alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

esp_flash: add support for external flash on C3

Browse Source
This commit is contained in:
Michael (XIAO Xufeng) 2020-12-16 14:21:06 +08:00
parent 7ed95d13b1
commit 7f3e61cf63
4 changed files with 41 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
components/hal/CMakeLists.txt
View File

@ -85,6 +85,7 @@ if(NOT BOOTLOADER_BUILD)
"esp32c3/brownout_hal.c"
"esp32c3/systimer_hal.c"
"esp32c3/hmac_hal.c"
"spi_flash_hal_gpspi.c"
"spi_slave_hd_hal.c")
endif()
endif()

39
components/hal/esp32c3/include/hal/gpspi_flash_ll.h
View File

@ -60,6 +60,15 @@ static inline void gpspi_flash_ll_reset(spi_dev_t *dev)
{
dev->user.val = 0;
dev->ctrl.val = 0;
dev->clk_gate.clk_en = 1;
dev->clk_gate.mst_clk_active = 1;
dev->clk_gate.mst_clk_sel = 1;
dev->dma_conf.val = 0;
dev->dma_conf.tx_seg_trans_clr_en = 1;
dev->dma_conf.rx_seg_trans_clr_en = 1;
dev->dma_conf.dma_seg_trans_en = 0;
}
/**
@ -71,7 +80,7 @@ static inline void gpspi_flash_ll_reset(spi_dev_t *dev)
*/
static inline bool gpspi_flash_ll_cmd_is_done(const spi_dev_t *dev)
{
return (dev->cmd.val == 0);
return (dev->cmd.usr == 0);
}
/**
@ -139,6 +148,8 @@ static inline void gpspi_flash_ll_set_buffer_data(spi_dev_t *dev, const void *bu
*/
static inline void gpspi_flash_ll_user_start(spi_dev_t *dev)
{
dev->cmd.update = 1;
while (dev->cmd.update);
dev->cmd.usr = 1;
}
@ -151,7 +162,7 @@ static inline void gpspi_flash_ll_user_start(spi_dev_t *dev)
*/
static inline bool gpspi_flash_ll_host_idle(const spi_dev_t *dev)
{
abort(); //TODO ESP32-C3 IDF-2204
return dev->cmd.usr == 0;
}
/**
@ -198,10 +209,10 @@ static inline void gpspi_flash_ll_set_read_mode(spi_dev_t *dev, esp_flash_io_mod
ctrl.val &= ~(SPI_FCMD_QUAD_M | SPI_FADDR_QUAD_M | SPI_FREAD_QUAD_M | SPI_FCMD_DUAL_M | SPI_FADDR_DUAL_M | SPI_FREAD_DUAL_M);
user.val &= ~(SPI_FWRITE_QUAD_M | SPI_FWRITE_DUAL_M);
// ctrl.val |= SPI_FAST_RD_MODE_M;
switch (read_mode) {
case SPI_FLASH_FASTRD:
//the default option
case SPI_FLASH_SLOWRD:
break;
case SPI_FLASH_QIO:
ctrl.fread_quad = 1;
@ -221,9 +232,6 @@ static inline void gpspi_flash_ll_set_read_mode(spi_dev_t *dev, esp_flash_io_mod
ctrl.fread_dual = 1;
user.fwrite_dual = 1;
break;
// case SPI_FLASH_SLOWRD:
// ctrl.fast_rd_mode = 0;
// break;
default:
abort();
}
@ -251,7 +259,10 @@ static inline void gpspi_flash_ll_set_clock(spi_dev_t *dev, gpspi_flash_ll_clock
*/
static inline void gpspi_flash_ll_set_miso_bitlen(spi_dev_t *dev, uint32_t bitlen)
{
abort(); //TODO ESP32-C3 IDF-2204
dev->user.usr_miso = bitlen > 0;
if (bitlen) {
dev->ms_dlen.ms_data_bitlen = bitlen - 1;
}
}
/**
@ -263,7 +274,10 @@ static inline void gpspi_flash_ll_set_miso_bitlen(spi_dev_t *dev, uint32_t bitle
*/
static inline void gpspi_flash_ll_set_mosi_bitlen(spi_dev_t *dev, uint32_t bitlen)
{
abort(); //TODO ESP32-C3 IDF-2204
dev->user.usr_mosi = bitlen > 0;
if (bitlen) {
dev->ms_dlen.ms_data_bitlen = bitlen - 1;
}
}
/**
@ -356,9 +370,16 @@ static inline void gpspi_flash_ll_set_dummy_out(spi_dev_t *dev, uint32_t out_en,
dev->ctrl.d_pol = out_lev;
}
/**
* Set extra hold time of CS after the clocks.
*
* @param dev Beginning address of the peripheral registers.
* @param hold_n Cycles of clocks before CS is inactive
*/
static inline void gpspi_flash_ll_set_hold(spi_dev_t *dev, uint32_t hold_n)
{
abort(); //TODO ESP32-C3 IDF-2204
dev->user1.cs_hold_time = hold_n - 1;
dev->user.cs_hold = (hold_n > 0? 1: 0);
}
#ifdef __cplusplus

