zwx
38bbc918c4
fix(uart): remove unnecessary wait when sending message to ring buffer
2024-06-07 11:45:40 +08:00
morris
8318a2ad44
Merge branch 'feature/usb_new_phy_driver_collective_backport_v5.1' into 'release/v5.1'
...
refactor(usb/host): PHY driver preqrequisite refacotring collective backport (v5.1)
See merge request espressif/esp-idf!29791
2024-05-31 22:30:32 +08:00
Jiang Jiang Jian
91df5f03e9
Merge branch 'doc/add_description_for_pd_top_gpio_configuration_v5.1' into 'release/v5.1'
...
docs(esp_pm): Adding notes on configuring GPIOs when using PD_TOP sleep (v5.1)
See merge request espressif/esp-idf!30797
2024-05-21 12:04:46 +08:00
Darian Leung
4f996fc421
feat(hal/usb): Update USB WRAP and USJ LL
...
- Added LL cap macros to distinguish feature differences between the LLs of
different targets:
- '..._LL_EXT_PHY_SUPPORTED' indicates whether the USB WRAP/USJ supports
routing to an external FSLS PHY.
- Added 'usb_wrap_types.h' and 'usb_serial_jtag_types.h' to provide types used
in LLs.
- Fixed some spelling/naming issues as part of code-spell pre-commit
2024-05-13 17:36:34 +08:00
Darian Leung
c776d40df1
refactor(hal/usb): Remove usb_fsls_phy_ll.h
...
For targets that only contain a USJ peripheral (and not a DWC OTG), their
'usb_fsls_phy_ll.h' headers only contain a single function
('usb_fsls_phy_ll_int_jtag_enable()') whose feature is already covered by
functions in 'usb_serial_jtag_ll.h'. Thus, this header is redundant.
This commit does the following:
- Remove 'usb_fsls_phy_ll.h' for targets that only contain a USJ peripheral
- Rename 'usb_fsls_phy_[hal|ll].[h|c]' to `usb_wrap_[hal|ll].[h|c]` for targets
that contain a DWC OTG peripheral. This better reflects the underlying peripheral
that the LL header accesses.
2024-05-13 17:36:33 +08:00
wuzhenghui
57ef28a6c6
docs(gpio): add description for gpio_force_hold_all & gpio_force_unhold_all
...
Closes https://github.com/espressif/esp-idf/issues/13186
2024-05-13 16:24:56 +08:00
morris
9808619d52
Merge branch 'bugfix/fix_gpio_etm_multi_task_v5.1' into 'release/v5.1'
...
fix(gpio_etm): allow one GPIO binds to multiple ETM tasks (v5.1)
See merge request espressif/esp-idf!30457
2024-05-13 15:59:44 +08:00
wuzhenghui
2e21a74d85
docs(esp_pm): Adding notes on configuring GPIOs when using PD_TOP sleep
...
Closes https://github.com/espressif/esp-idf/issues/13143
2024-05-13 15:58:15 +08:00
morris
442a798083
Merge branch 'feat/add_example_usj_v5.1' into 'release/v5.1'
...
change(usb_serial_jtag): Add example for usb serial jtag echo (backport v5.1)
See merge request espressif/esp-idf!30020
2024-05-11 22:37:34 +08:00
morris
01b912a9e5
Merge branch 'fix/uart_wakeup_threshold_v5.1' into 'release/v5.1'
...
fix(uart): Fix mismatch wakeup rising edges required with the threshold configured (v5.1)
See merge request espressif/esp-idf!30464
2024-05-10 22:59:34 +08:00
morris
33b5b78e36
Merge branch 'feature/parlio_tx_nonblock_queue_v5.1' into 'release/v5.1'
...
feat(parlio_tx): support non-blocking transaction queue (v5.1)
See merge request espressif/esp-idf!29722
2024-05-10 22:56:32 +08:00
morris
a2b9a076b7
Merge branch 'bugfix/unsupport_partial_receive_on_esp32_v5.1' into 'release/v5.1'
...
fix(rmt): Fix the RMT RX filter not working correctly on esp32/s2 (v5.1)
See merge request espressif/esp-idf!30078
2024-05-10 22:55:59 +08:00
Song Ruo Jing
a664c71fd7
fix(uart): Fix mismatch wakeup rising edges required with the threshold configured
...
