mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
refactor(uart): add support to be able to test LP_UART port
Increase LP_UART_EMPTY_THRESH_DEFAULT value to 4. The original value could cause the FIFO become empty before filling next data into the FIFO when the buadrate is high. TX_DONE interrupt would raise before actual transmission complete in such case.
This commit is contained in:
Song Ruo Jing
parent
408a16b21a
commit
c55a07bf57
@ -2,6 +2,6 @@
|
||||
# the component can be registered as WHOLE_ARCHIVE
|
||||
idf_component_register(
|
||||
SRCS "test_app_main.c" "test_uart.c"
|
||||
REQUIRES driver unity
|
||||
REQUIRES driver unity test_utils
|
||||
WHOLE_ARCHIVE
|
||||
)
|
||||
|
||||
@ -1,29 +1,61 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
#include <string.h>
|
||||
#include <sys/param.h>
|
||||
#include "unity.h"
|
||||
#include "driver/uart.h" // for the uart driver access
|
||||
#include "test_utils.h"
|
||||
#include "driver/uart.h"
|
||||
#include "esp_log.h"
|
||||
#include "esp_system.h" // for uint32_t esp_random()
|
||||
#include "esp_rom_gpio.h"
|
||||
#include "driver/lp_io.h"
|
||||
#include "soc/uart_periph.h"
|
||||
#include "soc/uart_pins.h"
|
||||
#include "soc/soc_caps.h"
|
||||
#include "soc/clk_tree_defs.h"
|
||||
|
||||
#define UART_TAG "Uart"
|
||||
#define UART_NUM1 (UART_NUM_1)
|
||||
#define BUF_SIZE (100)
|
||||
#define UART1_RX_PIN (5)
|
||||
#define UART1_TX_PIN (4)
|
||||
#define UART_BAUD_11520 (11520)
|
||||
#define UART_BAUD_115200 (115200)
|
||||
#define TOLERANCE (0.02) //baud rate error tolerance 2%.
|
||||
|
||||
#define UART1_CTS_PIN (13)
|
||||
typedef struct {
|
||||
uart_port_t port_num;
|
||||
soc_module_clk_t default_src_clk;
|
||||
int tx_pin_num;
|
||||
int rx_pin_num;
|
||||
uint32_t rx_flow_ctrl_thresh;
|
||||
} uart_port_param_t;
|
||||
|
||||
static void uart_config(uint32_t baud_rate, uart_sclk_t source_clk)
|
||||
static bool port_select(uart_port_param_t *port_param)
|
||||
{
|
||||
char argv[10];
|
||||
unity_wait_for_signal_param("select to test 'uart' or 'lp_uart' port", argv, sizeof(argv));
|
||||
|
||||
if (strcmp(argv, "uart") == 0) {
|
||||
port_param->port_num = UART_NUM_1; // Test HP_UART with UART1 port
|
||||
port_param->default_src_clk = UART_SCLK_DEFAULT;
|
||||
port_param->tx_pin_num = 4;
|
||||
port_param->rx_pin_num = 5;
|
||||
port_param->rx_flow_ctrl_thresh = 120;
|
||||
return true;
|
||||
#if SOC_UART_LP_NUM > 0
|
||||
} else if (strcmp(argv, "lp_uart") == 0) {
|
||||
port_param->port_num = LP_UART_NUM_0;
|
||||
port_param->default_src_clk = LP_UART_SCLK_DEFAULT;
|
||||
port_param->tx_pin_num = LP_U0TXD_GPIO_NUM;
|
||||
port_param->rx_pin_num = LP_U0RXD_GPIO_NUM;
|
||||
port_param->rx_flow_ctrl_thresh = 12;
|
||||
return true;
|
||||
#endif
|
||||
} else {
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
static void uart_config(uart_port_t uart_num, uint32_t baud_rate, uart_sclk_t source_clk)
|
||||
{
|
||||
uart_config_t uart_config = {
|
||||
.baud_rate = baud_rate,
|
||||
@ -34,49 +66,63 @@ static void uart_config(uint32_t baud_rate, uart_sclk_t source_clk)
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
||||
};
|
||||
|
||||
uart_driver_install(UART_NUM1, BUF_SIZE * 2, BUF_SIZE * 2, 20, NULL, 0);
|
||||
uart_param_config(UART_NUM1, &uart_config);
|
||||
TEST_ESP_OK(uart_set_loop_back(UART_NUM1, true));
|
||||
TEST_ESP_OK(uart_driver_install(uart_num, BUF_SIZE * 2, BUF_SIZE * 2, 20, NULL, 0));
|
||||
TEST_ESP_OK(uart_param_config(uart_num, &uart_config));
|
||||
TEST_ESP_OK(uart_set_loop_back(uart_num, true));
|
||||
}
|
||||
|
||||
static volatile bool exit_flag, case_end;
|
||||
|
||||
typedef struct {
|
||||
uart_port_t port_num;
|
||||
SemaphoreHandle_t exit_sem;
|
||||
} uart_task1_param_t;
|
||||
|
||||
static void test_task1(void *pvParameters)
|
||||
{
|
||||
SemaphoreHandle_t *sema = (SemaphoreHandle_t *) pvParameters;
|
||||
uart_task1_param_t *param = (uart_task1_param_t *)pvParameters;
|
||||
char* data = (char *) malloc(256);
|
||||
|
||||
while (exit_flag == false) {
|
||||
uart_tx_chars(UART_NUM1, data, 256);
|
||||
uart_tx_chars(param->port_num, data, 256);
|
||||
// The uart_wait_tx_done() function does not block anything if ticks_to_wait = 0.
|
||||
uart_wait_tx_done(UART_NUM1, 0);
|
||||
uart_wait_tx_done(param->port_num, 0);
|
||||
}
|
||||
|
||||
free(data);
|
||||
xSemaphoreGive(*sema);
|
||||
xSemaphoreGive(param->exit_sem);
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
static void test_task2(void *pvParameters)
|
||||
{
|
||||
uart_port_t uart_num = (uart_port_t)pvParameters;
|
||||
while (exit_flag == false) {
|
||||
// This task obstruct a setting tx_done_sem semaphore in the UART interrupt.
