Commit Graph

5806 Commits

Author SHA1 Message Date
Angus Gratton
e98ff1beb7 Merge branch 'bugfix/remove_mbedtls_would_block_v32' into 'release/v3.2'
Remove check for would_block in mbedtls (Backport v3.2)

See merge request espressif/esp-idf!6397
2019-10-23 17:00:36 +08:00
Angus Gratton
696a9fa0ba Merge branch 'bugfix/ticks_to_wait_for_uart_and_i2c_v3.2' into 'release/v3.2'
driver: Fix ticks_to_wait for uart and i2c (v3.2)

See merge request espressif/esp-idf!5248
2019-10-22 13:18:00 +08:00
Jiang Jiang Jian
7ed6748534 Merge branch 'test/fix_mesh_test_case_3.2' into 'release/v3.2'
test: fix test case MESH_EST_2403 (backport 3.2)

See merge request espressif/esp-idf!5910
2019-10-21 20:13:36 +08:00
Jiang Jiang Jian
2dc1d1b568 Merge branch 'docs/update_bootloader_chip_revision_print_v3.2' into 'release/v3.2'
bootloader_support: fix logging prints around chip revision (v3.2)

See merge request espressif/esp-idf!6338
2019-10-21 10:48:46 +08:00
Jiang Jiang Jian
a1c1175fa7 Merge branch 'bugfix/add_kconfig_help_for_eth_gpio0_output_mode_v3.2' into 'release/v3.2'
ethernet: add kconfig help for GPIO0 output mode (v3.2)

See merge request espressif/esp-idf!6343
2019-10-21 10:48:44 +08:00
Jiang Jiang Jian
5adc487133 Merge branch 'bugfix/wps_workaround_for_Telstra_AP_v3.2' into 'release/v3.2'
wps: Relax the check on older config methods in case of WPS2.0 (backport v3.2)

See merge request espressif/esp-idf!5922
2019-10-21 10:46:15 +08:00
Jiang Jiang Jian
eea3e63c39 Merge branch 'bugfix/fix_the_for_smartconfig_send_broadcast_to_phone_v3.2' into 'release/v3.2'
fix the bug that ESP32 sends broadcast to phone after smartconfig is done(backport v3.2)

See merge request espressif/esp-idf!6074
2019-10-21 10:45:34 +08:00
Kedar Sovani
700976f709 Remove check for would_block in mbedtls
Basically, in the portability layer, it is checked if the socket is
NON-block, and if not, then even the EAGAIN and EWOULDBLOCK errors are
diverted to a RECV error. This causes a problem for sockets with
receive timeouts set. When such a timeout is set, the condition for
NON_BLOCK isn't met and hence a hard error is returned.

Searching for EAGAIN and EWOULDBLOCK in lwip returns only 3 results
(accept, recvfrom, close) and all of them look to be genuine cases for
EWOULDBLOCK. So removing this check to make receive timeout with TLS
work.
2019-10-18 14:18:34 +05:30
Roland Dobai
5519afe675 Fix memory leak upon failure of esp_vfs_fat_sdmmc_mount()
Closes https://github.com/espressif/esp-idf/issues/4165
2019-10-18 10:28:24 +02:00
Angus Gratton
f819b7da90 Merge branch 'bugfix/reset_periph_modules_v3.2' into 'release/v3.2'
driver: Add a reset before enabling if a module is off (v3.2)

See merge request espressif/esp-idf!6017
2019-10-18 13:34:15 +08:00
Konstantin Kondrashov
db8ddf050f driver: Add uart and i2c UTs to check ticks_to_wait in some functions 2019-10-16 15:18:31 +08:00
Konstantin Kondrashov
e64f3d43ad i2c: Fix ticks_to_wait when 0 or time expired
Closes: https://github.com/espressif/esp-idf/issues/3301

Closes: IDFGH-964
2019-10-16 15:18:31 +08:00
Konstantin Kondrashov
2bd77056bb rmt/driver: Add module reset before enabling 2019-10-16 05:49:26 +00:00
Konstantin Kondrashov
4be011785e pcnt/driver: Add module reset before enabling 2019-10-16 05:49:26 +00:00
Konstantin Kondrashov
5ce96ab227 sdmmc_host/driver: Add module reset before enabling 2019-10-16 05:49:26 +00:00
Konstantin Kondrashov
b8d4a53260 i2s/driver: Add module reset before enabling 2019-10-16 05:49:26 +00:00
Konstantin Kondrashov
fc31437236 can/driver: Add module reset before enabling 2019-10-16 05:49:26 +00:00
Konstantin Kondrashov
dc63c2e9cb uart/driver: Add module reset before enabling
This commit prevents infinite restarts caused due to an interrupt flag
was left uncleared.

