Marius Vikhammer c192ea478e fix(wdt): changed ESP32-C3 WDT to use XTAL as clock ... This clock is unchanged even when CPU/APB frequency changes (e.g. due to esp_pm), which means timeout period is correct even after such a change.		2023-09-13 10:45:49 +08:00
..
adc_channel.h	adc: make adc_channel.h macros work with ng driver	2023-01-09 14:25:24 +08:00
apb_saradc_reg.h	esp32c2: Add support for RNG	2022-06-02 11:36:23 +08:00
apb_saradc_struct.h	temperature_sensor: Add temperature sensor support for ESP32-C2	2022-06-23 15:36:43 +08:00
assist_debug_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
bb_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
boot_mode.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
clk_tree_defs.h	ledc: Add support for esp32h2; Refactor ledc driver clock source selection related code	2023-01-30 19:19:34 +08:00
clkout_channel.h	gpio: Add support for esp32c6	2022-10-18 12:38:36 +08:00
dport_access.h	dport: Move DPORT workaround to G0	2022-05-31 13:44:18 +08:00
dport_reg.h	dport: Move DPORT workaround to G0	2022-05-31 13:44:18 +08:00
ecc_mult_reg.h	esp32c2/hal: Added ECC HAL layer	2022-03-08 14:05:23 +00:00
efuse_defs.h	efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3	2023-04-04 22:32:32 +08:00
efuse_reg.h	efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3	2023-04-04 22:32:32 +08:00
efuse_struct.h	efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3	2023-04-04 22:32:32 +08:00
ext_mem_defs.h	g0: resolve MMU_PAGE_SIZE not defined in g0 build issue	2023-02-22 12:37:40 +08:00
extmem_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
fe_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
gdma_channel.h	gdma: correct the dma trigger of uart	2023-01-10 16:37:01 +08:00
gdma_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
gdma_struct.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
gpio_pins.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
gpio_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
gpio_sig_map.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
gpio_struct.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
hwcrypto_reg.h	hal(ecp32c2): Adds spi_flash_encrypted_ll	2022-05-31 11:12:21 +00:00
i2c_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
i2c_struct.h	i2c: support esp32h2	2022-02-23 15:19:37 +08:00
interrupt_core0_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
interrupt_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
io_mux_reg.h	gpio: support glitch filter	2022-12-09 11:33:42 +08:00
Kconfig.soc_caps.in	fix(wdt): changed ESP32-C3 WDT to use XTAL as clock	2023-09-13 10:45:49 +08:00
ledc_reg.h	ledc: Provide support for esp32c2 and esp32h2	2022-04-14 08:15:14 +00:00
ledc_struct.h	ledc: Provide support for esp32c2 and esp32h2	2022-04-14 08:15:14 +00:00
mmu.h	soc: remove unused MMU related macros	2022-05-20 16:46:28 +08:00
modem_clkrst_reg.h	Fix soc caps for BT	2022-06-03 21:45:40 +08:00
nrx_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
periph_defs.h	temperature_sensor: Add temperature sensor support for ESP32-C2	2022-06-23 15:36:43 +08:00
reg_base.h	soc: remove unused DR_REG_DPORT_END macro for c2/c3/s2/s3	2022-09-22 11:45:20 +08:00
regi2c_bbpll.h	Refactor: move regi2c_*.h header files from esp_hw_support to soc component	2022-06-30 09:40:44 +00:00
regi2c_bias.h	Refactor: move regi2c_*.h header files from esp_hw_support to soc component	2022-06-30 09:40:44 +00:00
regi2c_brownout.h	G0: RISC-V targets have now an independent G0 layer	2022-06-14 15:00:53 +08:00
regi2c_defs.h	1.add ldo parameters in efuse table; 2.set ldo dbias based on pvt-efuse; 3.add pll cali stop function; 4. add efuse_ocode	2022-08-05 14:24:51 +08:00
regi2c_dig_reg.h	Refactor: move regi2c_*.h header files from esp_hw_support to soc component	2022-06-30 09:40:44 +00:00
regi2c_lp_bias.h	Refactor: move regi2c_*.h header files from esp_hw_support to soc component	2022-06-30 09:40:44 +00:00
regi2c_saradc.h	G0: RISC-V targets have now an independent G0 layer	2022-06-14 15:00:53 +08:00
reset_reasons.h	esp_system: support esp32c2 reset reason	2022-02-15 13:50:22 +08:00
rtc_cntl_reg.h	bootloader: enable super WDT and BOD reset on C2	2023-04-24 11:32:23 +08:00
rtc_cntl_struct.h	soc: fix register header files not self-contain	2022-07-29 11:18:06 +08:00
rtc.h	fix chip broken bug when run in monitor mode of S2 and modify voltage param to fit all sleep mode of S2/C2/C3	2023-04-24 10:37:57 +08:00
sensitive_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
sensitive_struct.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
soc_caps.h	fix(wdt): changed ESP32-C3 WDT to use XTAL as clock	2023-09-13 10:45:49 +08:00
soc_pins.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
soc.h	Revert "fix(esp_pm): Constrains the minimum frequency of APB_MAX when the modem is working"	2023-07-25 13:51:37 +08:00
spi_mem_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
spi_mem_struct.h	C/Cxx: unify static assertions with the macro ESP_STATIC_ASSERT	2022-11-21 16:18:08 +08:00
spi_pins.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
spi_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
spi_struct.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
syscon_reg.h	Fix soc caps for BT	2022-06-03 21:45:40 +08:00
syscon_struct.h	soc: fix register header files not self-contain	2022-07-29 11:18:06 +08:00
system_reg.h	esp32c6: clean up existing soc files and header file inclusion in IDF to be compatible with the new chip	2022-09-01 12:28:06 +08:00
system_struct.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
systimer_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
systimer_struct.h	systimer: refactor hal to accomodate more xtal choices	2022-07-25 16:08:52 +08:00
timer_group_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
timer_group_struct.h	WDT: implement interrupt wdt and task wdt for ESP32-C2	2022-09-15 14:37:59 +08:00
uart_channel.h	uart: Provide support for esp32c2 and esp32h2	2022-03-02 11:29:13 +08:00
uart_pins.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
uart_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00
uart_struct.h	driver: fix public header exceptions for driver	2022-07-22 00:12:36 +00:00
wdev_reg.h	esp8684: rename target to esp32c2	2022-01-19 11:08:57 +08:00