|
||||
// It leads to waiting the ticks_to_wait time in uart_wait_tx_done() function.
|
||||
uart_disable_tx_intr(UART_NUM1);
|
||||
uart_disable_tx_intr(uart_num);
|
||||
}
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
static void test_task3(void *pvParameters)
|
||||
{
|
||||
uart_config(UART_BAUD_11520, UART_SCLK_DEFAULT);
|
||||
uart_port_param_t port_param = {};
|
||||
TEST_ASSERT(port_select(&port_param));
|
||||
|
||||
uart_port_t uart_num = port_param.port_num;
|
||||
uart_config(uart_num, UART_BAUD_11520, port_param.default_src_clk);
|
||||
|
||||
SemaphoreHandle_t exit_sema = xSemaphoreCreateBinary();
|
||||
uart_task1_param_t task1_param = {
|
||||
.port_num = uart_num,
|
||||
.exit_sem = exit_sema,
|
||||
};
|
||||
exit_flag = false;
|
||||
case_end = false;
|
||||
|
||||
xTaskCreate(test_task1, "tsk1", 2048, &exit_sema, 5, NULL);
|
||||
xTaskCreate(test_task2, "tsk2", 2048, NULL, 5, NULL);
|
||||
xTaskCreate(test_task1, "tsk1", 2048, (void *)&task1_param, 5, NULL);
|
||||
xTaskCreate(test_task2, "tsk2", 2048, (void *)uart_num, 5, NULL);
|
||||
|
||||
printf("Waiting for 5 sec\n");
|
||||
vTaskDelay(pdMS_TO_TICKS(5000));
|
||||
@ -87,7 +133,7 @@ static void test_task3(void *pvParameters)
|
||||
} else {
|
||||
TEST_FAIL_MESSAGE("uart_wait_tx_done is blocked");
|
||||
}
|
||||
TEST_ESP_OK(uart_driver_delete(UART_NUM1));
|
||||
TEST_ESP_OK(uart_driver_delete(uart_num));
|
||||
|
||||
vTaskDelay(2); // wait for test_task1 to exit
|
||||
|
||||
@ -104,41 +150,70 @@ TEST_CASE("test uart_wait_tx_done is not blocked when ticks_to_wait=0", "[uart]"
|
||||
|
||||
TEST_CASE("test uart get baud-rate", "[uart]")
|
||||
{
|
||||
#if SOC_UART_SUPPORT_REF_TICK
|
||||
uint32_t baud_rate1 = 0;
|
||||
printf("init uart%d, use reftick, baud rate : %d\n", (int)UART_NUM1, (int)UART_BAUD_11520);
|
||||
uart_config(UART_BAUD_11520, UART_SCLK_REF_TICK);
|
||||
uart_get_baudrate(UART_NUM1, &baud_rate1);
|
||||
printf("get baud rate when use reftick: %d\n", (int)baud_rate1);
|
||||
TEST_ASSERT_UINT32_WITHIN(UART_BAUD_11520 * TOLERANCE, UART_BAUD_11520, baud_rate1);
|
||||
#endif
|
||||
uint32_t baud_rate2 = 0;
|
||||
printf("init uart%d, unuse reftick, baud rate : %d\n", (int)UART_NUM1, (int)UART_BAUD_115200);
|
||||
uart_config(UART_BAUD_115200, UART_SCLK_DEFAULT);
|
||||
uart_get_baudrate(UART_NUM1, &baud_rate2);
|
||||
printf("get baud rate when don't use reftick: %d\n", (int)baud_rate2);
|
||||
TEST_ASSERT_UINT32_WITHIN(UART_BAUD_115200 * TOLERANCE, UART_BAUD_115200, baud_rate2);
|
||||
uart_port_param_t port_param = {};
|
||||
TEST_ASSERT(port_select(&port_param));
|
||||
|
||||
uart_driver_delete(UART_NUM1);
|
||||
ESP_LOGI(UART_TAG, "get baud-rate test passed ....");
|
||||
uart_port_t uart_num = port_param.port_num;
|
||||
soc_module_clk_t uart_clk_srcs[] = SOC_UART_CLKS;
|
||||
uint32_t uart_clk_srcs_num = sizeof(uart_clk_srcs) / sizeof(uart_clk_srcs[0]);
|
||||
|
||||
soc_module_clk_t *clk_srcs = uart_clk_srcs;
|
||||
uint32_t clk_srcs_num = uart_clk_srcs_num;
|
||||
|
||||
#if SOC_UART_LP_NUM > 0
|
||||
soc_module_clk_t lp_uart_clk_srcs[] = SOC_LP_UART_CLKS;
|
||||
uint32_t lp_uart_clk_srcs_num = sizeof(lp_uart_clk_srcs) / sizeof(lp_uart_clk_srcs[0]);
|
||||
|
||||
if (uart_num >= SOC_UART_HP_NUM) {
|
||||
clk_srcs = lp_uart_clk_srcs;
|
||||
clk_srcs_num = lp_uart_clk_srcs_num;
|
||||
}
|
||||
#endif
|
||||
|
||||
uart_config(uart_num, UART_BAUD_115200, port_param.default_src_clk);
|
||||
|
||||
const uint32_t test_baudrate_vals[] = {UART_BAUD_11520, UART_BAUD_115200};
|
||||
for (size_t i = 0; i < sizeof(test_baudrate_vals) / sizeof(test_baudrate_vals[0]); i++) {
|
||||
for (size_t j = 0; j < clk_srcs_num; j++) {
|
||||
uart_config_t uart_config = {
|
||||
.baud_rate = test_baudrate_vals[i],
|
||||
.source_clk = clk_srcs[j],
|
||||
.data_bits = UART_DATA_8_BITS,
|
||||
.parity = UART_PARITY_DISABLE,
|
||||
.stop_bits = UART_STOP_BITS_1,
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
||||
};
|
||||
TEST_ESP_OK(uart_param_config(uart_num, &uart_config));
|
||||
|
||||
uint32_t actual_baudrate = 0;
|
||||
uart_get_baudrate(uart_num, &actual_baudrate);
|
||||
TEST_ASSERT_UINT32_WITHIN(test_baudrate_vals[i] * TOLERANCE, test_baudrate_vals[i], actual_baudrate);
|
||||
}
|
||||
}
|
||||
|
||||
uart_driver_delete(uart_num);
|
||||
}
|
||||
|
||||
TEST_CASE("test uart tx data with break", "[uart]")
|
||||
{
|
||||
uart_port_param_t port_param = {};
|
||||
TEST_ASSERT(port_select(&port_param));
|
||||
|
||||
uart_port_t uart_num = port_param.port_num;
|
||||
const int buf_len = 200;
|
||||
const int send_len = 128;
|
||||
const int brk_len = 10;
|
||||
char *psend = (char *)malloc(buf_len);
|
||||
TEST_ASSERT_NOT_NULL(psend);
|
||||
memset(psend, '0', buf_len);
|
||||
uart_config(UART_BAUD_115200, UART_SCLK_DEFAULT);
|
||||
printf("Uart%d send %d bytes with break\n", UART_NUM1, send_len);
|
||||
uart_write_bytes_with_break(UART_NUM1, (const char *)psend, send_len, brk_len);
|
||||
uart_wait_tx_done(UART_NUM1, portMAX_DELAY);
|
||||
uart_config(uart_num, UART_BAUD_115200, port_param.default_src_clk);
|
||||
printf("Uart%d send %d bytes with break\n", uart_num, send_len);
|
||||
uart_write_bytes_with_break(uart_num, (const char *)psend, send_len, brk_len);
|
||||
uart_wait_tx_done(uart_num, portMAX_DELAY);
|
||||
//If the code is running here, it means the test passed, otherwise it will crash due to the interrupt wdt timeout.
