Song Ruo Jing 46d33e46ef fix(console): enable to select UART1 port for console output ...

This feature was only enabled for esp32, esp32s2, esp32s3 previously.
Now, enabling this feature for all targets.

2023-11-09 22:32:49 +08:00

..

include/soc

fix(console): enable to select UART1 port for console output

2023-11-09 22:32:49 +08:00

ld

feat(gptimer): use RCC atomic block to enable/reset peripheral

2023-08-22 17:05:35 +08:00

adc_periph.c

adc: update adc header files on c3

2021-03-26 12:04:46 +08:00

dedic_gpio_periph.c

fast_gpio: driver support on esp32c3

2021-09-06 19:39:09 +08:00

gdma_periph.c

gdma: support IRAM interrupt

2021-11-08 16:14:51 +08:00

gpio_periph.c

gpio: Fix ESP32S3 GPIO48 does not support hold function bug

2022-07-15 16:51:25 +08:00

i2c_periph.c

soc: Add initial ESP32-C3 support

2020-11-30 11:12:56 +11:00

i2s_periph.c

feat(i2s): supported getting the tx sync count and specify interrupt flags

2023-09-28 15:03:27 +08:00

interrupts.c

apptrace: Adds ESP32-C3 support

2021-06-24 13:16:14 +03:00

ledc_periph.c

soc: Add initial ESP32-C3 support

2020-11-30 11:12:56 +11:00

mpi_periph.c

bignum: refactored the hardware abstraction of the mpi peripheral

2023-04-24 16:15:11 +05:30

rmt_periph.c

rmt: document and improve LL driver

2022-03-09 10:58:12 +08:00

sdm_periph.c

sdm: clean up soc/hal/ll code

2022-07-20 14:59:50 +08:00

spi_periph.c

spi_master:fix error when use spi_bus_add_device more than 3 device

2022-09-05 12:10:22 +08:00

temperature_sensor_periph.c

temperature_sensor: Add temperature sensor support for ESP32-C2

2022-06-23 15:36:43 +08:00

timer_periph.c

gptimer: clean up hal and ll for driver-ng

2021-10-20 18:40:08 +08:00

twai_periph.c

twai: describe peripheral info

2022-11-04 17:40:29 +08:00

uart_periph.c

uart: uart_set_pin function will now use IOMUX whenever possible

2021-08-04 12:48:30 +08:00