Removed the old dynamically allocated GDMA channel approach.
It proved too unreliable as we couldn't not ensure consumers of the mbedtls
would properly free the channels after use.
Replaced by a single shared GDMA channel for AES and SHA, which won't be
released unless user specifically calls API for releasing it.
MbedTLS: Add software fallback for Modular Exponentiation for larger bignum operations
Closes WIFI-3257 and IDFGH-132
See merge request espressif/esp-idf!11928
Add configuration option to fallback to software implementation
for exponential mod incase of hardware is not supporting it
for larger MPI value.
Usecase:
ESP32C3 only supports till RSA3072 in hardware. This config option
will help to support 4k certificates for WPA enterprise connection.
RX process caches the session information in "ssl->in_ctr" not in "ssl->in_buf".
So when freeing the SSL, can't free the "ssl->in_ctr", because the "ssl->in_buf"
is empty.
Make the RX process like TX process, and cache the session information in
"ssl->in_buf", so that the cache buffer can be freed when freeing the SSL.
Closes https://github.com/espressif/esp-idf/issues/6104
DMA process didnt wait for idle before returning.
This meant that there was a potential for the dma
descriptors which were on the stack to be reclaimed
before the DMA operation finished.
Note: besides the esp-netif component, this commit also disables
net_sockets.c from mbedtls, which is one of the base components and uses BSD API (not specifically lwIP). This might be refactored to use CONFIG_SUPPORT_BSD_API instead of CONFIG_ESP_NETIF_TCPIP_LWIP
in the future.
It also disables smartconfig_ack.c and wifi_init.c from esp_wifi
component for referencing some lwIP config options (smartconfig_ack.c changes might be also
updated to check CONFIG_SUPPORT_BSD_API)
Merges https://github.com/espressif/esp-idf/pull/5856
Fixed MBEDTLS_SSL_PROTO_TLS1_1 still being defined even ifCONFIG_MBEDTLS_SSL_PROTO_TLS1_1 is not
Signed-off-by: Aditya Patwardhan <aditya.patwardhan@espressif.com>
Merges https://github.com/espressif/esp-idf/pull/5675
* Replaced crypotoauthlib with esp-cryptoauthlib
* Added menuconfig option for esp-tls about using HSM
* Added error codes for HSM in esp-tls,
* Added support to select different type of ATECC608A chips
* Added README, updated docs
* tcp_transport: Added option to enable secure_element for ssl
Closes https://github.com/espressif/esp-idf/issues/4432
* Add options to mbedtls for hardware acceleration
* Disable mbedtls EC curves if hardware acceleration is selected
since the hardware will have to define the curves supported
* Add a hardware ecdsa example
Earlier check was for only input buffer but it is quite likely to have
output buffer also from non-DMA memory range and hence requirement to
reallocate and then copy data from AES engine.
The GCM hardware accelerated algorithm for S2 would sometimes output
the wrong tag.
Added additional tests for AES and GCM
Re-enable HW GCM as default option
Configurable option to use IRAM as byte accessible memory (in single core mode) using
load-store (non-word aligned and non-word size IRAM access specific) exception handlers.
This allows to use IRAM for use-cases where certain performance penalty
(upto 170 cpu cycles per load or store operation) is acceptable. Additional configuration
option has been provided to redirect mbedTLS specific in-out content length buffers to
IRAM (in single core mode), allows to save 20KB per TLS connection.
this issue is mainly exposed when using larger (4096) client key in TLS mutual auth,
since it uses multiplications > 2048 when mbedtls_mpi_mul_mpi is used in recursion,
which works only if both operands point to different location than result since
mpi_mult_mpi_overlong() called mbedtls_mpi_grow() to reallocate buffers used in previous
pointer arithmetics and thus corrupting it. Fixed by growing the mpi buffer before
calling mpi_mult_mpi_overlong()
Activated AES, RSA and SHA hardware acceleration for esp32s2 and enabled related unit tests.
Updated with changes made for ESP32 from 0a04034, 961f59f and caea288.
Added performance targets for esp32s2beta
Closes IDF-757
It gave us a better performance of RSA operations. (2~11 times)
The old modexp implementation (Z = X ^ Y mod M) loaded all the data into
the hw registers and was waiting for completion, but due to
the hardware RSA implementation, the calculations always started with 4096 bit,
which took a lot of time.
