| .. |
|
include/soc
|
fix(esp_hw_support): clear reserved interrupts that are not applicable for each target
|
2024-05-30 12:12:44 +08:00 |
|
ld
|
fix(spi): Correct REG_SPI_BASE(i) macro for all targets
|
2023-12-06 14:44:26 +08:00 |
|
adc_periph.c
|
adc: fix adc1 channel 8 and 9 not defined bug on s3
|
2021-12-08 18:21:28 +08:00 |
|
dedic_gpio_periph.c
|
dedic_gpio: support on esp32s3
|
2021-06-30 18:10:54 +08:00 |
|
gdma_periph.c
|
gdma: support IRAM interrupt
|
2021-11-08 16:14:51 +08:00 |
|
gpio_periph.c
|
gpio: Fix ESP32S3 GPIO48 does not support hold function bug
|
2022-07-15 16:51:25 +08:00 |
|
i2c_periph.c
|
Whitespace: Automated whitespace fixes (large commit)
|
2020-11-11 07:36:35 +00:00 |
|
i2s_periph.c
|
feat(i2s): supported getting the tx sync count and specify interrupt flags
|
2023-09-28 15:03:27 +08:00 |
|
interrupts.c
|
fix(interrupts): reorder esp32s3 irq names to align with the respective irq numbers
|
2023-10-12 13:24:24 +02:00 |
|
lcd_periph.c
|
lcd: unify callback prototype
|
2021-10-02 14:23:31 +08:00 |
|
ledc_periph.c
|
Whitespace: Automated whitespace fixes (large commit)
|
2020-11-11 07:36:35 +00:00 |
|
mcpwm_periph.c
|
mcpwm: clean up hal driver and add doc
|
2022-06-02 15:01:18 +08:00 |
|
mpi_periph.c
|
bignum: refactored the hardware abstraction of the mpi peripheral
|
2023-04-24 16:15:11 +05:30 |
|
pcnt_periph.c
|
pulse_cnt: new driver for PCNT peripheral
|
2022-03-03 22:38:32 +08:00 |
|
rmt_periph.c
|
rmt: document and improve LL driver
|
2022-03-09 10:58:12 +08:00 |
|
rtc_io_periph.c
|
feat(lp_io): Add support for ESP32P4
|
2023-09-20 19:39:41 +08:00 |
|
sdm_periph.c
|
sdm: clean up soc/hal/ll code
|
2022-07-20 14:59:50 +08:00 |
|
sdmmc_periph.c
|
feat(sdmmc): supported sd2.0 on esp32p4
|
2023-10-18 11:57:55 +00:00 |
|
spi_periph.c
|
fix(spi): correct some signals and dummy bits docs
|
2023-12-06 16:05:36 +08:00 |
|
temperature_sensor_periph.c
|
temperature_sensor: Add temperature sensor support for ESP32-C2
|
2022-06-23 15:36:43 +08:00 |
|
timer_periph.c
|
gptimer: clean up hal and ll for driver-ng
|
2021-10-20 18:40:08 +08:00 |
|
touch_sensor_periph.c
|
soc: added SOC_TOUCH_SENSE_SUPPORTED macro
|
2022-07-22 00:12:36 +00:00 |
|
twai_periph.c
|
twai: describe peripheral info
|
2022-11-04 17:40:29 +08:00 |
|
uart_periph.c
|
uart: uart_set_pin function will now use IOMUX whenever possible
|
2021-08-04 12:48:30 +08:00 |
|
usb_dwc_periph.c
|
refactor(soc): Rename usb_otg_periph to usb_dwc_periph
|
2024-02-19 15:45:04 +08:00 |
|
usb_periph.c
|
refactor(soc): Deprecate usb pin mappings
|
2024-02-19 15:45:03 +08:00 |