|
||||
printf("Send data with break test passed\n");
|
||||
free(psend);
|
||||
uart_driver_delete(UART_NUM1);
|
||||
uart_driver_delete(uart_num);
|
||||
}
|
||||
|
||||
static void uart_word_len_set_get_test(int uart_num)
|
||||
@ -210,14 +285,17 @@ static void uart_wakeup_set_get_test(int uart_num)
|
||||
|
||||
TEST_CASE("uart general API test", "[uart]")
|
||||
{
|
||||
const int uart_num = UART_NUM1;
|
||||
uart_port_param_t port_param = {};
|
||||
TEST_ASSERT(port_select(&port_param));
|
||||
|
||||
uart_port_t uart_num = port_param.port_num;
|
||||
uart_config_t uart_config = {
|
||||
.baud_rate = 115200,
|
||||
.data_bits = UART_DATA_8_BITS,
|
||||
.parity = UART_PARITY_DISABLE,
|
||||
.stop_bits = UART_STOP_BITS_1,
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
||||
.source_clk = UART_SCLK_DEFAULT,
|
||||
.source_clk = port_param.default_src_clk,
|
||||
};
|
||||
uart_param_config(uart_num, &uart_config);
|
||||
uart_word_len_set_get_test(uart_num);
|
||||
@ -229,7 +307,7 @@ TEST_CASE("uart general API test", "[uart]")
|
||||
|
||||
static void uart_write_task(void *param)
|
||||
{
|
||||
int uart_num = (int)param;
|
||||
uart_port_t uart_num = (uart_port_t)param;
|
||||
uint8_t *tx_buf = (uint8_t *)malloc(1024);
|
||||
if(tx_buf == NULL) {
|
||||
TEST_FAIL_MESSAGE("tx buffer malloc fail");
|
||||
@ -241,25 +319,19 @@ static void uart_write_task(void *param)
|
||||
//d[0] and d[1023] are header
|
||||
tx_buf[0] = (i & 0xff);
|
||||
tx_buf[1023] = ((~i) & 0xff);
|
||||
uart_write_bytes(uart_num, (const char*)tx_buf, 1024);
|
||||
uart_write_bytes(uart_num, (const char *)tx_buf, 1024);
|
||||
uart_wait_tx_done(uart_num, portMAX_DELAY);
|
||||
}
|
||||
free(tx_buf);
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
/**
|
||||
* The following tests use loop back
|
||||
*
|
||||
* NOTE: In the following tests, because the internal loopback is enabled, the CTS signal is connected to
|
||||
* the RTS signal internally. However, On ESP32S3, they are not, and the CTS keeps the default level (which
|
||||
* is a high level). So the workaround is to map the CTS in_signal to a GPIO pin (here IO13 is used) and connect
|
||||
* the RTS output_signal to this IO.
|
||||
*/
|
||||
|
||||
TEST_CASE("uart read write test", "[uart]")
|
||||
{
|
||||
const int uart_num = UART_NUM1;
|
||||
uart_port_param_t port_param = {};
|
||||
TEST_ASSERT(port_select(&port_param));
|
||||
|
||||
uart_port_t uart_num = port_param.port_num;
|
||||
uint8_t *rd_data = (uint8_t *)malloc(1024);
|
||||
if(rd_data == NULL) {
|
||||
TEST_FAIL_MESSAGE("rx buffer malloc fail");
|
||||
@ -270,15 +342,13 @@ TEST_CASE("uart read write test", "[uart]")
|
||||
.parity = UART_PARITY_DISABLE,
|
||||
.stop_bits = UART_STOP_BITS_1,
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_CTS_RTS,
|
||||
.source_clk = UART_SCLK_DEFAULT,
|
||||
.rx_flow_ctrl_thresh = 120
|
||||
.source_clk = port_param.default_src_clk,
|
||||
.rx_flow_ctrl_thresh = port_param.rx_flow_ctrl_thresh,
|
||||
};
|
||||
TEST_ESP_OK(uart_driver_install(uart_num, BUF_SIZE * 2, 0, 20, NULL, 0));
|
||||
TEST_ESP_OK(uart_param_config(uart_num, &uart_config));
|
||||
// Use loop back feature to connect TX signal to RX signal, CTS signal to RTS signal internally. Then no need to configure uart pins.
