov
7ee8ee8b7e soc: add source code of rtc_clk, rtc_pm 2017-04-11 15:45:54 +08:00
Ivan Grokhotkov
d6dbf15a1f soc: move header files into soc component 2017-04-11 14:06:40 +08:00
Ivan Grokhotkov
724673be83 soc: add apb_ctrl, struct headers for rtc_cntl and rtc_io 2017-04-11 14:06:40 +08:00
Alexey Gerenkov
0860f46220 spi_flash: Fixed bug in SPI flash ROM driver to work with embedded flash chip
1) fixed SPI_read_status: added check for flash busy flag in matrix mode
2) fixed SPI_page_program: enable write before writing data to SPI FIFO
3) SPI flash ROM funcs replacement is controlled via menuconfig option
2017-04-11 10:51:19 +08:00
Ivan Grokhotkov
aa817a1475 Merge branch 'bugfix/esp_error_check_release_builds' into 'master'
fix warnings generated by ESP_ERROR_CHECK(variable) in release builds

This uses the same pattern as “assert” in release builds to silence the
warning. At the same time, we make sure that if a statement is wrapped
into ESP_ERROR_CHECK, it is executed in release build as well.

Fixes https://github.com/espressif/esp-idf/issues/497

See merge request 
2017-04-10 12:18:47 +08:00
Ivan Grokhotkov
275b574ace fix warnings generated by ESP_ERROR_CHECK(variable) in release builds
This uses the same pattern as “assert” in release builds to silence the
warning. At the same time, we make sure that if a statement is wrapped
into ESP_ERROR_CHECK, it is executed in release build as well.
2017-04-07 15:24:58 +08:00
Ivan Grokhotkov
85e709705b Merge branch 'bugfix/btdm_task_priority' into 'master'
component/bt : modify bluetooth task priority

modify bluetooth task priority to lower than IPC task priority.

See merge request 
2017-04-07 14:56:31 +08:00
Alexey Gerenkov
c142b9b9e5 esp32: RWDT is used to reboot system in case of panic handler crash
also fixes TG1WDG protection bug in panic handler
2017-04-07 02:34:29 +03:00
Tian Hao
ecb75b69fd component/bt : modify bluetooth task priority 2017-04-01 17:17:57 +08:00
XiaXiaotian
4f89cc73e6 Add WiFi static and dynamic tx buffer choice
If static tx buffer is selected, WiFi tx buffers are allocated when WiFi is initialized and released

    when WiFi is de-initialized. If dynamic tx buffer is selected, WiFi tx buffer is allocated when tx

    data is delivered from LWIP to WiFi and released when tx data is sent out by WiFi.

    The size of each static tx buffers is fixed to about 1.6KB and the size of dynamic tx buffers is

    depend on the length of the data delivered from LWIP.

    If PSRAM is enabled, "STATIC" should be selected to guarantee enough WiFi tx buffers.

    If PSRAM is disabled, "DYNAMIC" should be selected to improve the utilization of RAM.
2017-03-30 21:25:44 +08:00
Jiang Jiang Jian
73612b004f Merge branch 'feature/add_scan_time_config' into 'master'
wifi scan: add wifi scan type and time config



See merge request 
2017-03-30 20:56:30 +08:00
XiaXiaotian
c690447dd9 wifi scan: add wifi scan type and time config 2017-03-30 20:36:52 +08:00
Ivan Grokhotkov
41c6914454 Merge branch 'feature/ulp_toolchain' into 'master'
ULP coprocessor toolchain integration

- build system support for ULP coprocessor toolchain
- documentation for ULP coprocessor instruction set
- documentation for ULP code execution flow, loading programs, exchanging data
- example: counting pulses using ULP


See merge request 
2017-03-27 13:54:51 +08:00
Dmitry Yakovlev
a6e4e89592 ulp: add build system integration and example 2017-03-27 12:41:00 +08:00
Jiang Jiang Jian
8ee6f8227e Merge branch 'bugfix/reset_mac_cause_bt_cannot_rx_data' into 'master'
Reset WIFI mac when wifi start and update wifi lib

