Commit Graph

1429 Commits

Author SHA1 Message Date
Deomid Ryabkov
20fd57f147 Add backtrace to exception output.
On Xtensa windowed ABI backtrace is easy to do, and it's immensely
useful for debugging, so - do it by default.
We try to be careful and not deref bogus pointers while walking the
frames.

Example output (from debugging espressif/esp-idf#133):

Backtrace: 0x1:0x3ffc51e0 0x400e9dfa:0x3ffc5210 0x400e9ebc:0x3ffc5230 0x400ec487:0x3ffc5260

With just addr2line utility from binutils, this already pinpoints the
location of the crash.
2016-12-07 19:58:06 +00:00
Ivan Grokhotkov
13d802262a cpu_start: disable boot watchdog only after starting the main task
Boot watchdogs were disabled very early in startup code. It was possible to introduce an infinite loop anywhere in the many functions called from startup code, and this would not be detected by interrupt watchdog and task watchdog. This change postpones disabling of boot watchdogs to the point when the scheduler is running. Also replaces register expressed using integer address with a name.
2016-12-08 01:42:37 +08:00
Ivan Grokhotkov
b57aecdfe9 uart_tx_wait_idle: fix issue with last character not transmitted
- ROM function uart_tx_wait_idle may have a bug which causes the function to return before the final character is fully transmitted.
  This replaces uart_tx_wait_idle declaration with a static inline definition which fixes the issue.
- Also replaces the use of uart_tx_flush with uart_tx_wait_idle in esp_restart, to remove garbage in console output on restart.
- rtc_printf is temporary replaced with a no-op, pending a new release of librtc.a. Current release assumes that UART0 is used for output,
  and switches UART0 baud rate while doing frequency changes and printing some log output. This doesn’t work if a different UART is used for output.
2016-12-08 01:42:37 +08:00
Ivan Grokhotkov
b3f6cd08db support for console redirection to other UART
This change adds a set of menuconfig options to set custom UART#, baud rate, and pins, for console output.
Setting happens in bootloader startup code for PRO CPU, and in application startup code for APP CPU.
Ref. TW8146
2016-12-08 01:42:37 +08:00
Deomid Ryabkov
ce8b52617e Zero-fill netif on alloc
Fixes espressif/esp-idf#133
2016-12-07 14:32:29 +00:00
Ivan Grokhotkov
6dc77bc55c Merge branch 'driver_merge_tmp/merge_rtc_module' into 'master'
Driver: add rtc module

1. add rtc io control API (pull,output and input)
2. add touch pad API (touch pad read and interrupt)
3. add adc1 API (the max width is 12 Bits and support attenuation)
4. add hall sensor API (support hall sensor read )
5. add dac API (the width is 8 Bits)

See merge request !243
2016-12-07 17:03:33 +08:00
Chu Shu Chen
b1db2721dc driver: add rtc module and bugfix gpio32 gpio33
feature(rtc_module):add rtc module

1. add rtc io control API (pull,output and input)
2. add touch pad API (touch pad read and interrupt)
3. add adc1 API (the max width is 12 Bits and support attenuation)
4. add hall sensor API (support hall sensor read )
5. add dac API (the width is 8 Bits)

bugfix(gpio):gpio32 and gpio33 can not output and input

the gpio32 and gpio33 is initialize by librtc.a,and gpio_config not initialize the gpio as
digital gpio.they can not output and input,when users use gpio32 or gpio33.And there are some problems
about others driver ,when they use gpio32 or gpio33 as  matrix.
2016-12-07 15:56:13 +08:00
Ivan Grokhotkov
0dff9ed79d drivers: remove file paths from log statements
Function name and error string are usually sufficient to find the place which has triggered an error. __FILE__ macro generates a string which has absolute file name (with our build system), so there is a lot of long strings present in the program because of that.

Fixes https://github.com/espressif/esp-idf/issues/126
2016-12-07 12:01:54 +08:00
Ivan Grokhotkov
60d7440781 Merge branch 'feature/debugging_fixes' into 'master'
Small debugging fixes

Invoke panic handler when a stack overflow has been detected; unhandled interrupt handler now prints interrupt/cpu number for easier pinning down of source.

See merge request !277
2016-12-07 10:30:17 +08:00
Ivan Grokhotkov
a35e4f5923 Merge branch 'feature/unit_test_app_tweaks' into 'master'
unit-test-app: Don't auto-display menu after test run finishes

Previous code would sometimes display menu multiple times, depending on UART activity.

