Some files that should have their copyrights checked are still placed on the
copyright ignore list.
- These entries have been tidied up
- Copyrights of those files have been updated.
This header has been removed for the following reasons:
- Header is misplaced. 'xxx_types.h' headers should be placed in the 'hal'
component.
- The 'usb_xxx_endpoint_t' should be placed in the 'xxx_struct.h' header.
usb_pins.h and usb_periph.h/c lists mappings of USB DWC signals to GPIOs used
to connect to external FSLS PHYs. However, those signals can be routed to any
GPIOs via the GPIO matrix. Thus, these mapping are meaningless and have been
deprecated.
fix(esp_wifi): Fix issue of station disconnecting immediately after scanning
Closes WIFIBUG-132 and IDFCI-1847
See merge request espressif/esp-idf!25915
fix(heap): fix the issue on esp32c3 where retention memory was exhausted prematurely and preventing the CPU from powering down
Closes IDF-8236
See merge request espressif/esp-idf!25962
bugfix(nvs_flash) : fixed nvs_set functions behaviour when called sequentially with same key and different data type(s)
Closes IDFGH-9727
See merge request espressif/esp-idf!25581
1. move startup_stack attr from soc_memory_type_desc_t to soc_memory_region_t and
remove unused aliased_iram field
2. all of the last level of RAM is retention dma accessible on esp32c3
3. remove esp32c2 and later chips retention dma accessible memory caps
4. allow allocate memory from RTC_RAM with MALLOC_CAP_EXEC cap
If LCP keepalive mechanism is enabled in menuconfig, it's statically
configured on creation of an interface and cannot be changed runtime. In
some cases it's useful to relax LCP criteria during runtime operation,
for example before initiating OTA. This config option allows for
disabling already enabled LCP echo (this setting becomes effective after
reconnecting, i.e. initializing a new session)
Closes https://github.com/espressif/esp-protocols/issues/287
Merges https://github.com/espressif/esp-idf/pull/12093
fix(ll): remove FLAG_ATTR macro
Such kind of operator overload will not work because C++ thinks such overload is ambiguous and it still prefer the built-in one which accepts and returns integer. Manually force type conversion seems to be unavoidable.
Users of the nvs API are likely to have `nvs_handle_t` in all cases, but
not all of them carry around the partition name and namespace name (as
they aren't needed after creating an `nvs_handle_t`).
Allow this common case to use nvs iteration without them tracking
additional data by using the `nvs_handle_t` to locate the namespace
index and the partition name by introducing an alterate to
`nvs_entry_find` called `nvs_entry_find_in_handle`, which operates
similarly except that it is given a `nvs_handle_t` instead of partition
and namespace strings.
This is somewhat more limited than the `nvs_entry_find` API as one
cannot examine all keys in a given partition.
Now the soc interrupts definitions are scattered around in the esp-idf
which are out of sync. Put interrupts definitions in soc/periph_defs.h
(!ESP32) or soc/soc.h(ESP32) together in soc/interrupts.h.
