Commit Graph

41 Commits

Author SHA1 Message Date
laokaiyao
8677216576 esp32h2: renaming esp32h2 to esp32h4 2022-11-08 17:05:33 +08:00
wuzhenghui
a7b549acca esp32c6: add esp_pm support 2022-09-26 20:32:13 +08:00
Michael (XIAO Xufeng)
746f4b814c uart: move frequency of clock sources out of HAL 2022-08-15 18:55:43 +00:00
Guillaume Souchere
6005cc9163 hal: Deprecate interrupt_controller_hal.h, cpu_hal.h and cpu_ll.h interfaces
This commit marks all functions in interrupt_controller_hal.h, cpu_ll.h and cpu_hal.h as deprecated.
Users should use functions from esp_cpu.h instead.
2022-07-22 00:06:06 +08:00
Darian Leung
daa950d9ed freertos: Replace portSET_INTERRUPT_MASK_FROM_ISR() call for SMP
The behavior of portSET_INTERRUPT_MASK_FROM_ISR() has changed in SMP FreeRTOS. It's
previous behavior is now implemented in portDISABLE_INTERRUPTS() and portRESTORE_INTERRUPTS().

This commit replaces all portSET_INTERRUPT_MASK_FROM_ISR() and portCLEAR_INTERRUPT_MASK_FROM_ISR()
calls with portDISABLE_INTERRUPTS() and portRESTORE_INTERRUPTS() respectively
2022-05-30 06:11:24 +08:00
morris
722fde218d uart: add default source clock for all targets 2022-05-09 11:26:30 +08:00
Jiang Jiang Jian
1b81efc320 Merge branch 'bugfix/idle_task_skipped_light_sleep' into 'master'
pm_impl: fix neither enter light sleep nor enter "waiti" state in idle task

Closes IDFGH-6294

See merge request espressif/esp-idf!17820
2022-04-28 16:11:29 +08:00
Marius Vikhammer
d2872095f9 soc: moved kconfig options out of the target component.
Moved the following kconfig options out of the target component:
 * CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
 * ESP*_REV_MIN -> esp_hw_support
 * ESP*_TIME_SYSCALL -> newlib
 * ESP*_RTC_* -> esp_hw_support

Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
2022-04-21 12:09:43 +08:00
gaoxiaojie
a64cd9c908 pm_impl: fix neither enter light sleep nor enter waiti state in idle task 2022-04-20 17:28:17 +08:00
songruo
60bb5c913d clk_tree: prework of introducing clk subsystem control
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
   upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
   Modify the NGed drivers to adopt new clock ids
2022-04-11 12:09:06 +08:00
laokaiyao
cf049e15ed esp8684: rename target to esp32c2 2022-01-19 11:08:57 +08:00
Cao Sen Miao
eddc196081 esp_clk: refactor target/clk.h to private/esp_clk.h 2021-11-26 14:56:30 +08:00
xiongweichao
422cf3cf37 Fix crash caused by bluetooth high level interrupt 2021-11-10 16:11:10 +08:00
Cao Sen Miao
a9f0a3531e ESP8684: add driver esp_pm heap support 2021-11-06 17:33:44 +08:00
Darian Leung
d6f2fa4bab freertos: Remove critical nested macros
This commit removes the following critical nested macros as follows:

- portENTER_CRITICAL_NESTED()
- portEXIT_CRITICAL_NESTED()

They are replaced with portSET_INTERRUPT_MASK_FROM_ISR() and
portCLEAR_INTERRUPT_MASK_FROM_ISR() which are the proper FreeRTOS interfaces.

