Commit Graph

610 Commits

Author SHA1 Message Date
XiongYu
6d57757840 Modify the rmt_mem_num maximum limit value from 15 to 8. 2018-07-16 19:10:42 +08:00
hou wen xiang
e2b9b70800 driver(uart): Fix uart time_out bug when using ref_tick 2018-07-16 16:56:14 +08:00
Angus Gratton
e5d2406b1d Merge branch 'bugfix/spi_cs_setup_fulldup' into 'master'
fix(spi_master): allow to use cs_ena_pretrans in full duplex mode without…

See merge request idf/esp-idf!2576
2018-07-16 16:30:36 +08:00
Jiang Jiang Jian
8809fabcd5 Merge branch 'bugfix/ledc_duty_and_freq' into 'master'
bugfix(ledc): fix bugs reported from unit-test and github.

See merge request idf/esp-idf!2735
2018-07-16 12:12:48 +08:00
Angus Gratton
2ae758ebcb Merge branch 'bugfix/spi_sdio_sdkconfig_include' into 'master'
sdio_example/spi: fix sdkconfig include issue

See merge request idf/esp-idf!2756
2018-07-16 08:00:15 +08:00
Ivan Grokhotkov
b354770f42 Merge branch 'bugfix/fixes_from_github' into 'master'
Fixes from Github

See merge request idf/esp-idf!2730
2018-07-13 15:03:50 +08:00
Ivan Grokhotkov
6d46eed8e4 sdmmc: enable host auto_stop only for certain commands
Perviously host send_auto_stop flag would be set for every data
transfer over 1 block long. This caused stop commands to be sent
after CMD53, which shouldn't be done. Fix by adding an explicit list
of commands for which send_auto_stop should be set.
2018-07-13 03:28:10 +00:00
hou wen xiang
5402ace528 driver(gpio) : Fixed the gpio related bug for release v3.1. 2018-07-12 20:19:02 +08:00
Angus Gratton
a67d5d89e0 Replace all DOS line endings with Unix
Command run was:
git ls-tree -r HEAD --name-only | xargs dos2unix
2018-07-12 19:10:37 +08:00
Michael (XIAO Xufeng)
95dbfbe4c0 sdio_example/spi: fix sdkconfig include issue
(MINOR CHANGES)
2018-07-12 15:59:16 +08:00
Angus Gratton
04caff2fb2 Merge branch 'fix/sdio_speed_4bit' into 'master'
fix(sdio): update sdio to better run in 4bit HS mode

See merge request idf/esp-idf!2704
2018-07-12 08:54:03 +08:00
Darian Leung
882b50dd8c driver: Fix memory leak in rtc_isr_deregister()
Closes #2179
2018-07-11 21:34:09 +08:00
Wangjialin
ab44c6ecc2 bugfix(ledc): fix bugs reported from unit-test and github.
1. In ledc_set_duty_and_update, return if duty updated. Close https://github.com/espressif/esp-idf/issues/2082
2. fix ledc_set_freq function for low speed mode.
2018-07-10 02:22:23 +08:00
Anton Maklakov
27311811e0 Merge branch 'bugfix/gcc8_complation_errors' into 'master'
Warnings and errors detected by GCC8

See merge request idf/esp-idf!2703
2018-07-09 22:55:52 +08:00
Alexey Gerenkov
c2dc09304c gcc8_newlib3: Compilation warnings and errors not specific to newlib v3 2018-07-09 13:22:24 +03:00
Le-Andrew
a8da9c1b96 Fixed typos on booleans.
Merges https://github.com/espressif/esp-idf/pull/2067
2018-07-09 14:36:06 +08:00
michael
c34672e7dc fix(sdmmc): disable all pulldowns used by sdmmc host 2018-07-06 18:17:51 +08:00
michael
597eda5f0b fix(sdio_slave): improve sdio slave for high speed and 4 bit mode 2018-07-06 18:17:50 +08:00
michael
823ebba0f0 fix(sdio_slave): fix minor issues like return value of send function, output arg, etc. 2018-07-06 18:17:49 +08:00
Darian Leung
1d2727f4c8 CAN Driver
The following commit contains the first version of the ESP32 CAN Driver.