1. reset wifi mac when wifi start

2. roll back rx hung workaround for beacon timeout

3. fix amsdu ap interface wrong issue

4. fix amsdu header parse error

5. fix amsdu flag wrong issue

6. PHY: V350, fix BT rssi bug

7. RTC: V225, fix bt will be not work when wifi is reset

See merge request 
2017-03-24 17:02:26 +08:00
Ivan Grokhotkov
5cf9ccf6ab Merge branch 'feature/add_auth_type_for_wpa2_enterprise' into 'master'
wpa2: add authenticate type for wpa2 enterprise



See merge request 
2017-03-24 15:56:21 +08:00
Ivan Grokhotkov
573cc7d36f esp32: make soc header compatible with assembler 2017-03-24 10:11:14 +08:00
Angus Gratton
b9a06e68dd Merge branch 'bugfix/minor_fixes' into 'master'
Minor fixes and PRs cherry-picked from Github



See merge request 
2017-03-23 17:57:28 +08:00
XiaXiaotian
6181c39f05 Reset WIFI mac when wifi start and update wifi lib
1. reset wifi mac when wifi start

2. roll back rx hung workaround for beacon timeout

3. fix amsdu ap interface wrong issue

4. fix amsdu header parse error

5. fix amsdu flag wrong issue

6. PHY: V350, fix BT rssi bug

7. RTC: V225, fix bt will be not work when wifi is reset
2017-03-23 14:28:27 +08:00
Edmund Huber
0aab67f0aa esp32: esp_wifi.h: Replace a non-working #error statement with a working _Static_assert statement
Merges  https://github.com/espressif/esp-idf/pull/440
2017-03-22 15:01:40 +08:00
XiaXiaotian
a401169ea8 wpa2: add authenticate type for wpa2 enterprise 2017-03-17 17:28:01 +08:00
Wangjialin
7670e93639 Feature: add ledc low speed channels
1. Add low speed channels for LEDC module.
2. Improve fade object allocate mechanism.
3. Improve ledc example, add 2 low speed channels in example.
4. Remove debug code
5. Improve the register bit field name of slow clock.
2017-03-17 17:26:30 +08:00
Jeroen Domburg
dc6c19f560 Merge branch 'feature/tighter_rom_memory_defines' into 'master'
Use more regions reserved for ROM routines/stack we don't use for heap.

This frees up about 28K of RAM.

See merge request 
2017-03-09 20:25:07 +08:00
Jeroen Domburg
17a4a2527d MR things 2017-03-09 19:59:09 +08:00
Jiang Jiang Jian
cd4e4fb351 Merge branch 'feature/wifi_deinit_2' into 'master'
wifi deinit: update esp_wifi_deinit()

1. move ets_timer_deinit() to wifi_deinit()

2. delete wifi api mutex when wifi deinit

See merge request 
2017-03-09 15:35:36 +08:00
Jeroen Domburg
3462b53fbc MR suggestions 2017-03-08 19:27:30 +08:00
Jeroen Domburg
0db8b00b8a tight 28k 2017-03-08 19:04:28 +08:00
Ivan Grokhotkov
66c693eebb Merge branch 'feature/deep_sleep_wakeup_from_touch' into 'master'
add wakeup from touch sensor, and deep sleep example

- add new deep sleep wakeup mode
- change documentation to explain incompatibilities between different wakeup mode, add error checks
- add new ULP instructions necessary for ULP wakeup scenario
- fix issues with I_WR_REG, I_SLEEP, I_END instructions
- add deep sleep example, illustrating the use of timer, gpio, touch, and ULP wakeup triggers

See merge request 
2017-03-08 14:27:58 +08:00
XiaXiaotian
624ad1bd8b wifi deinit: update esp_wifi_deinit()
1. move ets_timer_deinit() to wifi_deinit()

2. delete wifi api mutex when wifi deinit
2017-03-08 11:00:02 +08:00
Jiang Jiang Jian
8b800df720 Merge branch 'feature/btdm_cfg_stack_size' into 'master'
component/bt: optimize stack size of Bluetooth Tasks and make them be configurab…

Bluetooth tasks' stack size are optimized and can be configured by the CONFIG_NEWLIB_NANO_FORMAT option.