Closes https://github.com/espressif/esp-idf/issues/12586
2024-04-24 17:21:37 +08:00
Song Ruo Jing
c57bfa3737
fix(gpio_etm): allow one GPIO binds to multiple ETM tasks
2024-04-24 17:10:03 +08:00
Jiang Jiang Jian
ac3087ea36
Merge branch 'bugfix/gptimer_alarm_config_in_sram_v5.1' into 'release/v5.1'
...
feat(gptimer): check the alarm config is not in flash (v5.1)
See merge request espressif/esp-idf!30135
2024-04-12 09:08:41 +08:00
morris
4a497e1212
feat(gptimer): check the alarm config is not in flash
...
related to https://github.com/espressif/esp-idf/issues/13543
2024-04-09 17:33:26 +08:00
morris
491f4af657
fix(rmt): fix the counting clock used by rx filter on esp32/s2
...
is always APB, independent to the channel clock selection
Closes https://github.com/espressif/esp-idf/issues/13510
2024-04-08 11:50:37 +08:00
Cao Sen Miao
93b2297dc1
fix(usb_serial_jtag): Fix issue that buffer seems not flush when TX buffer is full and flush slow,
...
Closes https://github.com/espressif/esp-idf/issues/12628
2024-04-07 10:46:37 +08:00
Jeroen Domburg
28e2ab09ea
fix(driver): Add docs and driver fix for the case where a full EP does not cause the host to pickup the data
2024-04-07 10:46:34 +08:00
Omar Chebib
4c896cbb3a
fix(i2c): fix issues related to timeout and alive interval tick
...
Fixes https://github.com/espressif/esp-idf/issues/4999
Former usage of I2C_CMD_ALIVE_INTERVAL_TICK macro overrode the ticks_to_wait
parameter when the latter was too big
2024-04-02 10:43:00 +08:00
morris
8bacd5aab3
feat(parlio_tx): support non-blocking transaction queue
2024-03-19 13:15:15 +08:00
Marius Vikhammer
929a8449bd
Merge branch 'feature/usb_host_collective_backport_v5.1' into 'release/v5.1'
...
USB Host: Collective backport to v5.1
See merge request espressif/esp-idf!28096
2024-03-01 09:28:23 +08:00
morris
ba14fc20d3
Merge branch 'bugfix/fix_adc_reset_issue_on_legacy_v5.1' into 'release/v5.1'
...
fix(adc): fix adc continuous get less results beacuse do not reset apb clk(legacy) (v5.1)
See merge request espressif/esp-idf!28333
2024-02-29 10:25:28 +08:00
Darian Leung
d837836f84
refactor(hal/usb): Rename usb_fsls_phy API to match header/source names
...
Note: Also fixed some formatting issues in usb_wrap_struct.h
2024-02-28 16:09:52 +08:00
Darian Leung
148cc6e75d
refactor(hal/usb): Rename usb_phy files to usb_fsls_phy
...
This commit renames USB PHY related HAL files from "usb_phy_xxx" to
"usb_fsls_phy_xxx" since they are only designed to support Full-Speed/Low-Speed
Serial USB PHYs. This renmaing is done to accommodate future USB PHYs that use
other PHY interfaces (e.g., UTMI, ULPI etc).
2024-02-28 16:09:52 +08:00
Cao Sen Miao
30095494be
fix(tsens): 300us delay in phy cause extra power consumption
2024-02-28 12:36:04 +08:00
Cao Sen Miao
6932e5958b
fix(tsens,adc): Fix issue that disable adc will make temperature sensor crash,
...
Closes https://github.com/espressif/esp-idf/issues/12921
2024-02-28 12:35:59 +08:00
Cao Sen Miao
c205bbf90f
fix(temperature_sensor): Fix the value is incorrect if disable and enable again
...
Closes https://github.com/espressif/esp-idf/issues/12864
2024-02-28 12:35:53 +08:00
morris
bfd1cfd382
Merge branch 'feature/rmt_encoder_memory_allocator_v5.1' into 'release/v5.1'
...
feat(rmt): added a help function for allocating encoder memory (v5.1)
See merge request espressif/esp-idf!28791
2024-02-28 11:39:58 +08:00
morris
6e44d4ebfc
Merge branch 'bugfix/mcpwm_reset_generator_gpio_v5.1' into 'release/v5.1'
...
fix(mcpwm): reset GPIO used by generator after delete (v5.1)
See merge request espressif/esp-idf!28832
2024-02-28 11:39:02 +08:00
morris
8ab2edda00
fix(mcpwm): reset GPIO used by generator after delete
...
Closes https://github.com/espressif/esp-idf/issues/12980
2024-02-01 17:49:18 +08:00
morris
dcf0d5b67c
feat(rmt): added a help function for allocating encoder memory
...
The encoder memory location should respect the RMT_MEM_ALLOC_CAPS,
which is affected by some Kconfig options, like ISR_IRAM_SAFE
Closes https://github.com/espressif/esp-idf/issues/13032
2024-01-30 17:03:54 +08:00
morris
1daeac210b
feat(rmt): support update bytes encoder configurations at runtime
...
