| .. |
|
include/soc
|
fix(console): enable to select UART1 port for console output
|
2023-11-09 22:32:49 +08:00 |
|
ld
|
feat(gptimer): use RCC atomic block to enable/reset peripheral
|
2023-08-22 17:05:35 +08:00 |
|
adc_periph.c
|
adc: update adc header files on c3
|
2021-03-26 12:04:46 +08:00 |
|
dedic_gpio_periph.c
|
fast_gpio: driver support on esp32c3
|
2021-09-06 19:39:09 +08:00 |
|
gdma_periph.c
|
gdma: support IRAM interrupt
|
2021-11-08 16:14:51 +08:00 |
|
gpio_periph.c
|
gpio: Fix ESP32S3 GPIO48 does not support hold function bug
|
2022-07-15 16:51:25 +08:00 |
|
i2c_periph.c
|
soc: Add initial ESP32-C3 support
|
2020-11-30 11:12:56 +11:00 |
|
i2s_periph.c
|
feat(i2s): supported getting the tx sync count and specify interrupt flags
|
2023-09-28 15:03:27 +08:00 |
|
interrupts.c
|
apptrace: Adds ESP32-C3 support
|
2021-06-24 13:16:14 +03:00 |
|
ledc_periph.c
|
soc: Add initial ESP32-C3 support
|
2020-11-30 11:12:56 +11:00 |
|
mpi_periph.c
|
bignum: refactored the hardware abstraction of the mpi peripheral
|
2023-04-24 16:15:11 +05:30 |
|
rmt_periph.c
|
rmt: document and improve LL driver
|
2022-03-09 10:58:12 +08:00 |
|
sdm_periph.c
|
sdm: clean up soc/hal/ll code
|
2022-07-20 14:59:50 +08:00 |
|
spi_periph.c
|
spi_master:fix error when use spi_bus_add_device more than 3 device
|
2022-09-05 12:10:22 +08:00 |
|
temperature_sensor_periph.c
|
temperature_sensor: Add temperature sensor support for ESP32-C2
|
2022-06-23 15:36:43 +08:00 |
|
timer_periph.c
|
gptimer: clean up hal and ll for driver-ng
|
2021-10-20 18:40:08 +08:00 |
|
twai_periph.c
|
twai: describe peripheral info
|
2022-11-04 17:40:29 +08:00 |
|
uart_periph.c
|
uart: uart_set_pin function will now use IOMUX whenever possible
|
2021-08-04 12:48:30 +08:00 |
46d33e46ef