See merge request 
2017-03-07 11:21:07 +08:00
wangmengyang
870389b3ba component/bt: optimize stack size of Bluetooth Tasks and make them be configurable according to the CONFIG_NEWLIB_NANO_FORMAT option 2017-03-06 23:09:42 +08:00
Ivan Grokhotkov
153472d70d Merge branch 'bugfix/soc_io_mux_h' into 'master'
esp32: update io_mux_reg.h to latest version

fixes https://github.com/espressif/esp-idf/issues/349

See merge request 
2017-03-06 22:36:19 +08:00
Angus Gratton
d6f183fbb9 esp_err: Use separate code path for ESP_ERROR_CHECK assertion
* Minimum code size overhead
* Makes function safe to use when flash cache is disabled

Builds on  https://github.com/espressif/esp-idf/pull/339
2017-03-03 15:33:23 +11:00
Angus Gratton
e08cf27b8a esp_err: add NDEBUG guard, comment about flash cache
Follow-up to 316b040
2017-03-03 14:59:15 +11:00
Neil Kolban
e14d65d704 Update to ESP_ERROR_CHECK
See request from ESP_Angus here:
https://esp32.com/viewtopic.php?f=18&t=1179

Merges  https://github.com/espressif/esp-idf/pull/339
2017-03-03 14:59:15 +11:00
Ivan Grokhotkov
848494b20f Merge branch 'feature/enable_qio_directly' into 'master'
Enable SPI flash Quad I/O in bootloader

Bootloader checks flash ID, enables Quad I/O mode based on flash type.

See merge request 
2017-03-03 11:25:52 +08:00
Ivan Grokhotkov
65b7b22c09 esp32: update io_mux_reg.h to latest version
fixes https://github.com/espressif/esp-idf/issues/349
2017-03-02 19:35:28 +08:00
Liu Zhi Fu
abdd8feebb esp32: menuconfig adds some WiFi options
1. Add options to enable/disable AMPDU
2. Add options to enable/disable WIFI NVS
3. Add options to configure WiFi RX/TX buffer number
2017-03-02 18:13:49 +08:00
Jiang Jiang Jian
3b8c9a407f Merge branch 'feature/add_user_set_mac' into 'master'
Feature/add user set mac

1. Add menuconfig for user to set mac address of wifi, bt and ethernet.
2. Add the number of MAC address generated from efuse for user to choose.
3. Add MAC address derive method.

See merge request 
2017-03-02 17:34:14 +08:00
Jeroen Domburg
432b25f755 Merge branch 'feature/in_isr_context' into 'master'
Add xPortInIsrContext function + unit test

As title states.

See merge request 
2017-03-02 17:17:23 +08:00
Jeroen Domburg
6739d5b99f Add xPortInIsrContext function + unit test. This function returns true when the current CPU runs in an interrupt handler context. 2017-03-02 17:00:32 +08:00
XiaXiaotian
d3eede2110 mac address: add the number of MAC address generated from efuse for user to choose
1. Add the number of MAC address generated from efuse for user to choose.

2. Add MAC address derive method.
2017-03-02 15:54:35 +08:00
XiaXiaotian
23f933a78d mac address: add user set mac address
add menuconfig for user to set mac address of wifi, bt and ethernet.
2017-03-01 20:42:46 +08:00
Angus Gratton
4d67a2ba8b esp32 phy_init: Move DPORT Wifi clock masks to macro values
Amended fix for c642079 
2017-03-01 12:11:57 +11:00
Angus Gratton
98f8594151 esp32 dport_reg.h: Fix typo in register bit names 2017-03-01 12:01:07 +11:00
qiyueixa
ff81e17504 wifi: fix issue in setting channel before sniffer is enabled 2017-02-24 15:19:31 +08:00
Ivan Grokhotkov
dbf60eb922 rtc: fix typo in RTC_CNTL_SLOWCLK_FREQ macro name 2017-02-22 14:40:36 +08:00
Ivan Grokhotkov
a64181f14f deep sleep: add functions to check wakeup cause
This change adds esp_deep_sleep_get_wakeup_cause, which returns the
source which has caused wakeup from deep sleep.