See merge request !253
2016-12-07 10:28:19 +08:00
Angus Gratton
69df54a28c unit-test-app: Don't auto-display menu after test run finishes
Previous code sometimes menu multiple times, depending on UART activity.
2016-12-06 11:25:31 -08:00
Angus Gratton
9a774848d4 Merge branch 'bugfix/gdbstub_no_sync_gdb' into 'master'
Gdbstub: Fix bug, small cleanup

Tianzhongxing found a small bug preventing gdbstub to work in certain cases. This fixes it, as well as including some minor cleanups.

See merge request !260
2016-12-07 03:20:07 +08:00
Angus Gratton
1613c180e0 CI build_examples.sh: Fail on warnings, even with -Wno-error 2016-12-06 10:39:56 -08:00
Yinling
a241197067 handle the case that artifacts do not exist 2016-12-06 19:01:20 +08:00
Yinling
ec40053720 add supported stress test cases to CI 2016-12-06 15:41:02 +08:00
me-no-dev
3cd9cb8911 Fix comment in the header 2016-12-06 02:10:35 +02:00
me-no-dev
2dbae95a7e Fix wrong assignment of channel and unit in pcnt_unit_config 2016-12-06 01:11:32 +02:00
Jeroen Domburg
c852e9958b Invoke panic handler when a stack overflow has been detected; unhandled interrupt now prints interrupt/cpu number. 2016-12-05 20:37:59 +08:00
Ivan Grokhotkov
c8685c2002 Merge branch 'feature/ulp' into 'master'
Initial support for generation of ULP coprocessor code

This adds basic support for writing ULP coprocessor programs using an assembly-like syntax, with integer labels and branches to labels.

See merge request !261
2016-12-02 22:45:47 +08:00
Wu Jian Gang
65f57e5da7 Merge branch 'bugfix/tw6904_mode_switch_cause_exception' into 'master'
esp32: fix tw6901

1. tw6904 - esp32 mode switch cause exception
2. tw8881 - set mac cause exception
3. Make pm_open/pm_shutdown thread-safe

See merge request !271
2016-12-02 18:44:43 +08:00
Liu Zhi Fu
5f47b85b87 freertos: default run program on 1st cpu
Modify the default cpu-mode to single cpu mode and always run the program on the 1st core
2016-12-02 18:17:57 +08:00
Jeroen Domburg
004aadfe70 Fix small bug in gdbstub where it sometimes would not return a valid stop reason, timing out gdb. Also clean up the code a bit. 2016-12-02 17:42:11 +08:00
Liu Zhi Fu
9423390c2e esp32: fix tw6901
1. tw6904 - esp32 mode switch cause exception
2. tw8881 - set mac cause exception
3. Make pm_open/pm_shutdown thread-safe
2016-12-02 17:35:49 +08:00
Wu Jian Gang
f394632319 Merge branch 'bugfix/example_index' into 'master'
fix example index

Fix duplicate index 14 example and the index in some rst files.

See merge request !270
2016-12-02 17:31:05 +08:00
Wu Jian Gang
667d0ef319 docs: fix example index 2016-12-02 16:02:20 +08:00
Angus Gratton
ceb8566970 Flash encryption / secure boot: Temporarily disable on-device key generation
Will be enabled after seeding of HWRNG in bootloader is fully tested/qualified.
2016-12-01 23:49:13 -08:00
Angus Gratton
f62b83fb77 secure boot docs: Add some examples of using espsecure.py standalone 2016-12-01 23:49:12 -08:00
Angus Gratton
822ed84225 docs: Correct partition table offset 2016-12-01 23:49:12 -08:00
Angus Gratton
a9d5e26748 Secure boot: Correctly re-sign if signing key changes, better error if missing 2016-12-01 23:49:12 -08:00
Angus Gratton
506c8cd964 secure boot & flash encryption: Rework configuration options
Add UART bootloader disable options for flash encryption
2016-12-01 23:49:12 -08:00
Angus Gratton
9eb135fd73 Flash encryption: Support enabling flash encryption in bootloader, app support
* App access functions are all flash encryption-aware
* Documentation for flash encryption
* Partition read/write is flash aware
* New encrypted write function
2016-12-01 23:49:12 -08:00
Ivan Grokhotkov
ab3677d64c initial support for generation of ULP coprocessor code 2016-12-01 20:26:47 -08:00
Jiang Jiang Jian
bd20288b81 Merge branch 'feature/btdm_bluedroid' into 'master'
Feature/btdm bluedroid

This branch contain the bluedroid host code.
Currently,  Only GAP/GATT SERVER/GATT CLIENT release to users.
Actually, the content of the codes is further more than GAP/GATT and etc.
In this release version, users only need to concern about the APIs which are in "api/include/".

