morris
631e15c6eb
feat(ldo): add config to let hardware control the ldo output
...
If LDO1 is used by spi flash, then we recommend to give the ownership to
the hardware. Software just read the parameters from the efuse and set
to PMU.
2024-08-13 14:50:38 +08:00
C.S.M
17f814acf3
fix(spi_flash): Add external flash support on esp32c6,esp32h2,esp32p4,esp32c5
2024-07-30 11:10:29 +08:00
C.S.M
374c89097f
feat(spi_flash): Adjust flash clock to real 80M clock, and support 32bit address on eco1
2024-05-27 19:42:47 +08:00
wanlei
8762c4d1df
fix(spi_flash): replace gpio_hal_iomux_func_sel
2024-05-23 16:29:22 +08:00
wanlei
535afdd7f4
feat(esp32c61): ci enable header check, fix c61 build
2024-03-27 19:39:59 +08:00
morris
5369b68bc8
change(flash): acquire the LDO channel used by flash
...
so that even if the same channel has other consumers, the voltage won't
be changed
2024-03-25 22:04:01 +08:00
Armando
13167d8479
change(flash): rename spi_timing_is_tuned to spi_flash_timing_is_tuned
2024-01-10 11:52:28 +08:00
Marius Vikhammer
52e3f09b32
refactor(spi): moved spi hw sharing func to hw support
...
Common spi functionality for sharing the SPI bus between modules is moved from esp_driver_spi to
a more fitting location in esp_hw_support (shared HW resource control).
This also allows us to decouple the spi_flash driver from esp_driver_spi, removing
esp_driver_spi and esp_ringbuf from G1 builds.
2023-11-20 12:07:54 +08:00
Cao Sen Miao
dcff5220a7
feat(spi_flash): Support configurable tSUS in flash suspend
2023-11-06 18:04:43 +08:00
Xiao Xufeng
1f5fb3f921
spi_flash: fixed issue that enabling HPM-DC by default may cause app unable to restart
2023-10-24 10:38:08 +08:00
Cao Sen Miao
ed96dadd06
spi_flash: 2nd stage for supporting flash suspend. (1). Support more esp chips (2). Improve real-time performance (3). Making timing more stable (4) Add documents
2023-05-11 20:10:30 +08:00
Armando
8eec6558d1
mspi: refactor timing tuning driver to make it compatible with p4
2023-05-04 17:05:35 +08:00
laokaiyao
b7053b46ef
esp32h4: remove esp32h4 target from peripherals
2023-04-20 15:19:45 +08:00
gaoxu
542a61b6cb
support SPI_FLASH_ENABLE_COUNTERS feature on esp_flash driver and rename the functions to esp_flash_xx
2023-04-06 11:40:40 +08:00
Cao Sen Miao
bc655a6890
spi_flash: Allow clock frequency up to 64M, and make it default on ESP32H2
2023-03-10 11:39:53 +08:00
Cao Sen Miao
4713a9a7f2
ESP32H2: Introduce new chip target esp32h2, hello_world example supported
2022-12-29 12:29:14 +08:00
Cao Sen Miao
fa3a8fdd91
esp_flash: correct veriable 'size' description
2022-11-28 16:54:03 +08:00
C.S.M
54d9da987a
Merge branch 'bugfix/flash_large_memory_size' into 'master'
...
spi_flash: Fix issue that cannot get accurate flash size when encounter large size memory
Closes IDFGH-8063
See merge request espressif/esp-idf!20738
2022-11-22 16:07:17 +08:00
laokaiyao
8677216576
esp32h2: renaming esp32h2 to esp32h4
2022-11-08 17:05:33 +08:00
Cao Sen Miao
b4964279d4
spi_flash: Fix issue that cannot get accurate flash size when encounter large size memory,
...
Closes https://github.com/espressif/esp-idf/pull/9566
2022-10-31 11:05:36 +08:00
Cao Sen Miao
2c9bb4eb7d
spi_flash: Support select flash mode automatically at run time(Quad flash or Octal flash)
2022-10-18 11:25:35 +08:00
wuzhenghui
ff8dd1e1a8
esp32c6: add spi_flash support
2022-09-26 20:32:13 +08:00
Cao Sen Miao
ec6a56ed0c
spi_flash: re-enable the HPM mode on several XMC chips
2022-07-22 09:54:56 +08:00
Cao Sen Miao
a690a87829
spi_flash: Remove legacy spi_flash drivers
2022-07-01 11:01:34 +08:00
Armando
f31d88e3fe
spi: move spi_common_internal to esp_private
2022-06-24 19:12:13 +08:00
Cao Sen Miao
4418a855ba
spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2
2022-04-26 15:22:37 +08:00
Michael (XIAO Xufeng)
46b5363e39
spi_flash: forbid writing to main flash when using invalid init arguments
...