closes #544
2018-07-04 14:01:57 +08:00
Alex Lisitsyn
9ba0808228 driver: fix rs485 test 2018-07-03 13:26:28 +02:00
Angus Gratton
909eec9c3b Merge branch 'feature/uart_add_rs485_interface_support' into 'master'
driver: add rs485 half duplex interface support to uart driver

See merge request idf/esp-idf!2415
2018-07-03 14:34:33 +08:00
Alex Lisitsyn
a9fca0c775 driver: add rs485 half duplex interface support to uart driver (fix after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output
uart.c: remove reset using UART_RXFIFO_RST from driver.
readme.md: Update example description

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
a952eb1a92 driver: add rs485 half duplex interface support to uart driver (fix indentation after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
ef5dc73f6f driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
d096b3abb8 driver: add rs485 half duplex interface support to uart driver (remove ignore tag to check ut case)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
b76693fe20 driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
51e9cf6848 driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Michael (XIAO Xufeng)
3d23fe9a61 feature(spi): provide macro to write multi-byte data straightly
resolves https://github.com/espressif/esp-idf/issues/2062
2018-07-02 15:34:47 +08:00
houchenyao
1878109a7f bugfix: fix pcnt case "PCNT interrupt method test(control IO is high)" 2018-06-26 13:35:14 +08:00
michael
8676830e61 fix(spi_master): allow to use cs_ena_pretrans in full duplex mode without command and address phases 2018-06-25 04:30:14 +00:00
hou wen xiang
10e8e22558 driver(mcpwm): Fix mcpwm api in mcpwm.c mismatch with mcpwm.h bug. 2018-06-22 12:26:43 +08:00
Konstantin Kondrashov
32da455384 soc: Fix check_long_hold_gpio and move def to soc
Fix factory_reset_pin init as input
Move definition a structure rtc_gpio_desc to soc

Closes https://github.com/espressif/esp-idf/issues/2030
2018-06-22 09:20:27 +05:00
Ivan Grokhotkov
99b075b28a Merge branch 'example/sdio_example' into 'master'
example(sdio): example to use sdmmc host to do SDIO communication with SDIO slave

See merge request idf/esp-idf!1946
2018-06-21 13:55:23 +08:00
michael
8ab87a6a87 chore(sdio_slave): format source files 2018-06-20 07:00:05 +00:00
houchenyao
3238c6f968 test: components/driver: pcnt case 2018-06-20 06:00:26 +00:00
Ivan Grokhotkov
4b91c82cc4 Merge branch 'feat/sdio_pullup' into 'master'
feature(sdio): add features to make SDIO slave compatible with more devkits

See merge request idf/esp-idf!2454
2018-06-20 13:58:56 +08:00
Angus Gratton
c1fdd45001 Merge branch 'bugfix/fix_touch_pad_can_not_wake_up' into 'master'
bugfix(touch pad): modify deep-sleep example and add note for sleep api

See merge request idf/esp-idf!2553
2018-06-20 11:51:46 +08:00
fuzhibo
9a0d57b90b bugfix(touch pad): modify deep-sleep example and add note for sleep api.
Closes https://github.com/espressif/esp-idf/issues/2052
2018-06-20 10:57:26 +08:00
He Yin Ling
8956f35be5 Merge branch 'test/driver_ledc' into 'master'
test: add ledc test cases

See merge request idf/esp-idf!1782
2018-06-19 15:14:16 +08:00
Angus Gratton
73f6fb9fe7 Merge branch 'feature/spi_functions_in_iram' into 'master'
feature(spi_master): allow to place functions into IRAM to get higher efficiency

See merge request idf/esp-idf!2538
2018-06-19 07:25:12 +08:00
houchenyao
339d381019 test: components/driver: ledc case 2018-06-19 02:00:42 +08:00
Michael (XIAO Xufeng)
9c23b8e596 feature(spi_master): allow to place functions into IRAM to get higher efficiency 2018-06-14 20:22:40 +08:00
Ivan Grokhotkov
589e8db4dd Merge branch 'bugfix/spi_gpio_deinit' into 'master'
fix(spi): Fix several init/deinit issues of spi pins

