Song Ruo Jing 5276cd4f1d refactor(uart): add support to be able to test LP_UART port ... Increase LP_UART_EMPTY_THRESH_DEFAULT value to 4. The original value could cause the FIFO become empty before filling next data into the FIFO when the buadrate is high. TX_DONE interrupt would raise before actual transmission complete in such case.		2024-02-07 14:37:48 +08:00
..
include/soc	refactor(uart): add support to be able to test LP_UART port	2024-02-07 14:37:48 +08:00
ld	fix(spi): Correct REG_SPI_BASE(i) macro for all targets	2023-11-17 02:39:28 +00:00
adc_periph.c	adc: update adc header files on c3	2021-03-26 12:04:46 +08:00
dedic_gpio_periph.c	fast_gpio: driver support on esp32c3	2021-09-06 19:39:09 +08:00
gdma_periph.c	gdma: support IRAM interrupt	2021-11-08 16:14:51 +08:00
gpio_periph.c	gpio: Fix ESP32S3 GPIO48 does not support hold function bug	2022-07-15 16:51:25 +08:00
i2c_periph.c	soc: Add initial ESP32-C3 support	2020-11-30 11:12:56 +11:00
i2s_periph.c	feat(i2s): supported getting the tx sync count and specify interrupt flags	2023-09-28 15:03:27 +08:00
interrupts.c	apptrace: Adds ESP32-C3 support	2021-06-24 13:16:14 +03:00
ledc_periph.c	soc: Add initial ESP32-C3 support	2020-11-30 11:12:56 +11:00
mpi_periph.c	bignum: refactored the hardware abstraction of the mpi peripheral	2023-04-24 16:15:11 +05:30
rmt_periph.c	rmt: document and improve LL driver	2022-03-09 10:58:12 +08:00
sdm_periph.c	sdm: clean up soc/hal/ll code	2022-07-20 14:59:50 +08:00
spi_periph.c	fix(spi): correct some signals and dummy bits docs	2023-11-17 02:39:28 +00:00
temperature_sensor_periph.c	temperature_sensor: Add temperature sensor support for ESP32-C2	2022-06-23 15:36:43 +08:00
timer_periph.c	gptimer: clean up hal and ll for driver-ng	2021-10-20 18:40:08 +08:00
twai_periph.c	twai: describe peripheral info	2022-11-04 17:40:29 +08:00
uart_periph.c	uart: uart_set_pin function will now use IOMUX whenever possible	2021-08-04 12:48:30 +08:00