Closes: https://github.com/espressif/esp-idf/issues/1981

Closes: IDF-188
2019-10-16 05:49:26 +00:00
Mahavir Jain
d3d4787335 bootloader_support: fix logging prints around chip revision 2019-10-15 10:35:23 +05:30
chenjianqiang
ae39c659d0 esp32: cpu_start: read binary image header via cache
When flash encryption is enabled, reading via cache also decrypts the
data, whereas spi_flash_read does not.
2019-10-15 12:08:04 +08:00
chenjianqiang
3349c99882 bugfix(flash): add flash config in app startup
We fixed some flash bugs in bootloader, but for the users used the old
vrsion bootloader, they can not fix these bugs via OTA, the solution is
add these updates in app startup.

These updates include:
1. SPI flash gpio matrix and drive strength configuration
2. SPI flash clock configuration
3. SPI flash read dummy configuration
4. SPI flash cs timing configuration
5. Update flash id of g_rom_flashchip
2019-10-15 12:08:04 +08:00
Jiang Jiang Jian
093214c86f Merge branch 'feature/add_psram_workaround_option_3.2' into 'release/v3.2'
make psram workaround depend on chip revison (v3.2)

See merge request espressif/esp-idf!6304
2019-10-14 21:45:34 +08:00
Angus Gratton
f55cb56380 Merge branch 'feature/handle_icy_uris_v32' into 'release/v3.2'
Modified http_parser to handle ICY uris (Backport v3.2)

See merge request espressif/esp-idf!6326
2019-10-14 18:56:01 +08:00
Angus Gratton
f612a39127 Merge branch 'bugfix/freertos_xTaskNotifyGive_v3.2' into 'release/v3.2'
freertos: remove semicolon in xTaskNotifyGive (v3.2)

See merge request espressif/esp-idf!6271
2019-10-14 11:20:41 +08:00
suda-morris
ae2cec834e ethernet: add kconfig help for GPIO0 output mode
1. add kconfig help for GPIO0 output mode
2. fix a bug when select gpio0 output mode and initialize psram
3. make default config to official development board
4. fix wrong LAN8720 register index
2019-10-14 10:50:49 +08:00
Vikram Dattu
31c720602d Modified http_parser to handle ICY uris.
ICY URIs e.g `http://uk1.internet-radio.com/proxy/vombat?mp=/;` need to
be handled differently.

For basic use case, these URIs are similar to HTTP with exception that they reply with `ICY 200` etc in place of `HTTP/1.1 200`.

In http_parser, we now also parse ICY URIs to be able to handle these similar to HTTP.

Signed-off-by: Vikram Dattu <vikram.dattu@espressif.com>
2019-10-11 16:24:31 +05:30
Jiang Jiang Jian
0b4faeb781 Merge branch 'bugfix/btdm_backports_v3.2_0903' into 'release/v3.2'
Bugfix/btdm backports v3.2 0903

See merge request espressif/esp-idf!5987
2019-10-11 18:34:31 +08:00
suda-morris
ef796860d7 bootloader: shrink bin size
1. write a bootloader version of "getting chip revision" function.
2. reduce wordy log.
2019-10-10 12:08:34 +08:00
suda-morris
9742acc33d make psram workaround depend on chip revison
Since ESP32 revision 3, the PSRAM workaround is not needed.
2019-10-10 11:55:16 +08:00
Prasad Alatkar
cf26a8b0f0 BT/Bluedroid : Add support to set min encryption key requirement (Backport v3.2)
- Backport(v3.2) of IDF MR!6122
- Modifies `smp_utils.c` to add check on encryption key size received from
  peer.
- Modifies `esp_ble_gap_set_security_param` API to add minimum encryption key
  size requirement.
2019-10-09 16:19:48 +08:00
Angus Gratton
14098b4832 Merge branch 'fix/add_parentheses_to_spi_swap_data_tx_3.2' into 'release/v3.2'
spi: Put argument of macro SPI_SWAP_DATA_TX/RX in parentheses (backport v3.2)