Also refactored the init code to make the logic of device (CS) acquiring
more centralized.
Resolves: https://github.com/espressif/esp-idf/issues/8556
2022-04-13 18:02:34 +08:00
songruojing
c8c137f2b7
esp32h2: support GPIO peripheral, IO_MUX, GPIO matrix.
...
Generic GPIO example is supported as well.
2022-03-04 11:25:05 +08:00
laokaiyao
cf049e15ed
esp8684: rename target to esp32c2
2022-01-19 11:08:57 +08:00
Cao Sen Miao
3a4db97cec
spi_flash: move patch files to common rom patch folder
2021-12-30 14:05:12 +08:00
Cao Sen Miao
3dd1cfea18
spi_flash: refactor spi_flash.h to decline duplicated code
2021-12-30 14:05:12 +08:00
Cao Sen Miao
3934e24d22
ESP8684: add spi_flash, efuse, hw_support support
2021-11-06 17:33:44 +08:00
Armando
c331c85318
mspi: make cpu clock source switch safe
...
For some of the MSPI high frequency setting (e.g. 80M DDR mode Flash or PSRAM), timing tuning is required.
Certain delays will be added to the MSPI RX direction. When system clock switches down, the delays should be
cleared. When system clock switches up, the delays should be restored.
2021-10-19 21:47:27 +08:00
Armando
2655a506c9
mspi: support auto detect octal flash vendor
2021-10-08 15:59:57 +08:00
Cao Sen Miao
6c0aebe279
esp_flash: add opi flash support in esp_flash chip driver, for MXIC
2021-09-07 14:44:40 +08:00
Cao Sen Miao
559c1ac3f9
esp_flash: add support mxic as a main flash under spi mode
2021-09-05 00:33:28 +08:00
Armando
d325f4d557
mspi: support octal flash 120M STR mode on esp32s3
2021-08-19 10:44:30 +08:00
Shu Chen
6fce2930d0
esp32h2: enable more components to support esp32h2
...
Involved components:
* app_trace
* esp-tls
* esp_adc_cal
* esp_pm
* esp_serial_slave_link
* esp_timer
* freertos
* idf_test
* log
* mbedtls
* newlib
* perfmon
* spi_flash
* spiffs
* ulp
* unity
* vfs
2021-07-01 19:53:11 +08:00
Cao Sen Miao
08f1bbe0c7
spi_flash: fix cs line setup to make the flash driver more stable
2021-06-01 16:41:41 +08:00
Michael (XIAO Xufeng)
8cfcf6da7a
Merge branch 'bugfix/enable_gpio18_gpio19_esp32c3' into 'master'
...
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
Closes IDF-2964
See merge request espressif/esp-idf!12753
2021-04-12 09:39:55 +00:00
Omar Chebib
cd79f3907d
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
...
When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible
to set pins 18 and 19 as GPIOs. This commit solves this by manually
disabling USB JTAG when using pins 18 or 19.
The functions shall use `gpio_hal_iomux_func_sel` instead of
`PIN_FUNC_SELELECT`.
2021-04-08 14:01:18 +08:00
Armando
9b9ea71ff9
spi: remove HSPI macro on esp32c3 and esp32s3
2021-04-06 13:42:49 +08:00
Cao Sen Miao
9905da46e0
spi_flash: Add auto suspend mode on esp32c3
2021-01-25 11:14:02 +08:00
KonstantinKondrashov
1f37a5f162
spi_flash(esp32-s2): Add the workaround of a reboot issue when SPI HW suspend is enabled
2021-01-25 11:13:38 +08:00
KonstantinKondrashov
60e58eaddb
spi_flash: Add auto-suspend mode for ESP32-S2
...
Uses HW auto_wait_idle, HW auto_suspend and SW resume
2021-01-25 11:13:38 +08:00
Michael (XIAO Xufeng)
7f3e61cf63
esp_flash: add support for external flash on C3
2020-12-22 13:31:04 +08:00
Angus Gratton
06ec032c0c
spi_flash: Simplify init-time size check
2020-12-17 15:34:13 +11:00
Angus Gratton
d4c9a45675
spi_flash: Add ESP32-C3 support
...
Based on internal commit 3ef01301fff
2020-12-17 15:34:13 +11:00
Angus Gratton
5228d9f9ce
esp32c3: Apply one-liner/small changes for ESP32-C3
2020-12-01 10:58:50 +11:00
Michael (XIAO Xufeng)
3bacf35310
esp_flash: support high capacity flash chips (32-bit address)
2020-10-29 18:20:11 +08:00