See merge request idf/esp-idf!2522
2018-06-14 19:21:34 +08:00
michael
9b1f2df900 fix(sdio_slave): fix the intr_recv issue that trigger receiving too fast cause assertion failed.
also fix a race risk issue when recycle receiving buffers.
2018-06-14 12:04:23 +08:00
michael
5b37a96ddc feature(sdio): allow to enable internal pullups of the SDIO host and slave as a debug feature
NOTE: the internal pullups are not totally reliable, please do add external pullups on your bus.
2018-06-14 12:04:22 +08:00
michael
45d1c9207c bugfix(spi): resolve the glitch that happens during initialization 2018-06-14 11:29:16 +08:00
Michael (XIAO Xufeng)
77077196fd fix(spi): reset gpios that used by spi when deinited 2018-06-14 11:29:15 +08:00
Michael (XIAO Xufeng)
ebfda40b7c refactor(spi): move pin information into soc folder 2018-06-14 11:29:15 +08:00
He Yin Ling
e1a6e71486 Merge branch 'test/driver_rmt' into 'master'
test: add rmt test cases

See merge request idf/esp-idf!1797
2018-06-13 22:31:11 +08:00
He Yin Ling
a4581ff404 Merge branch 'test/driver_timer' into 'master'
test: add driver timer test cases

See merge request idf/esp-idf!1785
2018-06-13 22:28:17 +08:00
houchenyao
5c6473245f test: add driver/rmt test case 2018-06-13 18:10:09 +08:00
He Yin Ling
17200f484e Merge branch 'test/driver_sigmadelta' into 'master'
test: add sigmadelta test

See merge request idf/esp-idf!1780
2018-06-13 15:19:35 +08:00
houchenyao
de848a5150 test: driver/sigmadelta test case 2018-06-13 10:15:06 +08:00
houchenyao
0837eb4c2e test: components/driver: timer case 2018-06-13 01:39:07 +00:00
houchenyao
e5717e365f test: add driver/gpio test case 2018-06-12 19:04:30 +08:00
Mahavir Jain
eef8d0f7ed Resolve required include header dependencies in component itself
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-12 11:19:39 +05:30
Angus Gratton
87077a5478 test: Tweaks to reduce variation in CI unit tests
spi test: Prime the flash cache before each test to minimise flash cache misses.

VFS performance test: Increase the number of runs to minimise influence of an isolated bad run.
2018-06-08 14:42:44 +10:00
Michael (XIAO Xufeng)
939e5693a5 chore(spi): fix the terms of native to iomux 2018-06-06 06:08:39 +00:00
michael
75cdbcefc7 test(spi): add test for SPI timing 2018-06-06 06:08:39 +00:00
michael
208d993de1 test(spi_master): slightly modify the test 2018-06-06 06:08:39 +00:00
michael
5cf7d3768d feat(spi_master): fine tune the timing of SPI 2018-06-06 06:08:39 +00:00
Angus Gratton
6b9784cc45 Merge branch 'master' into feature/cmake_update 2018-05-31 14:46:23 +10:00
Angus Gratton
c9f8470fdf Merge branch 'feature/rmt_translator' into 'master'
driver(rmt): Add API supports sending uint8_t type data

See merge request idf/esp-idf!1975
2018-05-23 07:27:14 +08:00
Angus Gratton
75c27202f7 Merge branch 'feature/update_touchpad_filter_process' into 'master'
driver(touchpad): Change the measuring mode, improve the software filter.

