Commit Graph

2584 Commits

Author SHA1 Message Date
michael
28c4ba1288 doc(log): document the log macros. 2017-08-28 16:25:39 +08:00
Jeroen Domburg
a589411a3c Place uart_tx_wait_idle in IRAM 2017-08-28 11:35:27 +08:00
Ivan Grokhotkov
d8b66e5088 soc: release interrupts which are not reserved by timers any more 2017-08-28 11:35:27 +08:00
Ivan Grokhotkov
42e9d49bb1 newlib: implement gettimeofday using of esp_timer 2017-08-28 11:35:27 +08:00
Ivan Grokhotkov
857a29872d esp_timer: add high resolution software timer API 2017-08-28 11:35:26 +08:00
Ivan Grokhotkov
a4fe12cb6d Merge branch 'bugfix/sdmmc_test' into 'master'
sdmmc: don't use high speed mode with SD over SPI

See merge request !1149
2017-08-28 11:32:20 +08:00
Jeroen Domburg
ce03879300 Merge branch 'bugfix/uart_wait_idle_iram' into 'master'
Place uart_tx_wait_idle in IRAM

See merge request !1157
2017-08-28 10:55:58 +08:00
Ivan Grokhotkov
b636f81619 Merge branch 'bugfix/spi_command' into 'master'
fix(spi_master): fix the command field to make it more intuitive to use.

See merge request !1119
2017-08-28 10:29:56 +08:00
michael
0cb14f1648 fix(spi_dma_rx): add check to avoid using SPI half-duplex mode DMA with both MOSI and MISO phases. 2017-08-26 02:15:30 +08:00
michael
dd1e6ea296 typo(spi_master): fix the definition of `SPI_DEVICE_BIT_LSBFIRST`.
also fix the documentation of spi_device_transmit.
2017-08-26 02:04:37 +08:00
Jeroen Domburg
3e4627479b Place uart_tx_wait_idle in IRAM 2017-08-25 17:46:28 +08:00
Jiang Jiang Jian
4654278b1b Merge branch 'bugfix/btdm_controller_hci_fc' into 'master'
component/bt: bugfix for hci acl flow control

See merge request !1151
2017-08-25 16:16:47 +08:00
Ivan Grokhotkov
631f552489 sdmmc: don't use high speed mode with SD over SPI
Disabling due to limitation of SPI driver (max 26MHz for full-duplex
mode over GPIO matrix)
2017-08-25 14:33:19 +08:00
Angus Gratton
703d143619 hwcrypto: Fix bug with concurrent SHA access
If two different types of SHA hashes were active in the hardware
concurrently, a race condition meant the SHA unit could be incorrectly
reset leading to all-zero results.
2017-08-25 16:08:03 +10:00
Angus Gratton
0ea4cd67dd mbedtls: Remove "unsafe" warning, enable AES by default & make SHA/MPI optional 2017-08-25 16:08:03 +10:00
Angus Gratton
afb6119504 dport access: Fix WDT bug (permanent locking) in non-pinned tasks
If scheduler switches cores in narrow window during esp_dport_access_stall_other_cpu_start(), could cause the stall
interrupt to occur on the running CPU - halting the CPU until WDT cleans up.

