Song Ruo Jing c55a07bf57 refactor(uart): add support to be able to test LP_UART port ... Increase LP_UART_EMPTY_THRESH_DEFAULT value to 4. The original value could cause the FIFO become empty before filling next data into the FIFO when the buadrate is high. TX_DONE interrupt would raise before actual transmission complete in such case.		2024-04-15 19:39:30 +08:00
..
include/soc	refactor(uart): add support to be able to test LP_UART port	2024-04-15 19:39:30 +08:00
ld	twai: remove deprecated code and add hint	2022-10-22 18:20:07 +08:00
adc_periph.c	soc: descriptive part occupy whole component	2020-10-28 07:21:29 +08:00
dac_periph.c	dac: optimize the dma stratege	2022-10-25 17:14:59 +08:00
dport_access.c	dport: Move DPORT workaround to G0	2022-05-31 13:44:18 +08:00
gpio_periph.c	esp_hw_support/sleep: fix current leakage when hold digital io during deep sleep	2022-10-11 12:11:28 +08:00
i2c_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
i2s_periph.c	feat(i2s): supported external clock source input	2023-08-14 03:25:12 +00:00
interrupts.c	refactor(interrupt):put the interrupts definitions in soc/interrupts.h	2023-07-17 19:31:56 +08:00
lcd_periph.c	lcd: support I2S1 LCD mode on esp32	2022-03-14 13:55:01 +08:00
ledc_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
mcpwm_periph.c	mcpwm: clean up hal driver and add doc	2022-06-02 15:01:18 +08:00
mpi_periph.c	bignum: refactored the hardware abstraction of the mpi peripheral	2023-04-24 16:15:11 +05:30
pcnt_periph.c	fix(soc): soc header files can pass CI check	2023-06-26 23:00:45 +08:00
rmt_periph.c	rmt: document and improve LL driver	2022-03-09 10:58:12 +08:00
rtc_io_periph.c	feat(lp_io): Add support for ESP32P4	2023-09-20 19:39:41 +08:00
sdio_slave_periph.c	sdio: c6 support	2023-01-18 02:34:46 +00:00
sdm_periph.c	sdm: clean up soc/hal/ll code	2022-07-20 14:59:50 +08:00
sdmmc_periph.c	feat(sdmmc): supported sd2.0 on esp32p4	2023-10-18 11:57:55 +00:00
spi_periph.c	soc: descriptive part occupy whole component	2020-10-28 07:21:29 +08:00
timer_periph.c	gptimer: clean up hal and ll for driver-ng	2021-10-20 18:40:08 +08:00
touch_sensor_periph.c	soc: added SOC_TOUCH_SENSE_SUPPORTED macro	2022-07-22 00:12:36 +00:00
twai_periph.c	twai: describe peripheral info	2022-11-04 17:40:29 +08:00
uart_periph.c	uart: uart_set_pin function will now use IOMUX whenever possible	2021-08-04 12:48:30 +08:00