See merge request idf/esp-idf!2358
2018-05-22 09:56:55 +08:00
kooho
5bc8ae3b3a driver(rmt):Add API supports sending uint8_t type data. 2018-05-22 01:55:44 +00:00
michael
f613859e29 feat(sdio_slave): add new driver for sdio_slave 2018-05-21 23:48:47 +08:00
Angus Gratton
0c64ef9600 Merge branch 'bugfix/sdio_write_unaligned_len' into 'master'
SDIO: allow read/write operations for lengths not divisible by 4

See merge request idf/esp-idf!2278
2018-05-21 15:26:32 +08:00
Wangjialin
09181b7d94 driver(touchpad): improve touchpad filter mode and update examples. 2018-05-21 14:45:31 +08:00
Jiang Jiang Jian
35d148256b Merge branch 'bugfix/fix_uart_buffer_full_flg_error_bug' into 'master'
driver(uart): Fix the bug that uart buffer_full flag is true all the time.

See merge request idf/esp-idf!2418
2018-05-21 14:09:44 +08:00
Jiang Jiang Jian
9c53b599b2 Merge branch 'bugfix/i2c_add_xqueue_static_allocation' into 'master'
driver(i2c, rmt):  Add xQueue and xSemaphore static allocation support when intr_alloc_flag set to ESP_INTR_FLAG_IRAM.

See merge request idf/esp-idf!2335
2018-05-21 10:29:31 +08:00
Angus Gratton
03414b1f39 Merge branch 'bugfix/reset_some_peripherals_when_cpu_start' into 'master'
driver:   Reset  communication peripherals when cpu start up.

See merge request idf/esp-idf!2296
2018-05-21 09:53:42 +08:00
kooho
f6f9f93a9d driver(i2c, rmt):Add intr_flag setting to ESP_INTR_FLAG_IRAM support when enable psram. 2018-05-21 09:37:56 +08:00
wangmengyang
22e21b38f7 component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
kooho
33b99caf50 driver(uart):Fix the bug that uart buffer_full flag is true all the time. 2018-05-18 16:46:10 +08:00
kooho
ef39c09bc1 driver: reset communication peripherals when the cpu starts. 2018-05-18 14:41:58 +08:00
Roland Dobai
18e83bcd53 Allow VFS file descriptors in select() 2018-05-18 08:06:33 +02:00
Jiang Jiang Jian
cf9499479c Merge branch 'bugfix/i2s_mix_result_with_error_code_master' into 'master'
fix i2s mix result and error code

See merge request idf/esp-idf!2227
2018-05-17 21:53:06 +08:00
Jiang Jiang Jian
8c657dfee4 Merge branch 'bugfix/fix_an_error_in_comment_of_uart_driver' into 'master'
deiver(uart):revise the explanation of uart break length

See merge request idf/esp-idf!2398
2018-05-17 17:17:14 +08:00
Jiang Jiang Jian
993b8b7bf6 Merge branch 'bugfix/o3_fails' into 'master'
Fix compilation errors when -O3 is used

See merge request idf/esp-idf!2396
2018-05-17 16:48:13 +08:00
Zhang Zhao Xiang
9deb58859c fix i2s mix result and error code 2018-05-17 10:59:04 +08:00
Angus Gratton
b2e264ef52 Merge branch 'feature/ledc_add_api_set_hpoint_val' into 'master'
driver(ledc): fix duty and fade issues and add thread-safe version APIs.

See merge request idf/esp-idf!2233
2018-05-16 19:52:26 +08:00
Jiang Jiang Jian
4b4a587540 Merge branch 'bugfix/touch_change_default_enable_value' into 'master'
bugfix(touch): change the default value for sar_touch_enable register.

See merge request idf/esp-idf!1870
2018-05-16 17:40:18 +08:00
Angus Gratton
fcd5d0869d Merge branch 'bugfix/spi_native_pins' into 'master'
fix several spi issues about pin configurations

See merge request idf/esp-idf!2309
2018-05-15 14:19:20 +08:00
Angus Gratton
31d53bc059 Merge branch 'bugfix/sdspi_delayed_write_response' into 'master'
sdspi: handle delayed response to data write command

See merge request idf/esp-idf!2290
2018-05-15 10:32:21 +08:00
Jiang Jiang Jian
73d20981de Merge branch 'bugfix/rmt_tx_stop_bug' into 'master'
driver(rmt):  RMT tx stop  workaround