Related to https://github.com/espressif/esp-idf/issues/630
2017-08-25 16:08:03 +10:00
Angus Gratton
50e0a54630 esp32 hwcrypto: Use spinlock instead of lock to protect AES
More than doubles performance of mbedTLS AES self-tests.
2017-08-25 16:08:03 +10:00
Angus Gratton
2624e10055 esp32 hwcrypto: Use AES registers directly 2017-08-25 16:08:03 +10:00
Angus Gratton
e256fb6d96 hwcrypto: Use DPORT-safe accesses with AES 2017-08-25 16:08:03 +10:00
Angus Gratton
99c663a6e9 mbedtls tests: utility tests for APB corruption
Used when running mbedTLS self-tests to verify DPORT protection is working correctly.
2017-08-25 16:08:03 +10:00
Angus Gratton
d0c300c52d hwcrypto: SHA acceleration using safe DPORT reads 2017-08-25 16:08:03 +10:00
Angus Gratton
7be002ec0f hwcrypto bignum/MPI: Batch safe DPORT reads to improve performance 2017-08-25 16:08:02 +10:00
Angus Gratton
cb31222e8b dport access: Add _DPORT_REG_SET_BIT & _DPORT_REG_CLR_BIT 2017-08-25 16:08:02 +10:00
Angus Gratton
dc8c33892e dport access: Fix nested calls to DPORT_STALL_OTHER_CPU_START() 2017-08-25 16:08:02 +10:00
Ivan Grokhotkov
08287852ab esp32: add protection for DPORT registers of RSA 2017-08-25 16:08:02 +10:00
wangmengyang
d532f33bdb component/bt: bugfix for hci acl flow control
1. trigger hci data transmission upon reception of hci_host_nb_of_cmpl_pkts when hci acl flow control is in effect
2017-08-24 20:59:32 +08:00
Wu Jian Gang
791daea835 Merge branch 'bugfix/xtal_freq_40' into 'master'
esp32: by default, set 40MHz crystal frequency

See merge request !1140
2017-08-24 20:40:22 +08:00
Ivan Grokhotkov
a66df0826e soc: fix/update definitions related to FRC timers
1. BIT(8) of CTRL is actually read-only bit indicating interrupt status

2. BIT(0) or CTRL had inverted meaning: 1 is “level”, 0 is “edge”

3. Add definitions of prescaler values
2017-08-24 16:33:12 +08:00
Ivan Grokhotkov
0420c4ec82 Merge branch 'feature/multipart_nvs_support' into 'master'
Multiple partition support in NVS

See merge request !1129
2017-08-24 14:42:14 +08:00
Ivan Grokhotkov
b9cdbfea87 Merge branch 'test/UT_SDMMC' into 'master'
Enable SDMMC driver test cases

See merge request !1106
2017-08-24 14:41:39 +08:00
Ivan Grokhotkov
922c584de6 Merge branch 'feature/libsodium_use_mbedtls' into 'master'
libsodium: Use mbedTLS implementations for SHA256 & SHA512

See merge request !1121
2017-08-24 14:40:52 +08:00
Ivan Grokhotkov
87a0ec77b5 Merge branch 'bugfix/mbedtls_config_mismatch' into 'master'
mbedtls: Add a shim header to account for including "mbedtls/config.h" directly in program

See merge request !1125
2017-08-24 14:40:39 +08:00
Ivan Grokhotkov
d02e850785 Merge branch 'bugfix/nghttp2_v124' into 'master'
nghttp: Restore nghttp2 v1.24

See merge request !1132
2017-08-24 14:40:24 +08:00
Ivan Grokhotkov
e0e1c07bd1 Merge branch 'bugfix/console_cmd_register' into 'master'
console: initialize buf_size before calling open_memstream

See merge request !1138
2017-08-24 14:35:29 +08:00
Ivan Grokhotkov
0ead095512 Merge branch 'bugfix/dport_stall_in_esp32_component' into 'master'
Also do dport stalling in esp32 component

See merge request !1141
2017-08-24 14:35:16 +08:00
Ivan Grokhotkov
327f0b6225 Merge branch 'bugfix/menuconfig_phy' into 'master'
component/esp32 : move Phy out of Wifi section

See merge request !1145
2017-08-24 14:34:56 +08:00
Jiang Jiang Jian
72a6b26244 Merge branch 'bugfix/tw14823_lwip_assert_err' into 'master'
assert when close a connecting socket

See merge request !1136
2017-08-24 11:29:32 +08:00
Jiang Jiang Jian
d42208ffe8 Merge branch 'bugfix/ampdu_default_wifi_settings' into 'master'
wifi: Fix compilation error in WIFI_INIT_CONFIG_DEFAULT() if AMPDU disabled

