| .. |
|
include/soc
|
1.add ldo parameters in efuse table; 2.set ldo based on pvt-efuse; 3.ldo voltage is changed based on cpu freq
|
2022-09-29 03:16:49 +08:00 |
|
ld
|
esp32s2, esp32s3: update copyright notice
|
2021-08-05 15:01:26 +02:00 |
|
adc_periph.c
|
adc: fix adc1 channel 8 and 9 not defined bug on s3
|
2021-12-14 20:10:47 +08:00 |
|
CMakeLists.txt
|
usb: Add usb_phy driver to support operations on USB PHY
|
2021-09-13 12:39:56 +08:00 |
|
dedic_gpio_periph.c
|
dedic_gpio: support on esp32s3
|
2021-06-30 18:10:54 +08:00 |
|
gdma_periph.c
|
gdma: separate tx/rx channel interrupt
|
2021-05-06 15:06:37 +08:00 |
|
gpio_periph.c
|
gpio: Fix ESP32S3 GPIO48 does not support hold function bug
|
2022-09-05 03:47:43 +00:00 |
|
i2c_periph.c
|
Whitespace: Automated whitespace fixes (large commit)
|
2020-11-11 07:36:35 +00:00 |
|
i2s_periph.c
|
driver/i2s: refactor for i2s driver layer
|
2021-09-02 14:33:36 +08:00 |
|
interrupts.c
|
esp32s3: fix interrupt names used by SystemView
|
2022-08-19 14:42:45 +02:00 |
|
lcd_periph.c
|
lcd: unify callback prototype
|
2021-10-02 14:23:31 +08:00 |
|
ledc_periph.c
|
Whitespace: Automated whitespace fixes (large commit)
|
2020-11-11 07:36:35 +00:00 |
|
mcpwm_periph.c
|
mcpwm: update hal and soc naming
|
2021-07-26 22:32:45 +08:00 |
|
pcnt_periph.c
|
pcnt: update pcnt soc data for all targets
|
2021-08-10 17:19:21 +08:00 |
|
rmt_periph.c
|
rmt: restructure rmt_signal_conn_t
|
2021-06-22 15:29:11 +08:00 |
|
rtc_io_periph.c
|
gpio:support gpio in/out/interrupt for esp32s3(728)
|
2021-06-28 11:44:14 +08:00 |
|
sdio_slave_periph.c
|
soc: descriptive part occupy whole component
|
2020-10-28 07:21:29 +08:00 |
|
sdmmc_periph.c
|
soc: add esp32s3 sdmmc support
|
2021-05-10 23:21:27 +02:00 |
|
sigmadelta_periph.c
|
sigma_delta: add periph signal list and support esp32-s3
|
2020-10-29 11:06:28 +08:00 |
|
spi_periph.c
|
spi_master:support octal mode for esp32s2 and esp32s3
|
2021-08-19 16:40:22 +08:00 |
|
timer_periph.c
|
timergroup: move interrupt index into peripheral description file
|
2020-11-03 18:16:50 +08:00 |
|
touch_sensor_periph.c
|
touch sensor: update copyright notice
|
2021-10-08 11:45:57 +08:00 |
|
uart_periph.c
|
uart: uart_set_pin function will now use IOMUX whenever possible
|
2021-08-04 12:48:30 +08:00 |
|
usb_periph.c
|
soc/hal: add tinyusb support esp32s3
|
2021-05-06 16:20:54 +08:00 |
|
usb_periph.h
|
Support ESP32S3 Beta 3 target
|
2021-03-18 10:24:22 +08:00 |
|
usb_phy_periph.c
|
usb: Add usb_phy driver to support operations on USB PHY
|
2021-09-13 12:39:56 +08:00 |
