Song Ruo Jing c55a07bf57 refactor(uart): add support to be able to test LP_UART port ... Increase LP_UART_EMPTY_THRESH_DEFAULT value to 4. The original value could cause the FIFO become empty before filling next data into the FIFO when the buadrate is high. TX_DONE interrupt would raise before actual transmission complete in such case.		2024-04-15 19:39:30 +08:00
..
include/soc	refactor(uart): add support to be able to test LP_UART port	2024-04-15 19:39:30 +08:00
ld	usb_host: Rename struct/ll/hal symbols to use "usb_dwc" prefix	2022-09-16 16:45:26 +08:00
adc_periph.c	soc: descriptive part occupy whole component	2020-10-28 07:21:29 +08:00
dac_periph.c	dac: optimize the dma stratege	2022-10-25 17:14:59 +08:00
dedic_gpio_periph.c	soc: descriptive part occupy whole component	2020-10-28 07:21:29 +08:00
gpio_periph.c	gpio: Fix ESP32S3 GPIO48 does not support hold function bug	2022-07-15 16:51:25 +08:00
i2c_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
i2s_periph.c	feat(i2s): supported external clock source input	2023-08-14 03:25:12 +00:00
interrupts.c	replace CAN with TWAI in the esp_isr_names table	2022-08-11 11:23:03 +02:00
lcd_periph.c	lcd: unify callback prototype	2021-10-02 14:23:31 +08:00
ledc_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
mpi_periph.c	bignum: refactored the hardware abstraction of the mpi peripheral	2023-04-24 16:15:11 +05:30
pcnt_periph.c	pulse_cnt: new driver for PCNT peripheral	2022-03-03 22:38:32 +08:00
rmt_periph.c	rmt: document and improve LL driver	2022-03-09 10:58:12 +08:00
rtc_io_periph.c	feat(lp_io): Add support for ESP32P4	2023-09-20 19:39:41 +08:00
sdm_periph.c	sdm: clean up soc/hal/ll code	2022-07-20 14:59:50 +08:00
spi_periph.c	spi_master:fix error when use spi_bus_add_device more than 3 device	2022-09-05 12:10:22 +08:00
temperature_sensor_periph.c	temperature_sensor: Add temperature sensor support for ESP32-C2	2022-06-23 15:36:43 +08:00
timer_periph.c	gptimer: clean up hal and ll for driver-ng	2021-10-20 18:40:08 +08:00
touch_sensor_periph.c	soc: added SOC_TOUCH_SENSE_SUPPORTED macro	2022-07-22 00:12:36 +00:00
twai_periph.c	twai: describe peripheral info	2022-11-04 17:40:29 +08:00
uart_periph.c	uart: uart_set_pin function will now use IOMUX whenever possible	2021-08-04 12:48:30 +08:00
usb_dwc_periph.c	refactor(soc): Rename usb_otg_periph to usb_dwc_periph	2024-02-19 15:45:04 +08:00
usb_periph.c	refactor(soc): Deprecate usb pin mappings	2024-02-19 15:45:03 +08:00