See merge request !1139
2017-08-24 11:02:54 +08:00
Jiang Jiang Jian
258480822b Merge branch 'bugfix/btdm_config_local_privacy_func' into 'master'
component/bt: bugfix config local privacy

See merge request !1137
2017-08-24 10:48:57 +08:00
Jiang Jiang Jian
8b4229fcd6 Merge branch 'bugfix/btdm_fix_set_rand_addr_func' into 'master'
component/bt: fixbug_set_rand_addr()

See merge request !1123
2017-08-24 10:48:20 +08:00
Wang Jia Lin
f1ecffb46c Merge branch 'bugfix/touch_pad_driver' into 'master'
driver(touch): fix bug and add more features

See merge request !1056
2017-08-23 19:12:39 +08:00
Ivan Grokhotkov
de10032717 Merge branch 'feature/btdm_remove_gki' into 'master'
component/bt : remove all GKI reference

See merge request !1122
2017-08-23 18:01:54 +08:00
Tian Hao
08221589fc component/esp32 : move Phy outof Wifi section
1. move Phy out of Wifi section
2. lowercase the Ethernet and Phy from 2nd letter.
2017-08-23 17:51:31 +08:00
zhiweijian
19bf8cef1f Component/bt: bugifx config local privacy 2017-08-23 17:42:38 +08:00
Jeroen Domburg
123966deea Also do dport stalling in esp32 component 2017-08-23 16:43:57 +08:00
Ivan Grokhotkov
9a8c0392f5 esp32: by default, set 40MHz crystal frequency 2017-08-23 16:33:26 +08:00
Tian Hao
e4f63819a1 component/bt : remove all GKI reference
1. remove GKI(not use osi_free_and_reset)
2. modify mutex/semaphore to individual directory
3. set osi_malloc as malloc(previously use calloc)
4. change osi allocator debug osi_free
5. fix rebase of remove GKI
2017-08-23 15:29:30 +08:00
Angus Gratton
7755015f4f secure boot: Fix enabling secure boot on first bootloader boot
Bootloader would accidentally check its own image for a secure boot signature,
but bootloader is unsigned (protected by secure boot digest).
2017-08-23 11:19:42 +10:00
Angus Gratton
43e231c916 bootloader: Don't unnecessarily test OTA app slots more than once per boot
Would loop more than once through each OTA possibility, but really only
needs to try each slot once.
2017-08-23 11:19:42 +10:00
Angus Gratton
83a3241341 wifi: Fix compilation error in WIFI_INIT_CONFIG_DEFAULT() if AMPDU disabled 2017-08-23 09:33:47 +10:00
Ivan Grokhotkov
0ed64da963 console: initialize buf_size before calling open_memstream
POSIX open_memstream documentation [1] does not mention that it may use
the  value supplied in buf_size before the call.
newlib implementation of open_memstream does use it as a hint of the
buffer size [2]. To avoid using potential garbage in this variable,
newlib caps the size to 64kB (!).

If the allocation of this initial buffer fails, NULL file pointer is
returned. Previous code did not check returned file pointer and crashed
when it was used.

Initialize size to zero (in which case newlib allocates a 64 byte
buffer), and check the returned file pointer.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/open_memstream.html
[2] https://github.com/espressif/newlib-esp32/blob/23c0f21/newlib/libc/stdio/open_memstream.c#L26-L29
    https://github.com/espressif/newlib-esp32/blob/23c0f21/newlib/libc/stdio/open_memstream.c#L324-L336
2017-08-23 01:10:30 +08:00
Ivan Grokhotkov
2861f3e88e Merge branch 'bugfix/spi_dma_align' into 'master'
fix(spi_dma): fix the receive error with RX DMA start with non-aligned address.

