This commit adds the ability to set the core affinity for the FreeRTOS
Timer Service task when multi-core configuration is enabled. This commit
also adds a Kconfig option to set the core affinity of the timer task
via the menuconfig.
Closes https://github.com/espressif/esp-idf/issues/10315
This commit adds a taskVALID_CORE_ID() macro, similar to the one offered in
Amazon SMP FreeRTOS.
- Various functions have been updated to use that macro
- Removed some unecessary static asserts of CONFIG_FREERTOS_NO_AFFINITY and
added casting.
- Uncrustify changes
It was noticed that when high level compiler optimizations are enabled,
the compiler optimizes some list manupulation code. This commit enables
the configLIST_VOLATILE for list elements to prevent the compiler from
optimizing out essential kernel code.
Revert "fix(freertos/idf): Add workaround for same priority preemption in xTaskIncrementTick()"
Closes IDF-8428
See merge request espressif/esp-idf!26732
This commit refactors some of the thread safety convenience macros by removing
some repeated definitions and keeping them all in "freertos_idf_additions_priv.h"
This commit mainly targets the ESP32-P4. It adds supports for coprocessors on
RISC-V based targets. The coprocessor save area, describing the used coprocessors
is stored at the end of the stack of each task (highest address) whereas each
coprocessor save area is allocated at the beginning of the task (lowest address).
The context of each coprocessor is saved lazily, by the task that want to use it.
This commit does the following:
- Update doxygen comments in FreeRTOS headers to remove unsupported doxygen
labels and internal functions
- Fixed existing doxygen warnings in FreeRTOS headers
This commit temporarily disables a bugfixed introduced by FreeRTOS v10.5.1 that
ensures timed out tasks will only preempt if their priority is higher than the
currently running task.
This bugfix has been temporarily reversed due to some compatibility issues with
some IDF tests.
This commit adds a workaround for a compiler optimization issue in FreeRTOS
v10.5.1 in xTaskResumeAll() where pxTCB is only read once, even if in a loop.
A follow up ticket has been added to properly resolve this issue.
This commit optimizes the following utility functions to achieve higher
overall system performance:
xTaskGetCurrentTaskHandle():
- Made into stand alone function instead of wrapper call to "ForCore" variant
- Replaced critical sections with disabling interrupts. Lack of lock contention
improves performance.
xTaskGetCurrentTaskHandleForCore():
- Removed unecessary critical sections
xTaskGetSchedulerState():
- Replaced critical sections with disabling interrupts. Lack of lock contention
improves performance.
Various convenience macros in tasks.c will simply leave macro arguments unused
when built for single-core. This leads to an 'unused variable' warning.
This commit updates those macrso so that the unused arguments have a
'(void)' statement.
Following the upgrade to FreeRTOS kernel v10.5.1, this commit updates the
version numbers, licenses, and SBOM files of FreeRTOS files to reflect v10.5.1.
Note:
- Updated licenses as v10.5.1 now uses SPDX format
- Removed CVE-2021-43997 as it was fixed post v10.4.5
This commit makes v10.5.1 the default FreeRTOS kernel in ESP-IDF by removing
the CONFIG_FREERTOS_USE_KERNEL_10_5_1 option and v10.4.3 specific code
blocks.
This commit removes the v10.4.3 kernel files in prepartion for upgrading to
v10.5.1.
- Portable files still remain
- Added as a separate commit to preserve commit history
This commit fixes an issue where xPortCanYield() function may not be
able to detect an ISR context when HW interrupt nesting is active on
a CLIC interrupt controller such as on esp32p4.
This commit adds beta support for the FreeRTOS v10.5.1 kernel which can be
enabled by enabling the CONFIG_FREERTOS_USE_KERNEL_10_5_1 option.
The following changes have been made:
- Updated freertos/CMakeLists.txt to build v10.5.1 kernel with v10.4.3. ports
- Updated existing Xtensa and RISC-V ports to work with V10.5.1
- Modifications to other ESP-IDF components to work with v10.5.1
- Added some ESP-IDF specific tracing changes to v10.5.1 kernel
- Make CONFIG_FREERTOS_USE_KERNEL_10_5_1 a public option
Note: The beta release is missing some minor fixes, performance improvements,
and features. Using this beta release for production is not recommended.
Closes https://github.com/espressif/esp-idf/issues/7137
This commit moves/merges the IDF FreeRTOS "PinnedToCore" task creation
functions from tasks.c/task.h to idf_additions.h/freertos_task_c_additions.h.
Also updated FreeRTOS Mock component to provide mocks for "idf_additions.h"
headers for our mock tests.
A weak xTimerCreateTimerTask() was added to tasks.c as a workaround in ESP-IDF
in order to prevent timers.c from being linked when unused.