See merge request idf/esp-idf!1915
2018-05-15 10:04:33 +08:00
Jiang Jiang Jian
33b11c6f6a Merge branch 'feature/adjust_log_level_about_uart' into 'master'
feat: Adjust log level about UART

See merge request idf/esp-idf!2047
2018-05-15 09:59:21 +08:00
Ivan Grokhotkov
9379d7b9f9 sdmmc: wait for command done event even if data transfer is over
This fixes errors logged on the console: sdmmc_req:
handle_idle_state_events unhandled: 00000004 00000000

The issue happens if "data done" event occurs before "command done".
State machine code did not check *which* event occurred in
SENDING_CMD state, and went to IDLE or SENDING_DATA state on any
non-error event. In this case, we can't process "data done" event
until command has completed. This change introduces "unhandled event"
mask, which is carried over from one run of process_events to the
other. This allows waiting for the "command done" event to complete,
and then process "data done" event.

Ref TW17126.
2018-05-15 09:59:20 +08:00
Ivan Grokhotkov
cf81db40a2 sdio: allow reads/writes with lengths not divisible by 4
CMD53 in byte mode supports transfers of any number of bytes between 1
and 512. This change removes limitation that the number of bytes must
be divisible by 4. Host quirk, that such transfers must be split into
two commands (one for the aligned part and the other one for
unaligned) is taken into account.
2018-05-15 09:59:20 +08:00
chenjianqiang
b5de860bcb revise the explain of a parameter(brk_len) in uart driver file 2018-05-14 19:47:16 +08:00
kooho
a8d26d7e4d driver(rmt):Fix rmt_tx_stop bug. 2018-05-14 19:46:30 +08:00
Roland Dobai
ca08397b6b Fix compilation errors when -O3 is used
Closes https://github.com/espressif/esp-idf/issues/718
2018-05-14 12:29:57 +02:00
jack
c384fa2492 rename clock enable and reset bits for SPI modules
1.The names of clock enable and reset bits do not match with TRM, just rename them.
2018-05-14 16:45:03 +08:00
kooho
1bebec05c6 driver(ledc): fix duty and fade issues and add thread-safe version APIs.
1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914
2. Fix the duty overflow issue when duty_scale is set to 1.
3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit.
4. Add thread-safe version APIs to set duty and fade.
5. Correct the duty range in driver.
2018-05-14 12:27:21 +08:00
Angus Gratton
e23ee9fa73 Merge branch 'bugfix/ledc_error' into 'master'
ledc driver: Clarify logging of function argument errors

See merge request idf/esp-idf!2380
2018-05-14 09:16:02 +08:00
Angus Gratton
64c52022b9 Merge branch 'bugfix/add_comments_for_adc' into 'master'
driver(adc): Add descriptions that starting ADC can trigger interrupt of GPIO36…

See merge request idf/esp-idf!1910
2018-05-11 18:54:40 +08:00
kooho
d53661a663 driver(adc): add descriptions for the issue that starting ADC can trigger interrupt of GPIO36 and GPIO39. 2018-05-11 17:08:58 +08:00
Mahavir Jain
b2a1a79eb4 i2s: fix issue in dma descriptor allocation if SPIRAM is enabled
It has been observed that, if external SPIRAM is enabled, then under
certain scenarios (e.g. internal memory being too much fragmented),
I2S tx/rx descriptors can land in external SPIRAM and hence resulting
in failure in DMA. Adding explicit capability to allocate in only DMA
capable memory.

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-05-10 18:26:01 +05:30
Angus Gratton
feb64c3be6 ledc driver: Clarify logging of function argument errors
Some parameter errors did not specify which parameter was invalid.