See merge request !1112
2017-08-22 23:39:53 +08:00
Wangjialin
842caaab21 driver(touch): fix bug and add more features
1. add sens_struct.h
2. add definition of RTCCNTL and RTCIO
3. modify touch pad examples
4. update example code.
5. add comments add option in menuconfig
6. fix issue that pad index 8 and 9 are mismatched
7. add touch_pad_read_filtered() api to get value filtered by iir filter
8. modify touch pad isr func
9. Make the items in perihperal.ld in the sequence of address
10. delete Kconfig for touch pad
11. add touchpad filter APIs to adjust the filter
12. add touch_pad into index.rst
13. add touch_pad in Doxyfile
14. add touch_pad.rst
2017-08-22 21:21:39 +08:00
houchenyao
cf64c7e9a6 unit test: add sd env and spi env for sdmmc 2017-08-22 21:01:34 +08:00
zhangyanjiao
61f64e38d9 assert when close a connecting socket 2017-08-22 20:36:35 +08:00
Ivan Grokhotkov
4f4808445f Merge branch 'feature/sdmmc_highspeed_mode' into 'master'
SDMMC: add support for high-speed mode

See merge request !1108
2017-08-22 19:31:10 +08:00
Ivan Grokhotkov
0532d37373 Merge branch 'feature/esptool-v2.1' into 'master'
esptool: Update to v2.1 final release

See merge request !1131
2017-08-22 19:30:48 +08:00
Amey Inamdar
a2dcf7faa8 nvs: Support for handling multiple NVS partitions
This commit adds support for multiple NVS partitions. This provides application a flexibility to have multiple NVS
partitions such as separate partition with read-only manufacturing data and read-write partition with configuration.
Application can also use this to separate out application's configuration storage from system configuration.

This feature does not change any of the basic property of NVS subsystem. The same-named namespaces across partitions are
considered to be different namespaces. The original NVS API available for the applications remains unchanged. The only
difference is that instead of first NVS partition in the partition table, it now operates on the partition with label
"nvs" (which is default in the IDF provided partition table files). Additional APIs are provided to open a handle and
erase NVS with partition name as a parameter.

A test case is added in the host tests and it is made sure that all the host tests pass. nvs_rw_value app is also tested
with multiple partitions.

Signed-off-by: Amey Inamdar <amey.inamdar@gmail.com>
2017-08-22 13:48:14 +05:30
Amey Inamdar
3e4e4dd07a nvs_flash: Reduced visibility of handle counter
Monotonically increasing handle counter need not be visible outside the HandleEntry class.

Signed-off-by: Amey Inamdar <amey.inamdar@gmail.com>
2017-08-22 12:58:56 +05:30
Ivan Grokhotkov
08e787dc4d mbedtls: remove duplicate Kconfig options 2017-08-22 15:12:35 +08:00
Ivan Grokhotkov
fb43948413 Update several Kconfig files to make help texts compatible with ReST 2017-08-22 14:34:19 +08:00
zhiweijian
974cff4773 Component/bt: fixbug_set_rand_addr()
- The two most significant bits of the address shall be equal to 1
- All bits of the random part of the address shall not be equal to 1
- All bits of the random part of the address shall not be equal to 0
2017-08-22 14:25:10 +08:00
Jiang Jiang Jian
9b18625d29 Merge branch 'bugfix/memory_leak_when_run_wpa2' into 'master'
wpa2: fix memory leak when run wpa2

See merge request !1126
2017-08-22 14:18:17 +08:00
Jiang Jiang Jian
9f24f06a65 Merge branch 'bugfix/btdm_security_section_remove_bug' into 'master'
component/bt: Change the remove section error &&  SMP_INCLUDE marco

See merge request !1133
2017-08-22 14:13:29 +08:00
Jiang Jiang Jian
b0188b3f29 Merge branch 'bugfix/btdm_add_check_value_length_for_gatts_get_attribute_value' into 'master'
component/bt: add check value and length for esp_ble_gatts_get_attr_value(uint16…

See merge request !1110
2017-08-22 11:37:56 +08:00
Yulong
71d35c7770 component/bt: Change the remove section error. 2017-08-21 23:28:45 -04:00
Angus Gratton
581aa57a05 nghttp: Restore nghttp2 v1.24
We had already updated to v1.24 months ago, but the submodule commit was accidentally
reverted in 1fb85b494c.