5
components/spi_flash/esp_flash_spi_init.c
View File

@ -117,7 +117,7 @@ static IRAM_ATTR NOINLINE_ATTR void cs_initialize(esp_flash_t *chip, const esp_f
if (use_iomux) {
PIN_FUNC_SELECT(iomux_reg, spics_func);
} else {
#if CONFIG_IDF_TARGET_ESP32C3
#if SOC_GPIO_PIN_COUNT <= 32
GPIO.enable_w1ts.val = (0x1 << cs_io_num);
#else
if (cs_io_num < 32) {
@ -141,6 +141,9 @@ esp_err_t spi_bus_add_flash_device(esp_flash_t **out_chip, const esp_flash_spi_d
if (out_chip == NULL) {
return ESP_ERR_INVALID_ARG;
}
if (!GPIO_IS_VALID_OUTPUT_GPIO(config->cs_io_num)) {
return ESP_ERR_INVALID_ARG;
}
esp_flash_t *chip = NULL;
memspi_host_inst_t *host = NULL;
esp_err_t ret = ESP_OK;

14
components/spi_flash/memspi_host_driver.c
View File

@ -12,6 +12,7 @@
// See the License for the specific language governing permissions and
// limitations under the License.
#include "soc/soc_caps.h"
#include "spi_flash_defs.h"
#include "memspi_host_driver.h"
#include "string.h"
@ -19,12 +20,13 @@
#include "cache_utils.h"
#include "esp_flash_partitions.h"
#define SPI_FLASH_HAL_MAX_WRITE_BYTES 64
#define SPI_FLASH_HAL_MAX_READ_BYTES 64
DRAM_ATTR static const spi_flash_host_driver_t esp_flash_default_host = ESP_FLASH_DEFAULT_HOST_DRIVER();
#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
#if SOC_MEMSPI_IS_INDEPENDENT
extern void spi_flash_hal_gpspi_poll_cmd_done(spi_flash_host_inst_t *host);
extern esp_err_t spi_flash_hal_gpspi_device_config(spi_flash_host_inst_t *host);
esp_err_t spi_flash_hal_gpspi_configure_host_io_mode(
@ -64,18 +66,14 @@ static const spi_flash_host_driver_t esp_flash_gpspi_host = {
esp_err_t memspi_host_init_pointers(memspi_host_inst_t *host, const memspi_host_config_t *cfg)
{
#ifdef CONFIG_IDF_TARGET_ESP32
host->inst.driver = &esp_flash_default_host;
#elif CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
#if SOC_MEMSPI_IS_INDEPENDENT
if (cfg->host_id == SPI_HOST)
host->inst.driver = &esp_flash_default_host;
else {
host->inst.driver = &esp_flash_gpspi_host;
}
#elif CONFIG_IDF_TARGET_ESP32C3
if (cfg->host_id == SPI_HOST) {
host->inst.driver = &esp_flash_default_host;
}
#else
host->inst.driver = &esp_flash_default_host;
#endif
esp_err_t err = spi_flash_hal_init(host, cfg);