Adds a new macro to name the invalid param.
2018-05-10 17:21:35 +08:00
Ivan Grokhotkov
a2556229aa Merge branch 'bugfix/uart_fix_get_baudrate_error_bug' into 'master'
driver(uart):   Fix uart_get_baudrate incorrect return value when using ref_tick

See merge request idf/esp-idf!2295
2018-05-08 20:25:13 +08:00
michael
197f594b06 fix(spi): fix the issue when bus flag not set, dual mode cannot be used. 2018-05-08 15:47:26 +08:00
michael
28beafc624 fix(spi): fix the issue that native pins don't work after SPI initialized before 2018-05-08 15:47:25 +08:00
Michael (XIAO Xufeng)
1f085b1a3b feat(gpio): add function allowing switching input source from GPIO back to IOMUX 2018-05-08 15:47:25 +08:00
Angus Gratton
b90ad81f22 driver: Add notes to SPI driver docs about thread safety 2018-05-07 09:03:48 +08:00
kooho
0dca2d4c68 driver(uart): Fix uart_get_baudrate incorrect return value when using ref_tick 2018-05-04 09:41:41 +08:00
Angus Gratton
1cb5712463 cmake: Add component dependency support
Components should set the COMPONENT_REQUIRES & COMPONENT_PRIVATE_REQUIRES variables to define their
requirements.
2018-04-30 09:59:20 +10:00
Angus Gratton
4f1a856dbf cmake: Remove defaults for COMPONENT_SRCDIRS, COMPONENT_SRCS, COMPONENT_ADD_INCLUDEDIRS
* Philosophical: "explicit is better than implicit".
* Practical: Allows useful errors if invalid directories given in components as the defaults aren't
  always used. Also trims the -I path from a number of components that have no actual include
  directory.
* Simplifies knowing which components will be header-only and which won't
2018-04-30 09:59:20 +10:00
Angus Gratton
c671a0c3eb build system: Initial cmake support, work in progress 2018-04-30 09:59:20 +10:00
Liu Zhi Fu
ed46976f41 esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine
Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-04-27 15:02:30 +08:00
Ivan Grokhotkov
2699bb49ae sdspi: handle delayed responses for data write commands
Command response tokens can be delayed from the original command by 1
to 8 bytes. In 4a2489b9, handling for delayed tokens was added for
normal (no data) commands, and data read commands. This adds handling
for delayed commands for data write commands.
2018-04-26 10:04:44 +08:00
Ivan Grokhotkov
52f9a5ca16 Merge branch 'bugfix/sdspi_wp_cd_pins' into 'master'
sdmmc, sdspi: fix handling of CD and WP

See merge request idf/esp-idf!2285
2018-04-24 20:53:47 +08:00
Ivan Grokhotkov
85ab4fc83e sdmmc host: add handling of CD and WP pins
Previous version of the code only connected CD and WP to the
peripheral, in fact the hardware does not use the values of these
signals automatically. This adds code to read CD and WP values when
command is executed and return errors if card is not present, or
write command is executed when WP signal is active.
2018-04-24 19:08:44 +08:00
Ivan Grokhotkov
829c6cef39 sdmmc host: when parameter validation fails, exit cleanly
This fixes lock-up which happened when sending a command, if the
previous command has failed.
2018-04-24 19:08:44 +08:00
Ivan Grokhotkov
92a16ac6e6 sdspi: fix CD and WP incorrectly configured as outputs 2018-04-23 14:35:40 +08:00
Ivan Grokhotkov
2a7d85cfa4 sdmmc, sdspi: fix initializers to be C++-compatible, add test
Closes https://github.com/espressif/esp-idf/issues/1861
Closes https://github.com/espressif/arduino-esp32/issues/1312
2018-04-23 14:35:13 +08:00
Flavio Bayer
d477d3c5bd bugfix/sdspi_host.c: wrong CD/WP pin configuration
Looks like the configuration of CP and WP pins are wrong, since the check for `gpio_cd` and `gpio_wp` in `slot_config` seems to be swapped.
2018-04-23 11:32:42 +10:00
Ivan Grokhotkov
22fbcd276c Merge branch 'feature/amazon_freertos_compat_v2' into 'master'
Changes for Amazon Freertos compatibility

See merge request idf/esp-idf!2123
2018-04-20 14:55:47 +08:00
Ivan Grokhotkov
6185e722c3 Revert "Merge branch 'feature/vfs_select' into 'master'"
This reverts merge request !2074
2018-04-20 11:51:41 +08:00
Mahavir Jain
43a12894ea driver/spi: add _ISR counterparts if invoked from interrupt for critical section
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-04-19 18:28:55 +05:30
Ivan Grokhotkov
88d0d6ffb0 Merge branch 'feature/vfs_select' into 'master'
Allow VFS file descriptors in select()

See merge request idf/esp-idf!2074
2018-04-19 15:06:02 +08:00
Ivan Grokhotkov
b297b72abb Merge branch 'bugfix/fix_gpio_install_isr_service_check_value' into 'master'
driver(gpio): modify return value when gpio ISR service already exists.