This commit moves that workaround to `freertos_tasks_c_additions.h`
The following application hook protoypes are defined in task.h from FreeRTOS
V10.4.0 onwwards and no longer need to be declared in tasks.c, thus have been
removed:
- vApplicationStackOverflowHook()
- vApplicationTickHook()
- vApplicationGetIdleTaskMemory()
This function moves ulTaskNotifyTake()/xTaskNotifyWait() from IDF FreeRTOS
`tasks.c` to `freertos_compatibility.c`. These functions were kept for
pre-compiled library compatibilty. Move them reduces the kernel source code
difference when compared to upstream FreeRTOS.
This commit combines various task utility API additions in IDF FreeRTOS and with
their Amazon SMP FreeRTOS addition counterparts. The folloiwng functions have
been moved to freertos_tasks_c_additions.h and idf_additions.h as these API
are considered public:
- xTaskGetCurrentTaskHandleForCPU()
- xTaskGetIdleTaskHandleForCPU()
- xTaskGetAffinity()
- pxTaskGetStackStart()
Also fixed in missing #if macros when vTaskCoreAffinityGet() is called in
Amazon SMP FreerTOS tests.
This commit moves xTaskIncrementTickOtherCores() to freertos_tasks_c_additions.h
and freertos_idf_additions_priv.h (as API is private). This reduces the code
differences cmpared to upstream FreeRTOS.
- The following IDF API additions are moved to freertos_tasks_c_additions.h
(implementation) and freertos_idf_additions_priv.h (declaration) as APIs are
private. This reduces the source code difference from upstream.
- prvENTER_CRITICAL_OR_SUSPEND_ALL()
- prvEXIT_CRITICAL_OR_RESUME_ALL()
- prvENTER_CRITICAL_OR_MASK_ISR()
- prvEXIT_CRITICAL_OR_UNMASK_ISR()
- vTaskTakeKernelLock()
- vTaskReleaseKernelLock()
- Rename vTask[Take/Release]KernelLock() to prv[Take/Release]KernelLock() to
indicate that the this API is private.
This commit adds an implicit inclusion of `idf_additions.h` to `FreeRTOS.h` in
preparation for moving some IDf specific API to `idf_additions.h`.
This implict inclusion allows existing code to be continue using these
relocated APIs without any changes in header inclusions.
Also removed "#pragma once" directive from "freertos_tasks_c_additions.h" since
that header is included as a source file.
Fixed an undiscovered bug with prvENTER_CRITICAL_OR_MASK_ISR() and
prvEXIT_CRITICAL_OR_MASK_ISR() where the `uxInterruptStatus` argument was not
used.
However, all calls of this macro provide a local `uxSavedInterruptStatus`
variable, leading to this bug being hidden.
This commit updates the xPortCanYield() for esp32p4 by correcting the
return condition. Previously, the API would return true if an ISR of
priority 1 was received which is incorrect.
Previously, TLSP deletion callbacks were...
- Stored in a seprate TCB member "pvThreadLocalStoragePointersDelCallback"
- Called separately via multipole prvDeleteTLS() insertions in tasks.c
This commit refactors how TLSP deletion callbacks are stored and called:
- TLSP deletion callbacks are now stored in "pvThreadLocalStoragePointers"
directly. configNUM_THREAD_LOCAL_STORAGE_POINTERS is doubled in size so that
the deletion callbacks are stored in the latter half of the array
- The callbacks are now called via "portCLEAN_UP_TCB()". As such, the
prvDeleteTLS() additions are no longer needed and the function can be removed
- Removed some legacy TLSP tests using the old method of storing the callback
pointers.
This commit reduces the source code diff between IDF FreeRTOS and upstream
vanilla FreeRTOS, in preparation for v10.5.1 upgrade.
portCLEAN_UP_COPROC() was an IDF specific addition to FreeRTOS, where the
macro was called from prvDeleteTCB() to clean up the coprocessor context of a
deleted task.
This commit removes portCLEAN_UP_COPROC(). The coprocessor cleanup routine
(i.e., vPortCleanUpCoprocArea()) is now called via portCLEAN_UP_TCB()->
vPortTCBPreDeleteHook().
This removes a minor code difference between IDF FreeRTOS and upstream.
Previously, if CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP was enabled, users
would provide a definition for a vPortCleanUpTCB() hook function that is called
right before a task's memory is freed in prvDeleteTCB(). However,
vPortCleanUpTCB() will be reclaimed by ESP-IDF for internal use in v6.0.
This commit introduces the following changes...
Introduced a new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option:
- Provides the same pre-deletion hook functionality. But users now define
vTaskPreDeletionHook() instead.
- CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP still exists, but is marked as
deprecated. This is to maintain compatibility with existing applications
that already define vPortCleanUpTCB().
- Removed redundant --wl --wrap workaround with vPortCleanUpTCB()
- Added todo notes to remove support for user defined vPortCleanUpTCB()
completely in v6.0.
- Updated test cases to use new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option
Freed up portCLEAN_UP_TCB() to call a new internal vPortTCBPreDeleteHook():
- vPortTCBPreDeleteHook() now replaces the previous "wrapped" implementation
of vPortCleanUpTCB().
- vPortTCBPreDeleteHook() is an internal task pre-delete hook for IDF FreeRTOS
ports to inject some pre-deletion operations.
- Internal pre-delete hook now invokes user provided vTaskPreDeletionHook()
if enabled.
- Relocated vPortTCBPreDeleteHook() to correct section in port.c
This commit optimizes xTaskRemoveFromEventList() by removing the
listLIST_IS_EMPTY() check from single core builds. The scenario of the event
list being empty when the function is called can only occur on multi-core
builds.
This commit fixes and optimizes vTaskRemoveFromUnorderedEventList() in the
following ways:
- Fixed bug in single core builds where the unblocked task would be placed on
xPendingReadyList.
- If an ISR occurs while accessing xPendingReadyList, and the ISR also
accesses the xPendingReadyList, xPendingReadyList would be corrupted.
- In single core builds, this function is only called from event groups with
the scheduler suspended. Thus the function should have exclusive access to
pxReadyTasksLists instead of xPendingReadyList.
- The function's single core logic has now been updated to match upstream
behavior, by always placing the unblocked task on pxReadyTasksLists.
- Optimized the function for single core builds by removing the
taskCAN_BE_SCHEDULED() check.
- In single core builds, given that the function is always called with the
scheduler suspended
- Thus, the taskCAN_BE_SCHEDULED (and the subsequent routine to place the
unblocked task on the xPendingReadyList) is not necessary for single core
builds.
- The function now matches upstream behavior in single core builds.
Closes https://github.com/espressif/esp-idf/issues/11883
portBASE_TYPE is an internal macro defined by the porting layer. This commit
changes all references to BaseType_t which is the official type exposed by
FreeRTOS.
portSTACK_TYPE is an internal macro defined by the porting layer. This commit
changes all references to StackType_t which is the official type exposed by
FreeRTOS.
- add hardware stack guard based on assist-debug module
- enable hardware stack guard by default
- disable hardware stack guard for freertos ci.release test
- refactor rtos_int_enter/rtos_int_exit to change SP register inside them
- fix panic_reason.h header for RISC-V
- update docs to include information about the new feature
freertos: Updated vTaskRemoveFromUnorderedEventList() to consider scheduler state before adding task to ready list
Closes IDF-5785
See merge request espressif/esp-idf!23482
vTaskRemoveFromUnorderedEventList() runs under the assumption that the
scheduler is suspended during the call. However, for IDF FreeRTOS, this
is not true. When dual-core system is active, this API call is made in
a critical section but without suspending the scheduler. This commit
updates the vTaskRemoveFromUnorderedEventList() function to now consider
the scheduler state on either cores before adding a task to the ready list.
This commit fixes a bug in xTaskRemoveFromEvenetList() where in the
check for scheduler suspension did not account for nested suspensions.
Additionally, this commit updates all checks for scheduler
suspension to follow a uniform way.
* Added a POSIX/Linux simulator that is compatible with the Amazon
FreeRTOS SMP API. Note that the simulator itself is still
single core, like the IDF FreeRTOS POSIX/Linux simulator.
When porting an RTOS to the Xtensa architecture, there are a few files that
are common to all Xtensa RTOS ports. These files form the Xtensa RTOS porting
layer (e.g., "xtensa_vectors.S", "xtensa_context.S"). An Xtensa RTOS port is
expected to provide an RTOS specific "xtensa_rtos.h" header to interface with
the Xtensa RTOS porting layer.
Previously, the Xtensa RTOS porting layer files were placed in the FreeRTOS
component. This commit does the following:
1. Moves the Xtensa RTOS porting layer files from the `freertos` component to
the `xtensa` component. The following files were moved:
- xtensa_asm_utils.h
- xtensa_context.S
- xtensa_loadstore_handler.S
- xtensa_vectors.S
2. Refactored xtensa component include paths to separate Xtensa RTOS porting
layer headers.
- Xtensa HAL headers included via `#include <xtensa/...h>`
- Xtensa RTOS porting layer headers included via `#include <...h>`
Note: The xtensa files in the Amazon SMP FreeRTOS port are not moved/deleted in
this commit to ensure the moved files retain a clean diff history.