Fixes (again) error when compiling with assertions disabled.

As reported on forum: https://esp32.com/viewtopic.php?f=13&t=2750&p=13069
2017-08-22 13:01:36 +10:00
Deng Xin
d739e6bf05 WPA2:Fix the issue memory leak when run wifi enterprise
fix the issue memory leak when run wpa2
2017-08-22 10:49:31 +08:00
Angus Gratton
d6c3fb52c8 esptool: Update to v2.1 final release
Replaces v2.1-beta1 release.

Compared to beta, fixes issues with espefuse.py not prompting correctly on Windows (TW11139).
2017-08-22 11:49:07 +10:00
michael
4c9754726f fix(spi_master): fix the command field to make it more intuitive to use. 2017-08-21 20:37:57 +08:00
Jiang Jiang Jian
fc85cb683d Merge branch 'feature/wifi_and_ip_event_process_refactor' into 'master'
Feature/wifi and ip event process refactor

See merge request !986
2017-08-21 19:49:30 +08:00
Jiang Jiang Jian
5c9d9ae696 Merge branch 'bugfix/btdm_smp_invalid_key_size' into 'master'
component/bt: Change the SMP key size analyzing conditions.

See merge request !958
2017-08-21 19:38:15 +08:00
Yulong
202c5783db component/bt:squash the 2 commits.
component/bt: cherry-pick the bugfix/btdm_api_manage_pair_info_#13119 to this branch.

component/bt: Change the ble gap API code format & added the status judgment in the btc_storage_load_bonded_ble_devices function.
2017-08-21 06:17:21 -04:00
Yulong
c5ea00c727 component/bt: Change the debug info. 2017-08-21 17:49:05 +08:00
Yulong
eebc2e2df1 component/bt: Change the btm ble security key size range. 2017-08-21 17:49:05 +08:00
Yulong
677f58577f component/bt: Change the SMP key size analyzing conditions. 2017-08-21 17:49:05 +08:00
Ivan Grokhotkov
abe9516fdc newlib: implement usleep 2017-08-21 15:58:28 +08:00
Ivan Grokhotkov
10f0543080 console: add support for terminal probing and dumb terminal mode 2017-08-21 15:58:28 +08:00
Ivan Grokhotkov
1e4587a09f vfs: implement fcntl via VFS interface 2017-08-21 15:58:28 +08:00
Ivan Grokhotkov
489c523870 vfs: support for blocking reads, more newline conversion options
Previously VFS driver for UART could only use simple non-blocking
functions to read from and write to the UART. UART driver provides more
complex blocking and interrupt-driven functions, which can be used
instead.
This commit adds optional support for using UART driver's functions.

Also added is a more flexible mechanism for configuring newline
conversion rules on input and output.

This commit also fixes a bug that all UARTs shared one static variable
used as a character buffer in newline conversion code. This variable is
changed to be per-UART.
2017-08-21 15:58:28 +08:00
Ivan Grokhotkov
a8075ea140 console/argtable3: expose arg_print_formatted function 2017-08-21 15:58:28 +08:00
Ivan Grokhotkov
160f842d35 console/argtable3: fix usage of char as argument to ctype functions 2017-08-21 15:58:27 +08:00
Ivan Grokhotkov
5de7c91a54 add console component and example 2017-08-21 15:58:27 +08:00
Jiang Jiang Jian
363f201603 Merge branch 'bugfix/exection_not_init_bt_use_smp_api_#13691' into 'master'
component/bt: Added the bluedorid status checkout for the BLE security API.