|
||||
TEST_ESP_OK(uart_set_loop_back(uart_num, true));
|
||||
TEST_ESP_OK(uart_set_pin(uart_num, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART1_CTS_PIN));
|
||||
//Connect the RTS out_signal to the CTS pin (which is mapped to CTS in_signal)
|
||||
esp_rom_gpio_connect_out_signal(UART1_CTS_PIN, UART_PERIPH_SIGNAL(uart_num, SOC_UART_RTS_PIN_IDX), 0, 0);
|
||||
|
||||
TEST_ESP_OK(uart_wait_tx_done(uart_num, portMAX_DELAY));
|
||||
vTaskDelay(pdMS_TO_TICKS(20)); // make sure last byte has flushed from TX FIFO
|
||||
@ -322,12 +392,15 @@ TEST_CASE("uart read write test", "[uart]")
|
||||
uart_driver_delete(uart_num);
|
||||
free(rd_data);
|
||||
|
||||
vTaskDelay(pdMS_TO_TICKS(100)); // wait for uart_write_task to exit
|
||||
vTaskDelay(2); // wait for uart_write_task to exit
|
||||
}
|
||||
|
||||
TEST_CASE("uart tx with ringbuffer test", "[uart]")
|
||||
{
|
||||
const int uart_num = UART_NUM1;
|
||||
uart_port_param_t port_param = {};
|
||||
TEST_ASSERT(port_select(&port_param));
|
||||
|
||||
uart_port_t uart_num = port_param.port_num;
|
||||
uint8_t *rd_data = (uint8_t *)malloc(1024);
|
||||
uint8_t *wr_data = (uint8_t *)malloc(1024);
|
||||
if(rd_data == NULL || wr_data == NULL) {
|
||||
@ -339,16 +412,14 @@ TEST_CASE("uart tx with ringbuffer test", "[uart]")
|
||||
.parity = UART_PARITY_DISABLE,
|
||||
.stop_bits = UART_STOP_BITS_1,
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_CTS_RTS,
|
||||
.rx_flow_ctrl_thresh = 120,
|
||||
.source_clk = UART_SCLK_DEFAULT,
|
||||
.rx_flow_ctrl_thresh = port_param.rx_flow_ctrl_thresh,
|
||||
.source_clk = port_param.default_src_clk,
|
||||
};
|
||||
uart_wait_tx_idle_polling(uart_num);
|
||||
TEST_ESP_OK(uart_param_config(uart_num, &uart_config));
|
||||
TEST_ESP_OK(uart_driver_install(uart_num, 1024 * 2, 1024 *2, 20, NULL, 0));
|
||||
TEST_ESP_OK(uart_driver_install(uart_num, 1024 * 2, 1024 * 2, 20, NULL, 0));
|
||||
// Use loop back feature to connect TX signal to RX signal, CTS signal to RTS signal internally. Then no need to configure uart pins.
|
||||
TEST_ESP_OK(uart_set_loop_back(uart_num, true));
|
||||
TEST_ESP_OK(uart_set_pin(uart_num, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART1_CTS_PIN));
|
||||
//Connect the RTS out_signal to the CTS pin (which is mapped to CTS in_signal)
|
||||
esp_rom_gpio_connect_out_signal(UART1_CTS_PIN, UART_PERIPH_SIGNAL(uart_num, SOC_UART_RTS_PIN_IDX), 0, 0);
|
||||
|
||||
for (int i = 0; i < 1024; i++) {
|
||||
wr_data[i] = i;
|
||||
@ -358,7 +429,7 @@ TEST_CASE("uart tx with ringbuffer test", "[uart]")
|
||||
size_t tx_buffer_free_space;
|
||||
uart_get_tx_buffer_free_size(uart_num, &tx_buffer_free_space);
|
||||
TEST_ASSERT_EQUAL_INT(2048, tx_buffer_free_space); // full tx buffer space is free
|
||||
uart_write_bytes(uart_num, (const char*)wr_data, 1024);
|
||||
uart_write_bytes(uart_num, (const char *)wr_data, 1024);
|
||||
uart_get_tx_buffer_free_size(uart_num, &tx_buffer_free_space);
|
||||
TEST_ASSERT_LESS_THAN(2048, tx_buffer_free_space); // tx transmit in progress: tx buffer has content
|
||||
TEST_ASSERT_GREATER_OR_EQUAL(1024, tx_buffer_free_space);
|
||||
@ -374,56 +445,72 @@ TEST_CASE("uart tx with ringbuffer test", "[uart]")
|
||||
|
||||
TEST_CASE("uart int state restored after flush", "[uart]")
|
||||
{
|
||||
/**
|
||||
* The first goal of this test is to make sure that when our RX FIFO is full,
|
||||
* we can continue receiving back data after flushing
|
||||
* For more details, check IDF-4374
|
||||
*/
|
||||
uart_port_param_t port_param = {};
|
||||
TEST_ASSERT(port_select(&port_param));
|
||||
|
||||
uart_port_t uart_num = port_param.port_num;
|
||||
uart_config_t uart_config = {
|
||||
.baud_rate = 115200,
|
||||
.data_bits = UART_DATA_8_BITS,
|
||||
.parity = UART_PARITY_DISABLE,
|
||||
.stop_bits = UART_STOP_BITS_1,
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
||||
.source_clk = UART_SCLK_DEFAULT,
|
||||
.source_clk = port_param.default_src_clk,
|
||||
};
|
||||
|
||||
const uart_port_t uart_echo = UART_NUM_1;
|
||||
const int uart_tx_signal = uart_periph_signal[uart_echo].pins[SOC_UART_TX_PIN_IDX].signal;
|
||||
const int uart_tx = UART1_TX_PIN;
|
||||
const int uart_rx = UART1_RX_PIN;
|
||||
const int uart_tx_signal = uart_periph_signal[uart_num].pins[SOC_UART_TX_PIN_IDX].signal;
|
||||
const int uart_tx = port_param.tx_pin_num;
|
||||
const int uart_rx = port_param.rx_pin_num;
|
||||
const int buf_size = 256;
|
||||
const int intr_alloc_flags = 0;
|
||||
|
||||
TEST_ESP_OK(uart_driver_install(uart_echo, buf_size * 2, 0, 0, NULL, intr_alloc_flags));
|
||||
TEST_ESP_OK(uart_param_config(uart_echo, &uart_config));
|
||||
TEST_ESP_OK(uart_set_pin(uart_echo, uart_tx, uart_rx, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE));
|
||||
TEST_ESP_OK(uart_driver_install(uart_num, buf_size * 2, 0, 0, NULL, intr_alloc_flags));
|
||||
TEST_ESP_OK(uart_param_config(uart_num, &uart_config));
|
||||
TEST_ESP_OK(uart_set_pin(uart_num, uart_tx, uart_rx, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE));