Similar to esp_deep_sleep_get_ext1_wakeup_status, a function is added
to check touch pad wakeup status: esp_deep_sleep_get_touchpad_wakeup_status.
This function returns the touch pad which has caused wakeup.
2017-02-22 14:40:36 +08:00
Ivan Grokhotkov
07ff47f103 deep sleep: clarify compatibility issues between wakeup sources
ULP and touch FSMs in ESP32 revisions 0 and 1 do not operate correctly
if RTC_PERIPH power domain is force powered on (ESP_PD_OPTION_ON).

Both ULP and touch still work, but clock frequency of the ULP may be
incorrect and touch values may be off by considerable amount. As such,
when these wakeup modes are used, RTC_PERIPH power domain has to be set
to ESP_PD_OPTION_AUTO (or, in the current implementation,
ESP_PD_OPTION_OFF — though this will change in the future when _OFF will
actually *force* the power domain to be powered off).

Because EXT0 wakeup source requires RTC_PERIPH to be powered ON, mark
ULP and touch wakeup sources as incompatible with EXT0. Workaround for
this is to use EXT1 wakeup source instead, which offers similar or
better functions without having to keep RTC_PERIPH powered on.
2017-02-22 14:40:36 +08:00
Wangjialin
fb261c0bd5 1. deal with conflicting wakeup triggers
2. modify deep_sleep.rst, add description of touch wakeup.
2017-02-22 14:40:36 +08:00
Wangjialin
cc13b0ea05 deep sleep: allow wakeup from touch sensor interrupt 2017-02-22 14:40:36 +08:00
Ivan Grokhotkov
26dec992eb deep sleep: add note about disabling WiFi and BT
This change adds a note to esp_deep_sleep that applications should disable WiFi and BT before going into deep sleep.
SNTP example is also updated.
2017-02-21 17:07:16 +08:00
XiaXiaotian
678ec0bd04 Merge branch 'master' of ssh://gitlab.espressif.cn:27227/idf/esp-idf into feature/disable_phy_rf_when_disable_wifi_bt 2017-02-21 01:20:48 +08:00
XiaXiaotian
bb0298bc71 coexist: enable coexist when wifi&bt are enabled, disable coexist when one of wifi&bt is disabled. 2017-02-20 23:53:25 +08:00
XiaXiaotian
8f3d1d3184 fix compile error that if enable CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION compile fail 2017-02-17 15:29:11 +08:00
Tian Hao
ad890aa5ea component/bt : wide range work temperature for bluetooth RF
1. add PLL track for bluetooth RF for wide range temperature
2. move some initialized codes to cache
2017-02-17 12:26:28 +08:00
XiaXiaotian
cd13c9e95d disable phy and rf
1. add a macro in menuconfig for users to choose whether store phy calibration data into NVS or not.

2. rename some disable phy and rf APIs so that existing code which calls old APIS will fail to compile.
2017-02-17 10:24:55 +08:00
XiaXiaotian
eb14284c92 disable PHY and RF when stop WiFi and disable BT
1. Add disable PHY and RF when WiFi and BT are both disabled(including call sniffer disable API).

2. Do not init PHY and RF when cpu start. Init PHY and RF when call Wifi or BT start APIs(including sniffer enable API).

3. Add a temporary lib: librtc_clk.a and will delete it when CPU frequency switching function is done.

4. Add an function to get OS tick rate.

5. Do not put the whole pp.a in iram0, only put lmac.o, ieee80211_misc.o, ets_time.o and wdev.o in iram0.
2017-02-17 10:24:54 +08:00
Angus Gratton
68cba2a1fb Bootloader: Support switching to Quad I/O mode during boot process 2017-02-09 08:44:05 +11:00
Dermot Duffy
6f3f3bb30c Add missing bit from LEDC interrupt state struct.
Resolves  https://github.com/espressif/esp-idf/pull/191
2017-01-20 14:57:24 +11:00
Angus Gratton
b022232e84 esp_panic.h: Add C++ include guards 2017-01-20 14:56:59 +11:00
Wu Jian Gang
f4d5d151aa esp32: add get idf version api 2017-01-17 16:52:42 +08:00
Ivan Grokhotkov
6538252552 Merge branch 'bugfix/panic_reset_hangs' into 'master'
Panic handler: Use same reset path as esp_restart(), disabling hardware

