morris
16677b0d3c
global: make periph enable/disable APIs private
...
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
2021-11-08 10:37:47 +08:00
wuzhenghui
5000aa877f
fix rtc_clk_cal: Wait for timeout in a loop instead of just judge once
2021-10-19 12:07:34 +08:00
wuzhenghui
ab9df9945f
fix stuck in rtc_clk_cal
2021-10-14 16:25:54 +08:00
Li Shuai
73829221f5
esp_hw_support: force power down wifi and bt power domain when rtc module init
2021-10-14 10:51:10 +08:00
Martin Vychodil
5344de34c3
System/Memprot: fixed voltage glitching detection logic
...
When the application is being debugged it should check the call result (esp_cpu_in_ocd_debug_mode())
is not given volt.glitch attack - so the result is triple-checked by ESP_FAULT_ASSERT macro. In case
the check fails, the system is reset immediately
IDF-4014
2021-10-04 09:21:07 +02:00
Jiang Jiang Jian
f5ae8b0533
Merge branch 'feature/ledc_use_rtc8m_or_xtal_lightsleep' into 'master'
...
support RTC8M and XTAL power domain in light sleep mode
Closes IDF-3419
See merge request espressif/esp-idf!15152
2021-09-27 04:02:29 +00:00
Wu Zheng Hui
1080e4f6a2
rename APB_CTRL ro SYS_CON
...
save
2021-09-16 20:57:57 +08:00
Li Shuai
b3e27403f3
esp_hw_support: keep external 40 MHz xtal related analog circuit power on during sleep
2021-09-16 14:46:21 +08:00
Li Shuai
58292a7d22
Power Management: add XTAL power domain to control whether external 40MHz xtal is powered down during sleep
2021-09-16 14:43:43 +08:00
Li Shuai
f5b39a7cde
esp_hw_support: No voltage drop during light sleep to ensure stable output clock of rtc8m oscillator
2021-09-16 14:40:46 +08:00
Li Shuai
e44ead5356
Power Management: add RTC8M power domain to control whether internal 8m oscillator is powered down during sleep
2021-09-13 17:36:54 +08:00
Sachin Parekh
fa2707f1f3
hmac: Added Downstream JTAG enable mode for esp32c3 and esp32s3
...
If JTAG is disabled temporarily by burning SOFT_DIS_JTAG, it can be
re-enabled temporarily through esp_hmac_jtag_enable API
2021-09-06 11:06:50 +05:30
Marius Vikhammer
4869b3cd4a
WDT: Add support for XTAL32K Watchdog timer
2021-09-02 09:09:00 +08:00
morris
a861575d05
Merge branch 'bugfix/fix_esp32c3_auto_adjust_volt' into 'master'
...
system: fix esp32c3 auto adjust voltage bug
See merge request espressif/esp-idf!14725
2021-08-26 02:53:22 +00:00
sly
b342b49823
fix esp32c3 auto adjust voltage bug
2021-08-25 17:08:26 +08:00
Jan Brudný
7f50818a99
esp_hw_support: update copyright notice 3
2021-08-10 13:30:57 +02:00
Renz Bagaporo
452bfda367
esp32: move dport_access
2021-07-16 20:14:26 +08:00
Renz Bagaporo
702e41e1c8
esp32s2: move crypto related functions
2021-07-16 20:14:26 +08:00
Renz Bagaporo
ea2aafbb7a
esp32s2: move memprot api
2021-07-16 20:14:26 +08:00
Jiang Jiang Jian
d28417edbc
Merge branch 'bugfix/deep_sleep_rtcwdt_rst_issue' into 'master'
...
clear wakeup and reject int raw signal before entry sleep
Closes FCS-673
See merge request espressif/esp-idf!13982
2021-06-29 13:31:40 +00:00
Li Shuai
6ca207531b
deep sleep: clear wakeup and reject int raw signal before entry sleep
2021-06-29 11:59:54 +08:00
Marius Vikhammer
ee2f8b1a62
build system: always build with -fno-jump-tables & -fno-tree-switch-conversion
...
Jump tables placed in flash would cause issue with code that needed to be ran from IRAM.
These optimizations are now always disabled.
2021-06-24 14:54:10 +08:00
Omar Chebib
dd8843fec3
regi2c: add a spinlock for accessing (reg)I2C devices
...
When not compiling bootloader, a spinlock will be used for reading or writing
I2C internal devices/registers.
When compiling for bootloader, no need to use any lock.
2021-05-13 11:55:41 +08:00
Jiang Jiang Jian
3c30e688c4
Merge branch 'feature/support_auto_adjust_voltage_storingInEfuse_openGlitchRst' into 'master'
...
ESP32C3: auto adjust voltage dbias storing in efuse and open glitch reset for ECO3
See merge request espressif/esp-idf!13395
2021-05-13 03:49:59 +00:00
chaijie
eea76d14bb
ESP32C3: auto adjust voltage dbias storing in efuse and open glitch reset for ECO3
...
1. add some efuse api to get rtc & digital voltage
2. set dig_rtc voltage to a fix value storing in efuse no mater which cpu frequency
3. modify hardware code in bootloader to fit all c3 ECO3 version
2021-05-08 17:56:54 +08:00
Li Shuai
344ec80fad
optimize deep sleep current in wifi softap mode
2021-04-28 14:03:02 +00:00
Angus Gratton
7cb83c8787
system doc: Re-structure description of MAC addresses, especially on newer chip targets
...