|
||||
|
||||
/* Make sure UART2's RX signal is connected to TX pin
|
||||
/* Make sure UART's TX signal is connected to RX pin
|
||||
* This creates a loop that lets us receive anything we send on the UART */
|
||||
esp_rom_gpio_connect_out_signal(uart_rx, uart_tx_signal, false, false);
|
||||
if (uart_num < SOC_UART_HP_NUM) {
|
||||
esp_rom_gpio_connect_out_signal(uart_rx, uart_tx_signal, false, false);
|
||||
#if SOC_UART_LP_NUM > 0
|
||||
} else {
|
||||
// LP_UART
|
||||
#if SOC_LP_GPIO_MATRIX_SUPPORTED
|
||||
TEST_ESP_OK(lp_gpio_connect_out_signal(uart_rx, uart_tx_signal, false, false));
|
||||
#else
|
||||
// The only way is to use loop back feature
|
||||
TEST_ESP_OK(uart_set_loop_back(uart_num, true));
|
||||
#endif
|
||||
#endif // SOC_UART_LP_NUM > 0
|
||||
}
|
||||
|
||||
uint8_t *data = (uint8_t *) malloc(buf_size);
|
||||
uint8_t *data = (uint8_t *)malloc(buf_size);
|
||||
TEST_ASSERT_NOT_NULL(data);
|
||||
uart_write_bytes(uart_echo, (const char *) data, buf_size);
|
||||
uart_write_bytes(uart_num, (const char *)data, buf_size);
|
||||
|
||||
/* As we set up a loopback, we can read them back on RX */
|
||||
int len = uart_read_bytes(uart_echo, data, buf_size, pdMS_TO_TICKS(1000));
|
||||
int len = uart_read_bytes(uart_num, data, buf_size, pdMS_TO_TICKS(1000));
|
||||
printf("len is %d\n", len);
|
||||
TEST_ASSERT_EQUAL(len, buf_size);
|
||||
|
||||
/**
|
||||
* The first goal of this test is to make sure that when our RX FIFO is full,
|
||||
* we can continue receiving back data after flushing
|
||||
* For more details, check IDF-4374 */
|
||||
|
||||
/* Fill the RX buffer, this should disable the RX interrupts */
|
||||
int written = uart_write_bytes(uart_echo, (const char *) data, buf_size);
|
||||
int written = uart_write_bytes(uart_num, (const char *)data, buf_size);
|
||||
TEST_ASSERT_NOT_EQUAL(-1, written);
|
||||
written = uart_write_bytes(uart_echo, (const char *) data, buf_size);
|
||||
written = uart_write_bytes(uart_num, (const char *)data, buf_size);
|
||||
TEST_ASSERT_NOT_EQUAL(-1, written);
|
||||
written = uart_write_bytes(uart_echo, (const char *) data, buf_size);
|
||||
written = uart_write_bytes(uart_num, (const char *)data, buf_size);
|
||||
TEST_ASSERT_NOT_EQUAL(-1, written);
|
||||
|
||||
/* Flush the input buffer, RX interrupts should be re-enabled */
|
||||
uart_flush_input(uart_echo);
|
||||
written = uart_write_bytes(uart_echo, (const char *) data, buf_size);
|
||||
uart_flush_input(uart_num);
|
||||
written = uart_write_bytes(uart_num, (const char *)data, buf_size);
|
||||
TEST_ASSERT_NOT_EQUAL(-1, written);
|
||||
len = uart_read_bytes(uart_echo, data, buf_size, pdMS_TO_TICKS(1000));
|
||||
len = uart_read_bytes(uart_num, data, buf_size, pdMS_TO_TICKS(1000));
|
||||
/* len equals buf_size bytes if interrupts were indeed re-enabled */
|
||||
TEST_ASSERT_EQUAL(len, buf_size);
|
||||
|
||||
@ -433,14 +520,15 @@ TEST_CASE("uart int state restored after flush", "[uart]")
|
||||
* To do so, start by cleaning the RX FIFO, disable the RX interrupts,
|
||||
* flush again, send data to the UART and check that we haven't received
|
||||
* any of the bytes */
|
||||
uart_flush_input(uart_echo);
|
||||
uart_disable_rx_intr(uart_echo);
|
||||
uart_flush_input(uart_echo);
|
||||
written = uart_write_bytes(uart_echo, (const char *) data, buf_size);
|
||||
|
||||
uart_flush_input(uart_num);
|
||||
uart_disable_rx_intr(uart_num);
|
||||
uart_flush_input(uart_num);
|
||||
written = uart_write_bytes(uart_num, (const char *)data, buf_size);
|
||||
TEST_ASSERT_NOT_EQUAL(-1, written);
|
||||
len = uart_read_bytes(uart_echo, data, buf_size, pdMS_TO_TICKS(250));
|
||||
len = uart_read_bytes(uart_num, data, buf_size, pdMS_TO_TICKS(250));
|
||||
TEST_ASSERT_EQUAL(len, 0);
|
||||
|
||||
TEST_ESP_OK(uart_driver_delete(uart_echo));
|
||||
TEST_ESP_OK(uart_driver_delete(uart_num));
|
||||
free(data);
|
||||
}
|
||||
|
||||
@ -1,8 +1,17 @@
|
||||
# SPDX-FileCopyrightText: 2021-2023 Espressif Systems (Shanghai) CO LTD
|
||||
# SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
|
||||
# SPDX-License-Identifier: CC0-1.0
|
||||
|
||||
import pytest
|
||||
|
||||
input_argv = {
|
||||
'esp32': ['uart'],
|
||||
'esp32s2': ['uart'],
|
||||
'esp32s3': ['uart'],
|
||||
'esp32c3': ['uart'],
|
||||
'esp32c2': ['uart'],
|
||||
'esp32c6': ['uart', 'lp_uart'],
|
||||
'esp32h2': ['uart'],
|
||||
}
|
||||
|
||||
|
||||
@pytest.mark.supported_targets
|
||||
@pytest.mark.generic
|
||||
@ -15,4 +24,14 @@ import pytest
|
||||
indirect=True,
|
||||
)
|
||||
def test_uart_single_dev(case_tester) -> None: # type: ignore
|
||||
case_tester.run_all_normal_cases(reset=True)
|
||||
dut = case_tester.dut
|
||||
chip_type = dut.app.target
|
||||
for uart_port in input_argv.get(chip_type, []):
|
||||
for case in case_tester.test_menu:
|
||||
dut.serial.hard_reset()
|
||||
dut._get_ready()
|
||||
dut.confirm_write(case.index, expect_str=f'Running {case.name}...')