Measurement results (measurements were made for keys: 2048, 3072 and 4096 bits)
(Old) - Sliding-window exponentiation (HAC 14.85):
keysize = 2048 bits
RSA key operation (performance): public [93206 us], private [280189 us]
keysize = 3072 bits
RSA key operation (performance): public [293614 us], private [858157 us]
keysize = 4096 bits
RSA key operation (performance): public [653192 us], private [1912126 us]
Instead (Old) - Sliding-window exponentiation (HAC 14.85) was implemented
(New) - Montgomery exponentiation (HAC 14.94) which showed
better performance on private and public keys.
keysize = 2048 bits
RSA key operation (performance): public [14504 us], private [149456 us]
keysize = 3072 bits
RSA key operation (performance): public [35073 us], private [392743 us]
keysize = 4096 bits
RSA key operation (performance): public [58650 us], private [787186 us]
For this reason, the old implementation was removed
and the MBEDTLS_HARDWARE_MPI option was turned on by default.
Why the MPI_INTERRUPT option is removed:
the old implementation used calculations on the hardware and
it took a lot of time (10ms - 500ms). And in order not to stand idle
while waiting for completion, an interrupt option was added.
This made it possible to carry out other tasks during the calculation,
and this one to block. The new method is free from such a drawback and
the maximum duration of one RSA HW operation does not exceed 70us (usually 2-70 μs).
This option is no longer needed.
Closes: IDF-965
Basically, in the portability layer, it is checked if the socket is
NON-block, and if not, then even the EAGAIN and EWOULDBLOCK errors are
diverted to a RECV error. This causes a problem for sockets with
receive timeouts set. When such a timeout is set, the condition for
NON_BLOCK isn't met and hence a hard error is returned.
Searching for EAGAIN and EWOULDBLOCK in lwip returns only 3 results
(accept, recvfrom, close) and all of them look to be genuine cases for
EWOULDBLOCK. So removing this check to make receive timeout with TLS
work.
- Additional menuconfig option to select either mbedTLS or Tinycrypt from NimBLE.
- Addition of `CMAC` and `ECP_RESTARTABLE` to mbedTLS menuconfig option and
`esp_config.h`.
- Changes NimBLE `component.mk` and `CMakeLists.txt` to support mbedTLS option.
- Minor changes to `app_mesh.c` application.
As per upgrade notes of lwIP v2.1.0:
socket API: according to the standard, SO_ERROR now only returns asynchronous errors.
All other/normal/synchronous errors are (and always were) available via 'errno'.
LWIP_SOCKET_SET_ERRNO has been removed - 'errno' is always set - and required!
Refer: https://www.nongnu.org/lwip/2_1_x/upgrading.html
Fixes https://github.com/espressif/esp-azure/issues/51
This update supports DTLS, TLS is a future TODO
components/coap/CMakeLists.txt:
components/coap/component.mk:
Add in the new files that have to be built
Replace libcoap/src/coap_notls.c with libcoap/src/coap_mbedtls.c
components/coap/libcoap:
Update the version to include the current version for supporting MbedTLS
components/coap/port/coap_debug.c:
components/coap/port/coap_mbedtls.c:
components/coap/port/include/coap/coap_dtls.h:
New port files for DTLS
components/coap/port/include/coap_config_posix.h:
Include building with MbedTLS
examples/protocols/coap_client/README.md:
examples/protocols/coap_client/main/CMakeLists.txt:
examples/protocols/coap_client/main/Kconfig.projbuild:
examples/protocols/coap_client/main/coap_client_example_main.c:
examples/protocols/coap_client/main/component.mk:
Update CoAP client to support DTLS
examples/protocols/coap_client/main/coap_ca.pem
examples/protocols/coap_client/main/coap_client.crt
examples/protocols/coap_client/main/coap_client.key
New PKI Certs for CoAP client (copied from wpa2_enterprise example)
examples/protocols/coap_server/README.md:
examples/protocols/coap_server/main/CMakeLists.txt:
examples/protocols/coap_server/main/Kconfig.projbuild:
examples/protocols/coap_server/main/coap_server_example_main.c:
examples/protocols/coap_server/main/component.mk:
Update CoAP server to support DTLS
Change "no data" to "Hello World!" to prevent confusion
examples/protocols/coap_server/main/coap_ca.pem
examples/protocols/coap_server/main/coap_server.crt
examples/protocols/coap_server/main/coap_server.key
New PKI Certs for CoAP server (copied from wpa2_enterprise example)
Closes https://github.com/espressif/esp-idf/pull/3345
Closes https://github.com/espressif/esp-idf/issues/1379
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... .
Cleaned up header files from unnecessary headers (releated to soc/... headers).
Hardware AES-CBC performance changes:
Release config 11.0MB/sec -> 10.8MB/sec
Debug config 9.4MB/sec -> 9.8MB/sec
(Unrolling the loop to optimize the check improves
performance at -Og, even with the fault check.)
1. separate rom include files and linkscript to esp_rom
2. modefiy "include rom/xxx.h" to "include esp32/rom/xxx.h"
3. Forward compatible
4. update mqtt