Closes  https://github.com/espressif/esp-idf/issues/223

See merge request 
2017-01-16 10:40:47 +08:00
Angus Gratton
ea19838d3a Build: Handle WiFi & BT enabled/disabled combos gracefully as possible
If using WIFI_INIT_CONFIG_DEFAULT, error message will point out lack
of WiFi. Otherwise linker errors on WiFi symbols should help give a
clue as to what is broken.

Piggy-backs on changes in , ref github  
2017-01-16 13:03:17 +11:00
Neil Kolban
3efbbab2cf wifi: fix typos, rename ESP_ERR_WIFI_NOT_START to ESP_ERR_WIFI_NOT_STARTED 2017-01-16 02:38:31 +08:00
Ivan Grokhotkov
ca9f62ad77 Merge branch 'feature/esp32_core_dump' into 'master'
esp32 core dump to flash

1.  menuconfig option to select where to store core dump: flash, uart or disable
2. Saving of core dump to flash
3. Partition table definitions files with core dump partition
4. Python scripts to support core dump generation from GDB command line

See merge request 
2017-01-13 11:51:40 +08:00
Angus Gratton
e53d307814 Panic handler: Use same reset path as esp_restart(), disabling hardware
Closes  https://github.com/espressif/esp-idf/issues/223
2017-01-13 14:37:36 +11:00
Ivan Grokhotkov
b24ac487cb newlib: use RTC_STORE registers to keep boot time instead of RTC_SLOW_MEM
This allows RTC_SLOW_MEM to be powered down in deep sleep if no other variables are placed into RTC_SLOW_MEM.
2017-01-12 14:43:34 +08:00
Ivan Grokhotkov
9aa0e29079 deep sleep: keep RTC_SLOW_MEM powered on if data is placed into RTC slow memory 2017-01-12 14:15:30 +08:00
Ivan Grokhotkov
e4811216ff deep sleep: fix regression due to moving ets_update_cpu_frequency into IRAM
Deep sleep stub may call ets_update_cpu_frequency, which has been moved from ROM to IRAM.
Restore the ROM version in the linker script, call it ets_update_cpu_frequency_rom, use it in the deep sleep stub.
2017-01-12 14:15:25 +08:00
Alexey Gerenkov
50b3ce616f esp32: Adds documentation and comments to core dump feature files 2017-01-11 20:51:28 +03:00
Alexey Gerenkov
39ddc7b836 esp32: Fixes several issues in core dump feature
1) PS is fixed up to allow GDB backtrace to work properly
2) MR!341 discussion: in core dump module: esp_panicPutXXX was replaced by ets_printf.
3) MR!341 discussion: core dump flash magic number was changed.
4) MR!341 discussion: SPI flash access API was redesigned to allow flexible critical section management.
5) test app for core dump feature was added
6) fixed base64 file reading issues on Windows platform
7) now raw bin core file is deleted upon core loader failure by epscoredump.py
2017-01-11 20:51:28 +03:00
Alexey Gerenkov
23f836659d esp32: Add core dump printing to UART feature 2017-01-11 20:51:28 +03:00
Alexey Gerenkov
4a3e160888 esp32: Add core dump saving to flash feature
Complimentary changes:
1) Partition table definitions files with core dump partition
2) Special sub-type for core dump partition
3) Special version of spi_flash_xxx
4) espcoredump.py is script to get core dump from flash and print useful info
5) FreeRTOS API was extended to get tasks snapshots
2017-01-11 20:51:28 +03:00
Jiang Jiang Jian
478591b842 Merge branch 'feature/add_wpa2_set_id_api' into 'master'
add wpa2 set id api and modify null data tx description

1. wpa2: add wpa2 set id api

2. low rate: modify null data tx description

See merge request 
2017-01-11 15:13:47 +08:00
Jiang Jiang Jian
63091a2358 Merge branch 'feature/ethernet_support_flow_control' into 'master'
ethernet: support flow control

(1) Only fullduplex mode support flow ctrl .