|
||||
|
||||
dut.expect("select to test 'uart' or 'lp_uart' port", timeout=10)
|
||||
dut.write(f'{uart_port}')
|
||||
dut.expect_unity_test_output()
|
||||
|
||||
@ -1,15 +1,11 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "esp_err.h"
|
||||
#include "esp_intr_alloc.h"
|
||||
#include "soc/soc_caps.h"
|
||||
@ -20,6 +16,10 @@ extern "C" {
|
||||
#include "freertos/ringbuf.h"
|
||||
#include "hal/uart_types.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* @brief When calling `uart_set_pin`, instead of GPIO number, `UART_PIN_NO_CHANGE`
|
||||
* can be provided to keep the currently allocated pin.
|
||||
*/
|
||||
|
||||
@ -48,7 +48,7 @@
|
||||
static const char *UART_TAG = "uart";
|
||||
|
||||
#define UART_EMPTY_THRESH_DEFAULT (10)
|
||||
#define LP_UART_EMPTY_THRESH_DEFAULT (2)
|
||||
#define LP_UART_EMPTY_THRESH_DEFAULT (4)
|
||||
#define UART_FULL_THRESH_DEFAULT (120)
|
||||
#define LP_UART_FULL_THRESH_DEFAULT (10)
|
||||
#define UART_TOUT_THRESH_DEFAULT (10)
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -211,15 +211,18 @@ static inline void lp_uart_ll_reset_register(int hw_id)
|
||||
*/
|
||||
FORCE_INLINE_ATTR bool uart_ll_is_enabled(uint32_t uart_num)
|
||||
{
|
||||
HAL_ASSERT(uart_num < SOC_UART_HP_NUM);
|
||||
uint32_t uart_clk_config_reg = ((uart_num == 0) ? PCR_UART0_CONF_REG :
|
||||
(uart_num == 1) ? PCR_UART1_CONF_REG : 0);
|
||||
uint32_t uart_rst_bit = ((uart_num == 0) ? PCR_UART0_RST_EN :
|
||||
(uart_num == 1) ? PCR_UART1_RST_EN : 0);
|
||||
uint32_t uart_en_bit = ((uart_num == 0) ? PCR_UART0_CLK_EN :
|
||||
(uart_num == 1) ? PCR_UART1_CLK_EN : 0);
|
||||
return REG_GET_BIT(uart_clk_config_reg, uart_rst_bit) == 0 &&
|
||||
REG_GET_BIT(uart_clk_config_reg, uart_en_bit) != 0;
|
||||
switch (uart_num) {
|
||||
case 0:
|
||||
return PCR.uart0_conf.uart0_clk_en && !PCR.uart0_conf.uart0_rst_en;
|
||||
case 1:
|
||||
return PCR.uart1_conf.uart1_clk_en && !PCR.uart1_conf.uart1_rst_en;
|
||||
case 2: // LP_UART
|
||||
return LPPERI.clk_en.lp_uart_ck_en && !LPPERI.reset_en.lp_uart_reset_en;
|
||||
default:
|
||||
// Unknown uart port number
|
||||
HAL_ASSERT(false);
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -100,9 +100,9 @@ FORCE_INLINE_ATTR void lp_uart_ll_get_sclk(uart_dev_t *hw, soc_module_clk_t *sou
|
||||
case 1:
|
||||
*source_clk = (soc_module_clk_t)LP_UART_SCLK_XTAL_D2;
|
||||
break;
|
||||
case 2:
|
||||
*source_clk = (soc_module_clk_t)LP_UART_SCLK_LP_PLL;
|
||||
break;
|
||||
// case 2:
|
||||
// *source_clk = (soc_module_clk_t)LP_UART_SCLK_LP_PLL;
|
||||
// break;
|
||||
}
|
||||
}
|
||||
|
||||
@ -122,9 +122,9 @@ static inline void lp_uart_ll_set_source_clk(uart_dev_t *hw, soc_periph_lp_uart_
|
||||
case LP_UART_SCLK_XTAL_D2:
|
||||
LPPERI.core_clk_sel.lp_uart_clk_sel = 1;
|
||||
break;
|
||||
case LP_UART_SCLK_LP_PLL:
|
||||
LPPERI.core_clk_sel.lp_uart_clk_sel = 2;
|
||||
break;
|
||||
// case LP_UART_SCLK_LP_PLL: // TODO: LP_PLL clock requires extra support
|
||||
// LPPERI.core_clk_sel.lp_uart_clk_sel = 2;
|
||||
// break;
|
||||
default:
|
||||
// Invalid LP_UART clock source
|
||||
HAL_ASSERT(false);
|
||||
@ -202,8 +202,7 @@ static inline void lp_uart_ll_reset_register(int hw_id)
|
||||
*/
|
||||
FORCE_INLINE_ATTR bool uart_ll_is_enabled(uint32_t uart_num)
|
||||
{
|
||||
HAL_ASSERT(uart_num < SOC_UART_HP_NUM);
|
||||
bool uart_rst_en = false;
|
||||
bool uart_rst_en = true;
|
||||
bool uart_apb_en = false;
|
||||
bool uart_sys_en = false;
|
||||
switch (uart_num) {
|
||||
@ -232,7 +231,14 @@ FORCE_INLINE_ATTR bool uart_ll_is_enabled(uint32_t uart_num)
|
||||
uart_apb_en = HP_SYS_CLKRST.soc_clk_ctrl2.reg_uart4_apb_clk_en;
|
||||
uart_sys_en = HP_SYS_CLKRST.soc_clk_ctrl1.reg_uart4_sys_clk_en;
|
||||
break;
|
||||
case 5:
|
||||
uart_rst_en = LPPERI.reset_en.rst_en_lp_uart;
|
||||
uart_apb_en = LPPERI.clk_en.ck_en_lp_uart;
|
||||
uart_sys_en = true;
|
||||
break;
|
||||
default:
|
||||
// Unknown uart port number
|
||||
HAL_ASSERT(false);
|
||||
break;
|
||||
}
|
||||
return (!uart_rst_en && uart_apb_en && uart_sys_en);
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -202,6 +202,11 @@ typedef enum {
|
||||
|
||||
///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of UART
|
||||
*/
|
||||
#define SOC_UART_CLKS {SOC_MOD_CLK_APB, SOC_MOD_CLK_REF_TICK}
|
||||
|
||||
/**
|
||||
* @brief Type of UART clock source, reserved for the legacy UART driver
|
||||
*/
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -175,6 +175,11 @@ typedef enum {
|
||||
|
||||
///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of UART
|
||||
*/
|
||||
#define SOC_UART_CLKS {SOC_MOD_CLK_PLL_F40M, SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}
|
||||
|
||||
/**
|
||||
* @brief Type of UART clock source, reserved for the legacy UART driver