Created a portmacro_deprecated.h for each port to contain deprecated API
that were originally from portmacro.h
2021-10-22 13:17:20 +08:00
Li Shuai
d3b5f97573 system: fix pm lock issue in dual core mode 2021-08-11 16:00:07 +08:00
Konstantin Kondrashov
29f581fc70 freertos(esp32s3): SysTick uses systimer 2021-08-04 20:33:44 +08:00
Li Shuai
c460905fd9 fix RTOS SysTick cycle time error caused by DFS 2021-07-22 21:48:56 +08:00
Shu Chen
6fce2930d0 esp32h2: enable more components to support esp32h2
Involved components:
 * app_trace
 * esp-tls
 * esp_adc_cal
 * esp_pm
 * esp_serial_slave_link
 * esp_timer
 * freertos
 * idf_test
 * log
 * mbedtls
 * newlib
 * perfmon
 * spi_flash
 * spiffs
 * ulp
 * unity
 * vfs
2021-07-01 19:53:11 +08:00
KonstantinKondrashov
f9ad16bb66 esp_timer: Timers with skip_unhandled_events option won't wake up system from light sleep 2021-06-19 12:45:17 +08:00
ninh
91dbae3eb5 esp_pm: allow dfs to swith down alltime if no lightsleep 2021-04-29 18:41:00 +08:00
Jiang Jiang Jian
d6a2a67006 Merge branch 'bugfix/fix_some_pm_issue' into 'master'
esp_pm: fix an issue and add an interface

Closes IDF-2984 and IDF-2944

See merge request espressif/esp-idf!12787
2021-04-13 03:42:46 +00:00
Renz Bagaporo
586023790e esp_system: move sleep modes to esp_hw_support, power down light sleep to esp_pm 2021-04-07 17:53:37 +08:00
ninh
7395e075f8 esp_pm: fix an issue and add an interface 2021-04-01 02:23:42 +00:00
Li Shuai
b3bc27972e light sleep: add software workaround for esp32c3 gpio reset issue 2021-03-25 15:03:09 +08:00
Li Shuai
1595973fe8 light sleep: some default parameters optimization 2021-03-10 18:22:41 +00:00
Angus Gratton
d6f4d99d93 core system: Fix warnings in compilation when assertions are disabled
Adds a CI config for hello world that sets this, to catch future regressions
2021-03-03 10:26:57 +11:00
Sachin Parekh
e6ccb812b2 esp_pm: Label each column of lock dump 2021-02-11 18:44:51 +05:30
Li Shuai
f168ac3b39 light sleep: add cpu power down support for esp32c3 2021-01-19 14:51:50 +08:00
Li Shuai
ac7d1bec76 light sleep: overhead time accuracy optimization for esp32c3 2021-01-19 14:50:58 +08:00
Li Shuai
355dd10257 light sleep: dfs support for esp32c3 2021-01-19 14:50:58 +08:00
ninh
659d805411 esp_wifi: light sleep optimization 2021-01-18 15:31:03 +08:00
ninh
27aa6c289f components/pm: Add slp gpio configure workaround 2021-01-15 15:34:45 +08:00
KonstantinKondrashov
dada7cd035 global: Uses CCOUNT API instead of XTHAL macro 2021-01-12 16:24:23 +08:00
Armando
05a4a8d864 uart: seperate sclk and baudrate setting 2020-11-24 19:12:52 +08:00
Armando
fb8b905539 uart: add uart support on esp32s3 2020-11-24 19:12:51 +08:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit)
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
Ivan Grokhotkov
50ef2f97d6 esp_pm: fix garbage on UART when CONFIG_PM_ENABLE=y
`uart_ll_get_txfifo_len` returns the number of bytes available in the
TX FIFO; The condition we need is "FIFO empty", not "FIFO has free
space". `uart_ll_is_tx_idle` does that, and also ensures that the last
character popped from the TX FIFO has been fully transmitted.
2020-10-14 19:43:53 +02:00
Renz Bagaporo
17b2d7864e esp32s3: move s3 pm to esp_pm 2020-09-25 05:24:10 +00:00
Renz Bagaporo
fb749440fd esp_pm: create pm init function 2020-09-25 05:24:10 +00:00
Renz Bagaporo
6462f9bfe1 esp32, esp32s2: create esp_pm component 2020-09-25 05:24:10 +00:00