(2) Fix reboot exception which caused by not-reset EMAC hardware (such as DMA) when reset CPU.

See merge request 
2017-01-11 14:51:43 +08:00
XiaXiaotian
b455b0246c add wpa2 set id api and modify null data tx description
1. wpa2: add wpa2 set id api

2. low rate: modify null data tx description
2017-01-11 12:13:11 +08:00
Ivan Grokhotkov
a2e0c2432e esp32: sanity check ISR handler address passed into esp_intr_alloc
Return ESP_ERR_INVALID_ARG if the handler is not in IRAM (or RTC fast memory)
2017-01-11 11:38:17 +08:00
shangke
0e701e1cac ethernet: support flow control 2017-01-10 15:19:18 +08:00
Jeroen Domburg
881157e1ed Add documentation to panic handler functions, move watchpoint stuff from tasks.c to port.c, account for non-32-bytes-aligned stacks when setting watchpoint, add debug reason explanation to panic handler 2017-01-10 13:05:19 +08:00
Jeroen Domburg
ca57a86f20 Add option to automatically set a watchpoint at the end of the swapped-in task 2017-01-09 16:42:45 +08:00
Ivan Grokhotkov
5b5a4355e7 Merge branch 'feature/sd_driver_new' into 'master'
SDMMC peripheral driver, SD protocol driver, FATFS library, VFS integration

This MR contains:
- SDMMC host peripheral driver
- SD protocol driver in sdmmc component (can be extended to support MMC/eMMC and SPI based hosts)
- ChaN's FATFS library v0.12b
- VFS integration
- FAT access via VFS is thread-safe (unless same file is read/written/unlinked/renamed from different tasks)
- Support for POSIX directory-related functions in VFS (and in vfs_fatfs.c)
- unit test for the above
- Example
- API documentation

Will be done in other MRs:
- Support for spi_flash IO driver for FatFs
- SPI host driver and support for SPI mode commands in sdmmc component
- MMC/eMMC support in sdmmc component
- Support for slightly higher 53/26.6MHz clocks (currently I'm using 20MHz for DS and 40MHz for HS, instead of 25MHz/50MHz per standard), and arbitrary low clocks (e.g. 4MHz).

See merge request 
2017-01-09 06:48:25 +08:00
Ivan Grokhotkov
edd924f273 sdmmc: add peripheral driver and protocol layer 2017-01-09 04:51:24 +08:00
Ivan Grokhotkov
339267ffc9 Merge branch 'feature/bootloader_rng' into 'master'
Enable bootloader entropy source for RNG

Enables an entropy source when bootloader starts up, which both seeds the RNG for use before WiFi/BT stack is enabled and provides an adequate RNG for secure boot & flash encryption key generation.

A prerequisite was enabling 80MHz operation, so the CPU is now set to 80MHz as soon as second stage bootloader starts running.

See merge request 
2017-01-07 18:46:10 +08:00
Jeroen Domburg
23455de4c2 Add SPI Master driver, example, test and docs 2017-01-06 14:20:32 +08:00
Wu Jian Gang
e2d05d8592 Merge branch 'feature/wifi_deinit' into 'master'
wifi: add wifi rx buffer number config in menuconfig



See merge request 
2017-01-06 13:32:25 +08:00
XiaXiaotian
7853893731 wifi: add wifi rx buffer number config in menuconfig 2017-01-06 10:12:27 +08:00
Ivan Grokhotkov
ded13ac8e6 Merge branch 'feature/btdm_blufi' into 'master'
Feature/btdm blufi

This is new BLUFI for config wifi connection through bluetooth.