See merge request idf/esp-idf!2125
2018-04-19 15:01:50 +08:00
Roland Dobai
6852d653bd Allow VFS file descriptors in select() 2018-04-17 11:25:30 +02:00
Mahavir Jain
959c677025 rtc_module: fix build failure if assertions are disabled
Closes https://github.com/espressif/esp-idf/issues/1841

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-04-17 10:44:48 +05:30
Ivan Grokhotkov
d3fd00c049 Merge branch 'bugfix/spi_miso_on_input_only_pins' into 'master'
fix(spi): allow to use MISO on GPIO34-39.

See merge request idf/esp-idf!2136
2018-04-16 14:39:02 +08:00
Angus Gratton
8b3fda99f5 Merge branch 'feature/uart_add_api_get_cmd_position' into 'master'
driver(uart): Add API to get the position of cmd_char

See merge request idf/esp-idf!2177
2018-04-16 08:03:25 +08:00
Wang Jia Lin
6c44fc70bc Merge branch 'feature/gpio_add_hold_support' into 'master'
driver(gpio):   Add api support digital pad hold function

See merge request idf/esp-idf!2186
2018-04-13 12:18:44 +08:00
Michael (Xiao Xufeng)
45f8bcf3f8 fix(spi): allow using MISO on GPIO34-39
Breaking Changes: arguments of ``spicommon_bus_initialize_io`` are changed.

Closes https://github.com/espressif/esp-idf/issues/1736.
2018-04-12 17:01:38 +08:00
Michael (Xiao Xufeng)
77629129c0 chore(spi): update the return value of spi init functions 2018-04-12 17:01:38 +08:00
Michael (Xiao Xufeng)
dceb3452c7 doc(spi_master): format the documentation of several fields and macros in spi_master.h 2018-04-12 17:01:37 +08:00
kooho
2236249555 driver(pcnt): Add some APIs to support each unit can have it's own interrupt handler. 2018-04-11 16:15:09 +08:00
Ivan Grokhotkov
c6829fa5b8 sdmmc: improve error handling during SPI mode init
- In SPI mode, the card will respond to the initial SDIO reset (done
using CMD52) with “invalid command” error. Handle this correctly.

- sdmmc_card_init had a hack where GO_IDLE_STATE (CMD0) command was
sent twice. Add explanation why this is done, and don’t expect
correct response from the card on first CMD0.

- improve logs printed at debug level by adding CMD index
2018-04-11 11:11:17 +08:00
Ivan Grokhotkov
ee600784c5 sdmmc: add SDIO support
- Add SDIO support at protocol layer (probing, data transfer, interrupts)
- Add SDIO interrupts support in SDMMC host
- Add test (communicate with ESP32 in SDIO download mode)
2018-04-11 11:07:13 +08:00
Ivan Grokhotkov
5f97e6bebb sdmmc: fill as many DMA descriptors as possible 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
20a8c3318a sdmmc: do expect CMD_DONE interrupt after response timeout
Existing code assumed that response timeout is not followed by CMD_DONE,
which was not true, in fact. Host datasheet states that CMD_DONE is sent
after an RTO.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
01cd2fce73 sdmmc: print error status only once 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
5fc6fb58ea sdmmc: don't whitelist the opcodes when handling response timeout
All the commands which do not have a response must have their flags set
accordingly. Therefore the host will not send RTO interrupt if response
is not expected. It is a bug in the code logic if it happens otherwise.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
f02cff13cc sdmmc: set highest possible host clock divider
SDMMC host suffers from an issue that it outputs data near the rising
edge of the card clock, which is the edge used by the card to sample
data. If sampling time constraint is not satisfied, card may read data
after the transition.

