The issue is `esp_flash_write_encryped` function in ROM on ESP32C3, ESP32S3
calls legacy implementation, which uses old configuration. And this causes
write fails.
The solution in this commit is to compile and link this function(and related)
in IRAM instead of the ROM one.
The IRAM cost increases around 1.2KB after the fix
1.Optimize bin size for STA only mode
2.Change fragment threshold to 256
3.Support fragment for LR mode
4.Fix rx fragment fail in Open mode.
5.Fix ampdu duration issue
1.bringup c3 v1.1 and sync func to c3 eco7 rom
2.support to set null&probe lifetime
3.support to adjust listen interval to dtim period
4.support tx pkt w/o wake null
5.allow to tx null0 if requtest to rx data
- Fixed extended adv address setting after adv restart
- Fixed scan channel index setting for extended scan
- Add API to set aux channel index for extended adv
Some APs are configured to hide the SSID, the length field of the SSID element
in the Beacon frame is set to 0. This can cause incorrect parsing of the Beacon
by the Wi-Fi MAC hardware.
Some APs send two beacon frames with different BSSID in a TBTT cycle. After
correctly parsing the beacon of the associated AP, it continue to receive the
other beacon frame, which will cause the MAC to remain in a wait RX/TXING
state, blocking the Wi-Fi go to sleep.
Used esp-rom tag esp32s3-20210327 and did manual cleanup.
Rename s_usb_osglue to rom_usb_osglue like it was done for esp32s2.
Some comments in esp32s2 headers are synced from esp32s3.
- Move {target}/rom/miniz.h to common miniz.h
- Add ESP_ROM_HAS_MZ_CRC32 for ESP32/S2/S3/C3/H2
- Alias mz_crc32 to crc32_le if chips not support ESP_ROM_HAS_MZ_CRC32
sizeof(time_t) was previously switched from 4 to 8, ROM functions that use
time_t or dependent types (such as "struct stat") are no longer called due as
they still treat sizeof(time_t) as 4 (see commit
24c20d18).
However, there is a ROM callpath that was left out. If putchar is the first
stdio print related call, the call path will result in cantwrite() ->
__swsetup_r() -> __smakebuf_r() -> __swhatbuf_r() using the ROM "struct stat"
(where sizeof(time_t)==4).
Instead of removing all printf related ROM newlib functions (which will result
in increased binary size), this commit adds a workaround to setup the stdio
files before any print related calls occur.
This results in cantwrite() always returning false, thus the callpath described
above never being reached.
Closes https://github.com/espressif/esp-idf/issues/9269