See merge request 
2017-01-05 21:54:45 +08:00
wangmengyang
2e7748d625 component/bt: modify bluetooth API
1. VHCI api and doxygen
2. Controller api and doxygen
3. bluedroid init/enable api and doxygen
4. cleanup demo codes
2017-01-05 20:02:06 +08:00
qiyueixa
5677149833 esp32: add wifi low rate feature
1. add low_rate_enable flag to scan results to identify if AP low rate is enabled.
2. add WIFI_PROTOCOL_LR for users to enable low rate feature.
2017-01-05 18:22:07 +08:00
Liu Zhi Fu
be994740b4 Merge branch 'master' of ssh://gitlab.espressif.cn:27227/idf/esp-idf into feature/throughput_optimization_phrase_1 2017-01-05 11:37:56 +08:00
Liu Zhi Fu
0fb2ab9f5c lwip/freertos/esp32: add throughput optimization related code
1. Update wifi lib which contains ampdu and other optimizations
2. Add throughput code debug code
3. Other misc modification about throughput optimization
2017-01-05 11:37:08 +08:00
Angus Gratton
3922ce47b2 bootloader: Enable early boot RNG entropy source
This reverts commit ceb8566970.
2017-01-04 17:07:12 +11:00
Wang Jia Lin
bf3093feca Merge branch 'driver_merge_tmp/merge_i2c' into 'master'
driver: i2c code

1. add i2c master code
2. add i2c slave code
3. add i2c example code

See merge request 
2017-01-03 16:44:08 +08:00
Angus Gratton
2407faf6c6 Merge branch 'feature/print_halt_abort' into 'master'
panic handlers: Print the PC address where abort() was called, don't dump registers



See merge request 
2017-01-03 13:44:34 +08:00
Wangjialin
9c7cc86793 1. modify i2c_set_pin function
2. update example comments and other minor changes
3. rename API:  i2c_cmd_link_create/i2c_cmd_link_delete (+4 squashed commits)

Squashed commits:
[2e0ac3e] 1. coding style: add one space after condition key words.
2. modify i2c.h, use gpio_num_t instead of int, improve comments of return values
3. add i2c index in index.rst
4. add readme for i2c example
[4991d92] update i2c.doc
[88b672e] driver: i2c

1. add mux and spin lock to run in a thread-safe way.
2. modify example code
[4eb15fe] driver: i2c code

1. add i2c master code
2. add i2c slave code
3. add i2c example code
4. add DRAM_ATTR for I2C array
2017-01-03 00:57:19 +08:00
Angus Gratton
3cfe738fcf Merge branch 'bugfix/minor_issues' into 'master'
Bugfixes from Github

Many small fixes for open github issues.

See merge request 
2016-12-28 13:18:34 +08:00
Angus Gratton
1e44f72e98 esp_wifi_init: Update comment about init event_q
Closes github  https://github.com/espressif/esp-idf/issues/28
2016-12-28 10:17:56 +11:00
Angus Gratton
c1a6d55116 WiFi interface: SSID and password fields should be uint8_t in all cases
Closes github  https://github.com/espressif/esp-idf/issues/40
2016-12-28 10:17:56 +11:00
Angus Gratton
da977149f6 panic handlers: Print the PC address where abort() was called, don't dump registers 2016-12-28 10:09:40 +11:00
Angus Gratton
198889ad26 bootloader: Check if DRAM segments are going to collide with stack 2016-12-20 16:14:07 +11:00
Wangjialin
b00b75db7e driver: sigma-delta
1. add sigma-delta code and example.
2. add gpio output signal in io matrix.

Squashed commits:
[a25e7d4] minor changes for doc
[6a03a1e] minor changes on comments and doc.
[97dd9e4] Add doc.
update index.rst
change example index
2016-12-18 17:20:17 +08:00
Ivan Grokhotkov
628bad1dbf deep sleep: add documentation 2016-12-16 14:31:29 +08:00
Ivan Grokhotkov
370f4b8556 deep sleep: set pin configuration right before entering deep sleep
This change allows setting pin configuration for EXT1 wakeup depending on the state of RTC_PERIPH power domain:
- if peripherals are enabled (due to another wakeup mode, or due to esp_deep_sleep_pd_config call), we can keep internal pullups/pulldowns enabled
- if peripherals are disabled, pullups and pulldowns need to be disabled as well

Also add comments about the purpose of registers being configured.
2016-12-16 14:30:27 +08:00
Ivan Grokhotkov
609d852834 deep sleep: power down RTC peripherals in EXT1 sleep 2016-12-16 14:30:27 +08:00