Includes a note about calculating the Ethernet MAC on platforms with no built-in
Ethernet, and removes documentation for esp_efuse_mac_get_custom() on targets
other than ESP32
2021-04-22 16:08:55 +10:00
Angus Gratton
cef3b26a91
Merge branch 'refactor/move_from_esp_system' into 'master'
...
Movements from esp_system
Closes IDF-2165
See merge request espressif/esp-idf!12695
2021-04-08 10:16:08 +00:00
Angus Gratton
70cab5bd81
Merge branch 'bugfix/ulp_riscv_unintended_wake' into 'master'
...
ulp: unintended wakeup in ulp_riscv
See merge request espressif/esp-idf!12894
2021-04-08 01:52:41 +00:00
Renz Bagaporo
8762bfebde
esp_system: move asysnc memcpy to esp_hw_support
2021-04-07 17:53:37 +08:00
Michael (XIAO Xufeng)
d21ca33e40
Merge branch 'bugfix/fix_bootloader_time_too_long_bug' into 'master'
...
esp32s2/esp32c3: decrease boot up and cpu start up time
See merge request espressif/esp-idf!12725
2021-04-06 06:34:57 +00:00
Angus Gratton
6b57f33858
Merge branch 'refactor/movements_from_target_components' into 'master'
...
Movement from target components 1
See merge request espressif/esp-idf!12482
2021-04-05 02:37:21 +00:00
chaijie
f9de69586b
esp32s2/esp32s3/esp32c3: Decrease bootloader cost time
2021-04-01 06:19:34 +00:00
chaijie
c101fc3e3d
fix c3 hardware bug before ECO3 and optimizate bbpll config:
...
1. deepsleep poweron reset bug in high temperature before ECO3;
2. brownout reset bug before ECO2;
3. bbpll voltage low bug before ECO3;
4. need xpd iph for xtal before ECO3;
2021-03-31 13:08:56 +00:00
Renz Bagaporo
9478298aa4
esp32: move mac target specific configs
2021-03-31 19:17:33 +08:00
Renz Bagaporo
4a08264e7a
esp_system: split esp_system.h header
2021-03-31 19:13:03 +08:00
Renz Bagaporo
a7bac58480
esp32: move system api to esp_system
2021-03-31 19:13:03 +08:00
Renz Bagaporo
3639c2322b
ulp: clear rtc int at initialization
...
Closes https://github.com/espressif/esp-idf/issues/6654
2021-03-31 17:15:55 +08:00
KonstantinKondrashov
aa1338bf23
wdt: Fix timeout and RTC_SLOW_CLK
...
RTC_SLOW_CLK
ESP32: 150kHz
ESP32-S2: 90kHz
ESP32-S3: 150kHz
ESP32-C3: 150kHz
2021-03-19 00:15:18 +08:00
Angus Gratton
70e13752ae
Merge branch 'feature/rtc_time_get' into 'master'
...
rtc: Clean up for S2,S3,C3
Closes IDF-2569
See merge request espressif/esp-idf!12336
2021-03-05 01:16:15 +00:00
Angus Gratton
d6f4d99d93
core system: Fix warnings in compilation when assertions are disabled
...
Adds a CI config for hello world that sets this, to catch future regressions
2021-03-03 10:26:57 +11:00
KonstantinKondrashov
b31bf01484
rtc: Clean up for S2,S3,C3
2021-03-01 16:51:15 +08:00
Xia Xiaotian
b71481093a
esp_wifi: fix some Wi-Fi scan and coexist bugs
...
1. Fix the bug that Wi-Fi performance is impacted by BLE starting scan for a while in some scenarios on ESP32-C3.
2. Fix the bug that Wi-Fi performance is impacted when Bluetooth change state for a while in some scenarios on ESP32-C3.
3. Fix the bug that BLE performance is impacted by Wi-Fi scan on ESP32-C3.
4. Fix the bug that Wi-Fi scan fails when BLE is scanning on ESP32-C3.
5. Fix Wi-Fi ACK and CTS rate when low rate is disabled on ESP32-C3.
2021-02-08 21:20:09 +08:00
Michael (XIAO Xufeng)
d741b08fe7
Merge branch 'feature/esp32c3_deep_sleep_rtcfastmem' into 'master'
...
esp32c3: Finish deep sleep support
Closes IDF-2560
See merge request espressif/esp-idf!12031
2021-01-26 12:53:34 +08:00
Angus Gratton
0eb8d7e185
esp_hw_support esp32c3: Add deep sleep rtc crc calculation support
...
Last step to enable deep sleep on ESP32-C3 in all configurations
2021-01-25 17:20:04 +00:00
Michael (XIAO Xufeng)
2b83418141
adc: add fallback calibration method
...
Also:
1. Separate static configuration into init phase to improve
performance
2. Add a init code config layer to avoid duplicated configuration
3. Add a HW_CALIBRATION_V1 caps
2021-01-25 20:30:42 +08:00
Armando
f5f0461264
tmpsensor: add temp_sensor.h for c3
2021-01-25 04:51:40 +00:00
Angus Gratton
a5fb7deda5
driver: Update/cleanup esp32c3 rtc_tempsensor.c
2021-01-25 04:51:40 +00:00
Michael (XIAO Xufeng)
d7d1dee208
system: reset dma when soft reset
2021-01-25 04:51:40 +00:00
Li Shuai
3170ecf268
deep sleep: add empty interface rtc_deep_sleep_start for esp32c3
2021-01-20 13:28:34 +08:00