See merge request espressif/esp-idf!6110
2019-10-09 12:51:55 +08:00
suda-morris
5088758640 freertos: remove semicolon in xTaskNotifyGive 2019-10-08 12:39:28 +08:00
baohongde
ca824d0ddf components/bt: backports release/v3.2 0903
Remove xtensa/xruntime.h
Fix sending Lmp_feature_req_ext in a loop
Fix 2 bugs in r_ld_fm_sket_isr
fix data loss and send same pkt twice sometimes
fix adv data error in air sometimes
fix adv start/stop crash sometimes
2019-09-23 17:53:29 +08:00
suda-morris
eb4c8d9991 support esp32 eco revision 2 and 3 2019-09-19 17:05:08 +08:00
Martin Thierer
d56892b563 spi: Put argument of macro SPI_SWAP_DATA_TX/RX in parentheses
Close https://github.com/espressif/esp-idf/pull/3996
2019-09-16 17:40:40 +08:00
Angus Gratton
b1ee664367 Merge branch 'bugfix/bootloader_factory_reset_with_wake_up_from_deep_sleep_v3.2' into 'release/v3.2'
bootloader: Blocking the Factory reset during wake up from deep sleep (v3.2)

See merge request espressif/esp-idf!6024
2019-09-16 15:11:38 +08:00
Angus Gratton
ee5604cad0 Merge branch 'bugfix/dis_interrupts_up_to_6_level_for_dport_wa_v3.2' into 'release/v3.2'
esp32: Dis interrupts up to 5 lvl for DPORT (v3.2)

See merge request espressif/esp-idf!5714
2019-09-16 15:11:33 +08:00
Angus Gratton
88d8e93223 Merge branch 'update/cjson_v1_7_12_v3.2' into 'release/v3.2'
Update cJSON to v1.7.12 (v3.2)

See merge request espressif/esp-idf!5852
2019-09-16 08:20:59 +08:00
KonstantinKondrashov
2b22f3e853 app_update: Fix UTs for FACTORY_RESET and APP_TEST 2019-09-12 22:07:05 +08:00
KonstantinKondrashov
70954c0b3e bootloader: Factory reset not for deep sleep
Closes: https://github.com/espressif/esp-idf/issues/3800

Closes: IDFGH-1536
2019-09-12 22:07:05 +08:00
Konstantin Kondrashov
69be477885 esp32: Add UTs for DPORT and Hi-interrupt 2019-09-12 13:47:48 +00:00
Konstantin Kondrashov
76f97f3abd esp32: Dis interrupts up to 5 lvl for DPORT
Disable interrupts for both DPORT workarounds up to 5 lvl.

Closes: https://esp32.com/viewtopic.php?f=2&t=10981&sid=d125cec233070ed4d2c5410bf5d3d74a
Closes: IDF-728
2019-09-12 13:47:48 +00:00
chenyudong
d0bfde2ceb test: fix test case MESH_EST_2403 2019-09-12 02:51:06 +00:00
zhangyanjiao
b937de7df2 fix the bug that ESP32 sends broadcast to phone after smartconfig is done 2019-09-11 11:50:58 +08:00
Chinmay
fa952e5d30 esp_http_server : Bugfix in parsing of empty header values
This MR is intended to fix incorrect parsing of HTTP requests when empty header values are present.

The issue is was due to asymmetric behavior of `http_parser` library, which in case of:
* non-empty header values : invokes callbacks with the pointer to the start of a value
* empty header values : invokes callbacks with pointer to the start of next header or section

Since HTTP server relies on this pointer (along with length of the value) to locate the end of a value, and replace the line terminators (CRLFs) with null characters, the second case needed to be handled correctly.

Closes IDFGH-1539

Closes https://github.com/espressif/esp-idf/issues/3803

Backports !5663
2019-09-09 08:57:29 +00:00
Jiang Jiang Jian
ca1e5e5bc5 Merge branch 'bugfix/fix_the_bug_for_WPA_WPA2_PSK_connection_fail_v3.2' into 'release/v3.2'
fix the bug for WPA_WPA2_PSK connection fail(backport v3.2)

See merge request espressif/esp-idf!6007
2019-09-06 11:44:09 +08:00
zhangyanjiao
23b3d97099 1. fix the bug that STA fails to connect WPA_WPA2_PSK Apple AP
2. fix the bug for softAP set authmode
2019-09-05 20:08:52 +08:00
Angus Gratton
0a0f5a3bdc Merge branch 'bugfix/flash_encryption_disable_plaintext_v3.2' into 'release/v3.2'
flash encryption: Add config option to disable any plaintext reflashes (v3.2)

See merge request espressif/esp-idf!5998
2019-09-05 17:26:04 +08:00
Angus Gratton
ec331b3979 flash encryption: Add config option to disable any plaintext reflashes
Enabled by default when Secure Boot is on, so Flash Encryption protection
is always available in case of a Secure Boot bypass.
2019-09-05 18:54:29 +10:00
Angus Gratton
73e040e584 Merge branch 'test/use_correct_config_for_nvs_compatible_case_v3.2' into 'release/v3.2'
test: fix nvs compatible case error (backport v3.2)

See merge request espressif/esp-idf!5893
2019-09-05 16:51:30 +08:00