See merge request !1045
2017-08-21 14:51:17 +08:00
Liu Zhi Fu
b45433110f tcpip_adapter/lwip: optimize wifi/ip event 2017-08-21 14:36:44 +08:00
Angus Gratton
2c0ff0c1e1 mbedtls: Add a shim header to account for including "mbedtls/config.h" directly in program
Previously this resulted in a config mismatch between default config and esp_config.h

Closes https://github.com/espressif/esp-idf/issues/711
2017-08-21 12:37:53 +10:00
Angus Gratton
f44091e48a Merge branch 'feature/mbedtls_cipher_config' into 'master'
mbedtls: Add compile-time configuration, better default configuration

See merge request !1118
2017-08-21 07:19:24 +08:00
zhiweijian
6276e71fc1 Component/bt: add check value and length for esp_ble_gatts_get_attr_value(uint16_t attr_handle, uint16_t *length, const uint8_t **value); 2017-08-20 19:12:57 +08:00
Ivan Grokhotkov
bb7d5fc10f Merge branch 'feature/remove_ethernet_config_option' into 'master'
ethernet: remove CONFIG_ETHERNET

See merge request !1116
2017-08-18 18:45:49 +08:00
Angus Gratton
66ad84d318 mbedtls: Add more config options to disable Elliptic Curve features
Can save up to an additional 20KB when not using EC in TLS, or disable
unwanted features as needed.
2017-08-18 17:44:33 +10:00
Angus Gratton
c0f65f6680 mbedtls: Expose compile-time config, disable some things by default
* Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default
* Saves about 40KB from the default TLS client code size
* Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES)
  (ping https://github.com/espressif/arduino-esp32/issues/575 )
* Allows up to another 20-30KB code size to be trimmed without security
  implications if using DER formatted certificates, RSA ciphersuites only,
  etc.
* Can save up to another 8KB by setting the TLS Role to Server or Client only.
2017-08-18 17:15:08 +10:00
Angus Gratton
979eabeba5 libsodium: Use mbedTLS implementations for SHA256 & SHA512
* Adds support for hardware accelerated SHA
* Saves code size (~5.5KB) for SHA256 & SHA512 where libsodium & mbedTLS both used
2017-08-18 16:29:04 +10:00
Kedar Sovani
4c1c62a453 wifi: refactor code to match ethernet's init function structure 2017-08-18 08:33:02 +05:30
Kedar Sovani
8348a71847 ethernet: remove CONFIG_ETHERNET
1. Hello World application shows no footprint difference before and
after this change
2. examples/ethernet/ethernet application compiles properly (can't
test with my board)
2017-08-18 08:31:43 +05:30
michael
a01db5569c fix(spi_dma): fix the receive error with RX DMA start with non-aligned address. 2017-08-18 10:14:49 +08:00
Ivan Grokhotkov
eddc07eebf Merge branch 'feature/set_static_ip_to_zero' into 'master'
Zero static IP address can also be set

See merge request !1101
2017-08-16 19:12:01 +08:00
Ivan Grokhotkov
14c96838bf sdmmc: add more comments about card initialization steps 2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
6baf8195ee sdmmc: add support for high speed (HS) mode
By default SD cards are initialized in default speed (DS) mode. Enabling
HS mode requires SWITCH_FUNC command to be sent twice: first time to
query if the card supports switching to HS mode, second time to perform
the switch.

This change implements SWITCH_FUNC command and adds the procedure to
switch to HS mode.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
9253d316e7 sdmmc: implement deselecting a card
In some cases the card needs to be returned to standby mode from data
transfer mode. This is done using CMD7 command, which does not receive
any response in this case.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
f908425b13 sdmmc: introduce is_app_cmd flag, check it along with opcode
‘make_hw_cmd’ function checks opcodes in a few cases. Comparing opcode
does not tell the whole story, because for some SD commands there is are
APP commands with the same opcodes. This change introduces a flag which
indicates whether the next command is going to be an APP command.
The check for APP_SET_BUS_WIDTH command is updated to use this flag.
This fixes a bug with an unexpected STOP_TRANSMISSION command sent after
SWITCH_FUNC command, which has opcode 6, same as APP_SET_BUS_WIDTH.
2017-08-16 18:59:04 +08:00