The phases of output/input data can, in fact, be adjusted. However this
adjustment happens in the clock generation block outside of the host.
So the maximum phase change which can be created this way is equal to
half of the host clock period. So if the host clock is set to the lowest
possible frequency (for the given card frequency), then the phase offset
(and hence the hold time) will be the highest. This change modifies the
logic used to determine clock dividers accordingly.

sdmmc host: set correct dout phase and print correct frequency
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
84d6793f77 sdmmc: don't set data_expected on SET_BUS_WIDTH command
SET_BUS_WIDTH is not a data transfer command. Extensive search in the
host datasheet and SD card spec did not reveal the origin of this hack
or 'feature'. Further testing showed that removing this does not lead to
regressions.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
42de5fb76d sdmmc: send init sequence before CMD0 2018-04-11 11:06:50 +08:00
kooho
ccf09c3b39 driver(gpio): Add api support digital pad hold function. 2018-04-10 11:31:59 +08:00
Ing. Jaroslav Šafka
3d89c8ba74 rmt: Fix LoadProhibited on RX END
Fixes exceptions LoadProhibited, when rmt tries read variable p_rmt on RX END which can be 0.
It happens after esp_reset()  (OTA) and the rmt is not probably stopped by it.
In other words the routine rmt_driver_isr_default was called before second rx channel was registered.

scenario:
register tx channel
register rx channel
reboot
register tx channel
-> exception (because rx channel is accessed)

Merges https://github.com/espressif/esp-idf/pull/1671
2018-04-09 12:29:05 +10:00
Angus Gratton
53234ef2bc Merge branch 'refactor/rtc_split_module' into 'master'
bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.

See merge request idf/esp-idf!1848
2018-04-04 09:00:58 +08:00
kooho
305c788c60 driver(uart): Add API to get the position of cmd_char 2018-04-03 12:34:16 +08:00
Ivan Grokhotkov
4a2489b99a sdspi: fix compatibility issue in multi block read
SDSPI driver optimized polling of the response tokens by requesting
two extra bytes on top of the block size (512) and CRC (2), and
checking whether these bytes contained the data response token or
not. In case the token was there, further polling would not need to
happen, thereby reducing latency between two consecutive blocks
transferred. However this caused compatibility issues when these two
extra bytes were sent after reading the final block. When
STOP_TRANSMISSION command was sent, these extra two bytes were
treated as part of the command, causing an invalid command error.

This fixes the logic by only requesting extra two bytes if the block
being read is not the final block. In addition to that, more strict
error checking is implemented for command response tokens.
2018-03-30 18:49:42 +08:00
Ivan Grokhotkov
229f67b816 sdspi: handle delayed R1 responses for data read commands 2018-03-30 18:49:42 +08:00
Ivan Grokhotkov
bbbdec24d9 sdspi: handle error flags for R3/R7 responses
Previously error flags were only handled for R1 responses. This change
moves error handling into a separate function and calls it for R1/R3/R7.
2018-03-30 18:49:42 +08:00
Jiang Jiang Jian
8b9f237cb9 Merge branch 'feature/i2s_add_expand_function' into 'master'
add a new i2s feature to expand the original i2s width

See merge request idf/esp-idf!1617
2018-03-30 14:51:23 +08:00
kooho
8e1f930582 driver(gpio): Modified the GPIO_CHECK's return value when ISR service already installed 2018-03-29 09:58:31 +08:00
Ivan Grokhotkov
1a157279e0 Merge branch 'doc/adc1_channel_config' into 'master'
adc: Add doc details about configure not needed before each read

See merge request idf/esp-idf!2132
2018-03-28 19:11:44 +08:00
Michael (Xiao Xufeng)
cef8baf424 bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.
refactor structure of ``rtc_module.c`` to make it more clearly.

Closes https://github.com/espressif/esp-idf/issues/1517
2018-03-28 17:10:01 +08:00