This commit merges the "FreeRTOSConfig_smp.h" file into the "FreeRTOSConfig.h".
The configurations for all FreeRTOS implementations are now stored in a single
file.
FromISR APIs would put an unblocked task on the pending ready list if
the scheduler is suspended on the current core, irrespective of the
task's core affinity and the state of the scheduler on the other core.
This commit updates this behavior by allowing tasks to get scheduled on
a core which has the scheduler running as long as the task's core
affinity allows it.
The default implementation of some xtensa vectors were previously moved to
"xtensa_vector_defaults.S" as weak functions so that they could be overriden.
This commit moves these default vectors back into "xtensa_vectors.S" in
preparation for further refactoring of the xtensa component.
This commit adds a common macro for the differing configASSERT() calls that
check if the scheduler is suspended outside a critical section. This macro
allows vanilla behavior to be restored for single core builds. Also added
comments explaining why xTaskGetSchedulerState() is called instead when
building for SMP.
Vanilla FreeRTOS expects applications to use one of the heap implementations
provided by FreeRTOS (i.e., heap_x.c), where functions such as pvPortMalloc()
and vPortFree() are defined in the heap implementation.
However, ESP-IDF already provides its own heap implementation
(i.e., esp_heap_caps.h). Thus, the pvPortMallc()/vPortFree() functions were
previously overriden by macro to call esp_heap functions directly.
This commit refactors the FreeRTOS port's heap as such:
- Added a heap_idf.c that implements all of the heap related functions required
by FreeRTOS source
- All dynamic memory allocated by FreeRTOS is from internal memory. Thus, the
FreeRTOS heap is the internal memory subset of the ESP-IDF heap.
- Removed some old macros to reduce diff from upstream source code.
Previously, IDF FreeRTOS would restrict the clean up of task memory (done by
vTaskDelete() or the Idle task) to only tasks pinned to the current core or
unpinned tasks. This was due to the need to clear the task's coprocessor
ownership on the other core (i.e., "_xt_coproc_owner_sa"). But this restriction
can be lifted by simply protecting access of "_xt_coproc_owner_sa" with a
spinlock.
This commit implements a "_xt_coproc_owner_sa_lock" to protect the access of
"_xt_coproc_owner_sa", thus vTaskDelete() and prvDeleteTCB() can now delete
tasks pinned to the other core so long as that task is not currently running.
Note: This fix was copied from the Xtensa port of Amazon SMP FreeRTOS
This commit removes the dependency on portUSING_MPU_WRAPPERS on the Xtensa port
of IDF FreeRTOS. This dependency was added due to a hack implemented in the
upstream port that required the usage of the "xMPUSettings" member of the TCB.
The "xMPUSettings" would be used as a pointer to the task's coprocessor save
area on the stack, even though FreeRTOS MPU support was not available.
The hack has now been removed, and the CPSA pointer is now calculated using
a combination of constant offsets values and the pxEndOfStack member of the
TCB.
Note: This impelemtation was copied from the Xtensa port of Amazon SMP FreeRTOS.
This commit refactors port_common.c so that it only contains implementation of
FreeRTOS port functions that are common to all FreeRTOS ports (i.e., on all
architectures and on all FreeRTOS implementations).
This commit refactors the OS startup functions as follows:
- Moved the OS/app startup functions listed below to "app_startup.c". Their
implementations are now common to all ports (RISC-V and Xtensa) of all
FreeRTOS implementations (IDF and Amazon SMP).
- esp_startup_start_app()
- esp_startup_start_app_other_cores()
- Removed esp_startup_start_app_common() as app startup functions are now
already common to all ports.
- Added extra logs to "main_task" to help with user debugging
Note: Increased startup delay on "unity_task". The "unity_run_menu()" is non
blocking, thus if the main task or other startup tasks have not been freed
by the time "unity_run_menu()" is run, those tasks will be freed the next time
"unity_task" blocks. This could cause some tests to have a memory leak, thus
the "unity_task" startup delay has increased.
FreeRTOS(IDF): Restore vanilla task selection algorithm if building for single core with optimized selection is disabled
See merge request espressif/esp-idf!21001
This commit restores the vanilla behavior for taskSELECT_HIGHEST_PRIORITY_TASK
when configNUM_CORES == 1 && configUSE_PORT_OPTIMISED_TASK_SELECTION == 0. This
results in the SMP selection algorithm (taskSelectHighestPriorityTaskSMP) to
only be run when configNUM_CORES > 1.
This commit adds preprocessing time checks to ensure that
- configNUM_CORES is defined to 1 or 2
- Incompatible configurations are not set depending on configNUM_CORES