Now, suggestions in comment have been resolved are following:
1. The APIs use callback function. Ivan , Jeroen and me have discussed it. Currently the code will not be changed.
2. The APIs use OPEN/CLOSE. I have ask Ivan, besides bluedroid do this, we will keep the name.
3. Coding style. I have run format.sh to handle the style. And some spell error have been fixed.
4. APIs doxygen. I have clean the warning by doxygen. But bt.rst is still need to be completed.
5. Other comment without resolved face to face that I have to add response in the comment and fix them in the code
6. Fix some incorrect things. See the git log for details.

This 1st version of bluedroid release still have lots of things to do. But it can be done after this merge.
1. Compelete the BLUFI(Bluetooth config wifi connection) documents, security, application protocol and other.
2. Add SPP-LIKE profile.
3. Do more examples codes to cover most of the APIs.
4. Test and fix bug.

Another thing:
1. Do the document of APIs.(xml->bt.rst->html) 
(I will do this before merge as Ivan's suggestion)
This is already done. Besides, the union type in doxygen have something error. Ivan will fix it.



See merge request !239
2016-12-02 12:07:20 +08:00
Tian Hao
d925b96daf component/bt : cleanup the function warning in doxygen 2016-12-01 20:55:08 +08:00
Tian Hao
df419fd862 component/bt : doxygen can generate html correctly 2016-12-01 20:20:22 +08:00
Tian Hao
954ffa102f component/bt : add ble event type 2016-12-01 20:16:09 +08:00
Tian Hao
bdf4006da7 component/bt : cleanup the return style 2016-12-01 19:58:52 +08:00
Wu Jian Gang
5c1928b14d Merge branch 'feature/ethernet_driver' into 'master'
Feature/ethernet driver

Add ethernet driver

See merge request !235
2016-12-01 19:46:07 +08:00
shangke
e0040af7e5 ethernet: add first version of ethernet driver 2016-12-01 19:17:48 +08:00
Tian Hao
c6ec70b67b component/bt : cleanup the function comment as doxygen type 2016-12-01 18:58:54 +08:00
Wu Jian Gang
c110795718 Merge branch 'feature/tcpip_get_hostname' into 'master'
tcpip_adapter: teamwork 8964

add get netif host name feature

See merge request !264
2016-12-01 16:51:40 +08:00
Wu Jian Gang
099e3030bf Merge branch 'bugfix/init_factory_bin' into 'master'
bugfix/init_factory_bin: fix inconsistency between bootloader and OTA code

init_factory_bin: 2nd bootloader use a wrong logic select factory  image to boot,and some bug in OTA code 

See merge request !266
2016-12-01 16:14:42 +08:00
Wu Jian Gang
60ac08115f Merge branch 'bugfix/ota_doc_error' into 'master'
bugfix/ota_doc_error: fix return error of ota docs

fix doc return error of ota api 

See merge request !265
2016-12-01 16:10:06 +08:00
Wu Jian Gang
6ff431d464 Merge branch 'feature/add_check_sleep' into 'master'
Feature/add check sleep

 esp32/lwip: add check sleep

1. fix tw8911 sleep in scan leads to auth frame malloc fail.

2. fix tw8913 pm state transfer wrong leads to wdt.

3. make some comments for modem sleep and wpa2 enterprise.

4. removd duplicated debug option ESP_THREAD_SAFE_DEBUG

See merge request !267
2016-12-01 16:06:05 +08:00
tzx
9b2cad4174 docs: fix return error of ota docs and fix ota.rst 2016-12-01 13:54:25 +08:00
tzx
2092d14e45 app_update: fix inconsistency between bootloader and OTA code 2016-12-01 13:46:02 +08:00
Xia Xiaotian
ad555d68d3 esp32/lwip: add check sleep
1. fix tw8911 sleep in scan leads to auth frame malloc fail.

2. fix tw8913 pm state transfer wrong leads to wdt.

3. make some comments for modem sleep and wpa2 enterprise.

4. removd duplicated debug option ESP_THREAD_SAFE_DEBUG
2016-12-01 13:34:36 +08:00
Tian Hao
281a9c2761 component/bt : fix a code bug 2016-12-01 12:14:57 +08:00
Tian Hao
1abf2c4ed7 component/bt : update lib 2016-12-01 12:05:42 +08:00
Tian Hao
ba96c0d2e9 Merge branch 'master' of ssh://gitlab.espressif.cn:27227/idf/esp-idf into feature/btdm_bluedroid 2016-11-30 19:08:40 +08:00