Closes https://github.com/espressif/esp-idf/issues/12775
2024-01-29 13:28:53 +08:00
wanlei
e3532b522e
fix(i2c): test app change gpio
2024-01-18 11:13:06 +08:00
gaoxu
0ad58fe10e
fix(adc): fix adc continuous get less results beacuse do not reset apb clk(legacy)
2024-01-08 16:11:53 +08:00
Song Ruo Jing
0da4b0867b
change(uart): improved the internal logic of uart_read_bytes
...
Ringbuffer usage becomes more efficient with the use of xRingbufferReceiveUpTo
Closes https://github.com/espressif/esp-idf/issues/12386
2024-01-02 20:21:39 +08:00
sonika.rathi
633a3b06db
fix(vfs/uart): add UART VFS select callback in IRAM
...
UART VFS select callback is placed in IRAM when CONFIG_UART_ISR_IN_IRAM is enabled
2023-11-21 14:17:08 +01:00
morris
6bc8a025d5
Merge branch 'bugfix/ledc_max_duty_cycle_v5.1' into 'release/v5.1'
...
fix(ledc): fix ledc driver 100% duty cycle configuration (backport v5.1)
See merge request espressif/esp-idf!27179
2023-11-21 10:58:16 +08:00
Jiang Jiang Jian
0e1ec38785
Merge branch 'bugfix/fix_lightsleep_current_leakage_on_usj_pad_v5.1' into 'release/v5.1'
...
fix(esp_hw_support): fix lightsleep current leakage on usb pad (backport v5.1)
See merge request espressif/esp-idf!27205
2023-11-21 10:51:11 +08:00
morris
1b3713f7cd
Merge branch 'feature/support_adc_calibration_on_h2_v5.1' into 'release/v5.1'
...
adc_cali: supported adc calibration v1 on ESP32H2 (v5.1)
See merge request espressif/esp-idf!26963
2023-11-17 16:41:00 +08:00
morris
ddb6d22468
Merge branch 'feature/gpio_dump_io_info_v5.1' into 'release/v5.1'
...
feat(gpio): add a dump API to dump IO configurations (v5.1)
See merge request espressif/esp-idf!26870
2023-11-17 16:30:22 +08:00
morris
ceb0aec0cc
Merge branch 'bugfix/rmt_stop_issue_v5.1' into 'release/v5.1'
...
fix(rmt): a disabled channel may pick up a pending transaction (v5.1)
See merge request espressif/esp-idf!26779
2023-11-17 16:27:21 +08:00
Song Ruo Jing
03299962f6
fix(ledc): fix ledc driver 100% duty cycle configuration
...
Update ledc duty cycle value range in doxygen.
Fix duty configuration error at 100% duty cycle for ESP32.
Improve LEDC API doxygen.
Closes https://github.com/espressif/esp-idf/pull/11516
Closes https://github.com/espressif/esp-idf/issues/12593
Closes https://github.com/espressif/esp-idf/issues/12083
2023-11-17 12:38:32 +08:00
wuzhenghui
6ae596c764
fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad
2023-11-16 20:03:30 +08:00
morris
bfeae3857c
feat(rmt): support calling rmt_receive in ISR callback
2023-11-15 05:57:45 +00:00
morris
d260d43168
fix(rmt): a disabled channel may pick up a pending transaction
...
because in the trans_done interrupt, the driver didn't check the channel FSM
2023-11-15 05:57:45 +00:00
Chen Jichang
0ce2683d81
feature(MCPWM): Add MCPWM trigger driver and test
...
Each MCPWM operator has two Trigger (named T0 and T1), and they can be
routed to GPIO fault signal or timer sync event.Generator can be set up
to perform different action on Trigger event.
This commit add a trigger driver and a test for the driver.
2023-11-15 05:57:37 +00:00
morris
efafacae40
Merge branch 'feature/mcpwm_timer_change_freq_v5.1' into 'release/v5.1'
...
feat(mcpwm): support update timer period dynamically (v5.1)
See merge request espressif/esp-idf!26624
2023-11-13 17:55:52 +08:00
gaoxu
c5e107c53d
feat(adc_cali): Add ADC calibration support for ESP32H2
2023-11-13 03:04:03 +00:00
Armando
6de9757a4b
fix(adc): rename ADC_ATTEN_DB_11 to ADC_ATTEN_DB_12
...
By design, it's 12 dB. There're errors among chips, so the actual
attenuation will be 11dB more or less
2023-11-07 14:09:21 +08:00