Darian Leung e9c617fa19 refactor(soc): SOC_USB_PERIPH_NUM option ... This commit refactors SOC_USB_PERIPH_NUM as follows: - Renamed to SOC_USB_OTG_PERIPH_NUM to avoid confusion with USB Serial JTAG - Updated to unsigned integer "1U" - Updated some build rules to depend on SOC_USB_OTG_SUPPORTED instead		2023-12-05 16:44:46 +01:00
..
include/soc	refactor(soc): SOC_USB_PERIPH_NUM option	2023-12-05 16:44:46 +01:00
ld	feat(gptimer): use RCC atomic block to enable/reset peripheral	2023-08-22 17:05:35 +08:00
adc_periph.c	adc: fix adc1 channel 8 and 9 not defined bug on s3	2021-12-08 18:21:28 +08:00
dedic_gpio_periph.c	dedic_gpio: support on esp32s3	2021-06-30 18:10:54 +08:00
gdma_periph.c	gdma: support IRAM interrupt	2021-11-08 16:14:51 +08:00
gpio_periph.c	gpio: Fix ESP32S3 GPIO48 does not support hold function bug	2022-07-15 16:51:25 +08:00
i2c_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
i2s_periph.c	feat(i2s): supported getting the tx sync count and specify interrupt flags	2023-09-28 15:03:27 +08:00
interrupts.c	fix(interrupts): reorder esp32s3 irq names to align with the respective irq numbers	2023-10-12 13:24:24 +02:00
lcd_periph.c	lcd: unify callback prototype	2021-10-02 14:23:31 +08:00
ledc_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
mcpwm_periph.c	mcpwm: clean up hal driver and add doc	2022-06-02 15:01:18 +08:00
mpi_periph.c	bignum: refactored the hardware abstraction of the mpi peripheral	2023-04-24 16:15:11 +05:30
pcnt_periph.c	pulse_cnt: new driver for PCNT peripheral	2022-03-03 22:38:32 +08:00
rmt_periph.c	rmt: document and improve LL driver	2022-03-09 10:58:12 +08:00
rtc_io_periph.c	feat(lp_io): Add support for ESP32P4	2023-09-20 19:39:41 +08:00
sdm_periph.c	sdm: clean up soc/hal/ll code	2022-07-20 14:59:50 +08:00
sdmmc_periph.c	feat(sdmmc): supported sd2.0 on esp32p4	2023-10-18 11:57:55 +00:00
spi_periph.c	spi_master:fix error when use spi_bus_add_device more than 3 device	2022-09-05 12:10:22 +08:00
temperature_sensor_periph.c	temperature_sensor: Add temperature sensor support for ESP32-C2	2022-06-23 15:36:43 +08:00
timer_periph.c	gptimer: clean up hal and ll for driver-ng	2021-10-20 18:40:08 +08:00
touch_sensor_periph.c	soc: added SOC_TOUCH_SENSE_SUPPORTED macro	2022-07-22 00:12:36 +00:00
twai_periph.c	twai: describe peripheral info	2022-11-04 17:40:29 +08:00
uart_periph.c	uart: uart_set_pin function will now use IOMUX whenever possible	2021-08-04 12:48:30 +08:00
usb_otg_periph.c	usb: Allow settings of all signals in usb_phy	2022-10-18 09:18:29 +02:00
usb_periph.c	soc/hal: add tinyusb support esp32s3	2021-05-06 16:20:54 +08:00