| .. |
|
adc_ll.h
|
fix(adc): fixed esp32, esp32s2,esp32s3 adc oneshot mode clk div issue
|
2023-07-12 17:10:58 +08:00 |
|
aes_ll.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
brownout_ll.h
|
brownout: Disable the hardware BOD when BOD interrupt is enabled
|
2023-07-11 14:32:40 +08:00 |
|
cache_ll.h
|
cache: refactor cache_utils into cache_hal instade
|
2023-07-31 14:52:03 +08:00 |
|
clk_gate_ll.h
|
esp_wifi: add protection for mac reset
|
2022-10-31 06:41:42 +00:00 |
|
clk_tree_ll.h
|
hal: always inline clk_tree_ll functions
|
2023-02-22 05:33:03 +00:00 |
|
dedic_gpio_cpu_ll.h
|
gpio: add test with -O0
|
2022-08-02 23:07:06 +08:00 |
|
ecc_ll.h
|
esp32c2/ecc: Remove support for inverse multiplication
|
2023-03-13 16:39:46 +05:30 |
|
efuse_hal.h
|
efuse(es32c2): Supports 26MHz XTAL
|
2022-08-24 09:10:57 +00:00 |
|
efuse_ll.h
|
hal: Explicit setting of efuse time settings
|
2023-05-12 21:42:38 +08:00 |
|
gdma_ll.h
|
gdma: support override default channel priority
|
2023-04-06 10:49:32 +08:00 |
|
gpio_ll.h
|
spi_slave: fix spi_slave_isr iram_safe and add test case for it
|
2023-01-04 15:35:04 +08:00 |
|
gpspi_flash_ll.h
|
spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2
|
2022-04-26 15:22:37 +08:00 |
|
i2c_ll.h
|
Merge branch 'refactor/driver_ut_to_test_app_v5.1' into 'release/v5.1'
|
2023-05-18 16:18:26 +08:00 |
|
ledc_ll.h
|
ledc: Fix two bugs inside LEDC driver
|
2023-04-06 12:37:33 +08:00 |
|
memprot_ll.h
|
cache/mmu: implememnt cache and mmu hal APIs in bootloader
|
2022-03-11 22:43:11 +08:00 |
|
mmu_ll.h
|
mmu: mmu_hal_check_valid_ext_vaddr_region
|
2023-02-17 13:04:55 +08:00 |
|
mpu_ll.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
mwdt_ll.h
|
wdt: add support for H2
|
2023-02-23 11:22:51 +08:00 |
|
regi2c_ctrl_ll.h
|
1.add ldo parameters in efuse table; 2.set ldo dbias based on pvt-efuse; 3.add pll cali stop function; 4. add efuse_ocode
|
2022-08-05 14:24:51 +08:00 |
|
rtc_cntl_ll.h
|
hal: add rtc_cntl LL function for wake stub
|
2023-01-10 16:09:49 +08:00 |
|
rwdt_ll.h
|
wdt: refactor wdt codes to use unified type
|
2023-02-15 12:08:55 +08:00 |
|
sar_ctrl_ll.h
|
rtc: add pwdet and sar adc power related low level func
|
2023-01-09 17:09:01 +08:00 |
|
sha_ll.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
spi_flash_encrypted_ll.h
|
hal(ecp32c2): Adds spi_flash_encrypted_ll
|
2022-05-31 11:12:21 +00:00 |
|
spi_flash_ll.h
|
spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2
|
2022-04-26 15:22:37 +08:00 |
|
spi_ll.h
|
spi: added transaction length check to refuse longer than hardware supported length
|
2023-05-17 09:03:26 +00:00 |
|
spimem_flash_ll.h
|
spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2
|
2022-04-26 15:22:37 +08:00 |
|
systimer_ll.h
|
systimer: assign counter and alarm in esp_hw_support
|
2023-01-10 17:05:49 +08:00 |
|
temperature_sensor_ll.h
|
temperature_sensor: Apply new-shared interface in temperature sensor driver
|
2023-07-10 11:16:09 +08:00 |
|
timer_ll.h
|
gptimer: bringup driver on esp32c6
|
2022-09-13 10:50:58 +08:00 |
|
uart_ll.h
|
uart: add low level func for uart to set err wr mask
|
2023-03-09 10:28:33 +08:00 |