|
||||
*/
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -201,6 +201,11 @@ typedef enum {
|
||||
|
||||
///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of UART
|
||||
*/
|
||||
#define SOC_UART_CLKS {SOC_MOD_CLK_APB, SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}
|
||||
|
||||
/**
|
||||
* @brief Type of UART clock source, reserved for the legacy UART driver
|
||||
*/
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -217,6 +217,11 @@ typedef enum {
|
||||
|
||||
///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of UART
|
||||
*/
|
||||
#define SOC_UART_CLKS {SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}
|
||||
|
||||
/**
|
||||
* @brief Type of UART clock source, reserved for the legacy UART driver
|
||||
*/
|
||||
@ -227,6 +232,11 @@ typedef enum {
|
||||
UART_SCLK_DEFAULT = SOC_MOD_CLK_PLL_F80M, /*!< UART source clock default choice is PLL_F80M */
|
||||
} soc_periph_uart_clk_src_legacy_t;
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of LP_UART
|
||||
*/
|
||||
#define SOC_LP_UART_CLKS {SOC_MOD_CLK_RTC_FAST, SOC_MOD_CLK_XTAL_D2}
|
||||
|
||||
/**
|
||||
* @brief Type of LP_UART clock source
|
||||
*/
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -224,6 +224,11 @@ typedef enum {
|
||||
|
||||
///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of UART
|
||||
*/
|
||||
#define SOC_UART_CLKS {SOC_MOD_CLK_PLL_F48M, SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}
|
||||
|
||||
/**
|
||||
* @brief Type of UART clock source, reserved for the legacy UART driver
|
||||
*/
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -258,6 +258,11 @@ typedef enum {
|
||||
|
||||
///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of UART
|
||||
*/
|
||||
#define SOC_UART_CLKS {SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}
|
||||
|
||||
/**
|
||||
* @brief Type of UART clock source, reserved for the legacy UART driver
|
||||
*/
|
||||
@ -265,26 +270,22 @@ typedef enum {
|
||||
UART_SCLK_PLL_F80M = SOC_MOD_CLK_PLL_F80M, /*!< UART source clock is PLL_F80M */
|
||||
UART_SCLK_RTC = SOC_MOD_CLK_RC_FAST, /*!< UART source clock is RC_FAST */
|
||||
UART_SCLK_XTAL = SOC_MOD_CLK_XTAL, /*!< UART source clock is XTAL */
|
||||
#if SOC_CLK_TREE_SUPPORTED
|
||||
UART_SCLK_DEFAULT = SOC_MOD_CLK_PLL_F80M, /*!< UART source clock default choice is PLL_F80M */
|
||||
#else
|
||||
UART_SCLK_DEFAULT = SOC_MOD_CLK_XTAL, /*!< UART source clock default choice is XTAL for FPGA environment */
|
||||
#endif
|
||||
} soc_periph_uart_clk_src_legacy_t;
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of LP_UART
|
||||
*/
|
||||
#define SOC_LP_UART_CLKS {SOC_MOD_CLK_RTC_FAST, SOC_MOD_CLK_XTAL_D2}
|
||||
|
||||
/**
|
||||
* @brief Type of LP_UART clock source
|
||||
*/
|
||||
typedef enum {
|
||||
LP_UART_SCLK_LP_FAST = SOC_MOD_CLK_RTC_FAST, /*!< LP_UART source clock is LP(RTC)_FAST */
|
||||
LP_UART_SCLK_XTAL_D2 = SOC_MOD_CLK_XTAL_D2, /*!< LP_UART source clock is XTAL_D2 */
|
||||
LP_UART_SCLK_LP_PLL = SOC_MOD_CLK_LP_PLL, /*!< LP_UART source clock is LP_PLL (8M PLL) */
|
||||
#if SOC_CLK_TREE_SUPPORTED
|
||||
LP_UART_SCLK_DEFAULT = SOC_MOD_CLK_RTC_FAST,
|
||||
#else
|
||||
LP_UART_SCLK_DEFAULT = SOC_MOD_CLK_XTAL_D2, /*!< LP_UART source clock default choice is XTAL_D2 */
|
||||
#endif
|
||||
|
||||
// LP_UART_SCLK_LP_PLL = SOC_MOD_CLK_LP_PLL, /*!< LP_UART source clock is LP_PLL (8M PLL) */ TODO: LP_PLL clock requires extra support
|
||||
LP_UART_SCLK_DEFAULT = SOC_MOD_CLK_RTC_FAST, /*!< LP_UART source clock default choice is LP(RTC)_FAST */
|
||||
} soc_periph_lp_uart_clk_src_t;
|
||||
|
||||
//////////////////////////////////////////////////MCPWM/////////////////////////////////////////////////////////////////
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -217,6 +217,11 @@ typedef enum {
|
||||
|
||||
///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of UART
|
||||
*/
|
||||
#define SOC_UART_CLKS {SOC_MOD_CLK_APB, SOC_MOD_CLK_REF_TICK}
|
||||
|
||||
/**
|
||||
* @brief Type of UART clock source, reserved for the legacy UART driver
|
||||
*/
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -219,6 +219,11 @@ typedef enum {
|
||||
|
||||
///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* @brief Array initializer for all supported clock sources of UART
|
||||
*/
|
||||
#define SOC_UART_CLKS {SOC_MOD_CLK_APB, SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}
|
||||
|
||||
/**
|
||||
* @brief Type of UART clock source, reserved for the legacy UART driver
|
||||
*/
|
||||
|
||||
@ -245,6 +245,26 @@ Macros
|
||||
The API also defines several macros. For example, :c:macro:`UART_HW_FIFO_LEN` defines the length of hardware FIFO buffers; :c:macro:`UART_BITRATE_MAX` gives the maximum baud rate supported by the UART controllers, etc.
|
||||
|
||||
|
||||
.. only:: SOC_UART_LP_NUM
|
||||
|
||||
Use LP UART Controller with HP Core
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The UART driver also supports to control the LP UART controller when the chip is in active mode. The configuration steps for the LP UART are no difference with the steps for a normal UART controller, except:
|
||||
|
||||
1. The port number for the LP UART controller is defined by :c:macro:`LP_UART_NUM_0`.
|
||||
2. The available clock sources for the LP UART controller can be found in :cpp:type:`lp_uart_sclk_t`.
|
||||
3. The size of the hardware FIFO for the LP UART controller is much smaller, which is defined in :c:macro:`SOC_LP_UART_FIFO_LEN`.
|
||||
|
||||
.. only:: SOC_LP_GPIO_MATRIX_SUPPORTED
|
||||
|
||||
4. The GPIO pins for the LP UART controller can only be selected from the LP GPIO pins.
|
||||
|
||||
.. only:: not SOC_LP_GPIO_MATRIX_SUPPORTED
|
||||
|
||||
4. The GPIO pins for the LP UART controller are unalterable, because there is no LP GPIO matrix on the target. Please see **{IDF_TARGET_NAME} Technical Reference Manual** > **IO MUX and GPIO Matrix (GPIO, IO MUX)** > **LP IO MUX Functions List** [`PDF <{IDF_TARGET_TRM_EN_URL}#lp-io-mux-func-list>`__] for the specific pin numbers.
|
||||
|
||||
|
||||
.. _uart-api-deleting-driver:
|
||||
|
||||
Deleting a Driver
|
||||
|
||||
@ -245,6 +245,26 @@ API 提供了一种便利的方法来处理本文所讨论的特定中断，即
|
||||
API 还定义了一些宏指令。例如，:c:macro:`UART_HW_FIFO_LEN` 定义了硬件 FIFO 缓冲区的长度，:c:macro:`UART_BITRATE_MAX` 定义了 UART 控制器支持的最大波特率。
|
||||
|
||||
|
||||
.. only:: SOC_UART_LP_NUM
|
||||
|
||||
使用主核驱动 LP UART 控制器
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
UART 驱动程序还适配了在 Active 模式下对 LP UART 控制器的驱动。LP UART 的配置流程和普通 UART 没有本质上的差别，除了有以下几点需要注意：
|
||||
|
||||
1. LP UART 控制器的端口号为 :c:macro:`LP_UART_NUM_0`。
|
||||
2. LP UART 控制器的可选时钟源可以在 :cpp:type:`lp_uart_sclk_t` 中找到。
|
||||
3. LP UART 控制器的硬件 FIFO 大小要远小于普通 UART 控制器的硬件 FIFO 大小，其值为 :c:macro:`SOC_LP_UART_FIFO_LEN`。
|
||||
|
||||
.. only:: SOC_LP_GPIO_MATRIX_SUPPORTED
|
||||
|
||||
4. LP UART 控制器的 GPIO 引脚只能从 LP GPIO 引脚中选择。
|
||||
|
||||
.. only:: not SOC_LP_GPIO_MATRIX_SUPPORTED
|
||||
|
||||
4. 由于该芯片没有 LP GPIO 交换矩阵，LP UART 控制器的 GPIO 引脚不可改变。具体的引脚号请查看 **{IDF_TARGET_NAME} 技术参考手册** > **IO MUX 和 GPIO 交换矩阵 (GPIO, IO MUX)** > **LP IO MUX 管脚功能列表** [`PDF <{IDF_TARGET_TRM_CN_URL}#lp-io-mux-func-list>`__]。
|
||||
|
||||
|
||||
.. _uart-api-deleting-driver:
|
||||
|
||||
删除驱动程序
|
||||
@ -258,7 +278,7 @@ RS485 特定通信模式简介
|
||||
|
||||
.. note::
|
||||
|
||||
下文将使用 ``[UART_REGISTER_NAME].[UART_FIELD_BIT]`` 指代 UART 寄存器字段/位。了解特定模式位的更多信息，请参考 **{IDF_TARGET_NAME} 技术参考手册** > UART 控制器 (UART) > 寄存器摘要 [`PDF <{IDF_TARGET_TRM_EN_URL}#uart-reg-summ>`__]。请搜索寄存器名称导航至寄存器描述，找到相应字段/位。
|
||||
下文将使用 ``[UART_REGISTER_NAME].[UART_FIELD_BIT]`` 指代 UART 寄存器字段/位。了解特定模式位的更多信息，请参考 **{IDF_TARGET_NAME} 技术参考手册** > UART 控制器 (UART) > 寄存器摘要 [`PDF <{IDF_TARGET_TRM_CN_URL}#uart-reg-summ>`__]。请搜索寄存器名称导航至寄存器描述，找到相应字段/位。
|
||||
|
||||
- ``UART_RS485_CONF_REG.UART_RS485_EN``：设置此位将启用 RS485 通信模式支持。
|
||||
- ``UART_RS485_CONF_REG.UART_RS485TX_RX_EN``：设置此位，发送器的输出信号将环回到接收器的输入信号。
|
||||
|
||||
Loading…
Reference in New Issue
Block a user