morris
d9e113f877
fix(rmt): power up memory block
2024-07-18 14:41:13 +08:00
Mahavir Jain
ae9f7f32ae
Merge branch 'bugfix/c5_mpi_ecc_power_mode_v5.2' into 'release/v5.2'
...
docker / docker (push) Has been cancelled
fix(hal): correct mpi/ecc peripheral power up sequence for ESP32-C5 (v5.2)
See merge request espressif/esp-idf!31863
2024-07-15 15:05:52 +08:00
Cao Sen Miao
a44f8179de
refactor(i2c): Add reset and clock control to i2c ll layer
2024-07-04 12:29:05 +08:00
Mahavir Jain
adea6829b3
fix(hal): correct the power up sequence for MPI/ECC peripherals in ESP32-C5
2024-07-02 13:36:54 +05:30
Song Ruo Jing
707aebc607
feat(uart): support uart module sleep retention on c6/h2
2024-06-18 15:04:20 +08:00
morris
9b3ae86417
Merge branch 'bugfix/fix_gpio_etm_multi_task_v5.2' into 'release/v5.2'
...
fix(gpio_etm): allow one GPIO binds to multiple ETM tasks (v5.2)
See merge request espressif/esp-idf!30456
2024-04-25 16:31:22 +08:00
Song Ruo Jing
15962a953a
fix(uart): Fix mismatch wakeup rising edges required with the threshold configured
...
Closes https://github.com/espressif/esp-idf/issues/12586
2024-04-24 16:25:54 +08:00
Song Ruo Jing
373e585bb7
fix(gpio_etm): allow one GPIO binds to multiple ETM tasks
2024-04-24 16:01:34 +08:00
Song Ruo Jing
c55a07bf57
refactor(uart): add support to be able to test LP_UART port
...
Increase LP_UART_EMPTY_THRESH_DEFAULT value to 4. The original value
could cause the FIFO become empty before filling next data into the FIFO
when the buadrate is high. TX_DONE interrupt would raise before actual
transmission complete in such case.
2024-04-15 19:39:30 +08:00
harshal.patil
85186042c3
feat(hal/ecdsa): Add HAL API for operation successful check
2024-04-11 12:33:06 +05:30
Cao Sen Miao
7c233ebc80
feat(i2c_master): Add parameter to config I2C scl await time
2024-04-07 15:06:31 +08:00
Cao Sen Miao
e3a854769a
feat(spi_flash): Enable auto suspend on when flash works under 120M
2023-12-15 16:57:53 +08:00
Song Ruo Jing
55ed548cc6
fix(console): enable to select UART1 port for console output
...
This feature was only enabled for esp32, esp32s2, esp32s3 previously.
Now, enabling this feature for all targets.
2023-11-30 11:26:09 +08:00
Mahavir Jain
f434d21f4a
fix(ecdsa): remove unused k_mode from the ECDSA HAL/LL API
...
For ESP32-H2 case, the hardware k mode is always enforced through
efuse settings (done in startup code).
For ESP32-P4 case, the software k mode is not supported in the peripheral
itself and code was redundant.
2023-11-17 07:13:53 +00:00
morris
2e8cc61af7
feat(rmt): support calling rmt_receive in ISR callback
2023-11-08 14:32:26 +08:00
morris
80997d5860
fix(i2c): read write FIFO memory by volatile
2023-10-30 10:34:43 +08:00
Armando
263e39c32b
fix(sdmmc): fix ll layer wrong assertion
2023-10-25 06:03:25 +00:00
Cao Sen Miao
8d639492f2
feat(i2c_slave): Add new implementation and API for I2C slave
2023-10-24 18:44:49 +08:00
morris
767595a22f
Merge branch 'feature/mcpwm_timer_change_freq' into 'master'
...
feat(mcpwm): support update timer period dynamically
Closes IDFGH-11145
See merge request espressif/esp-idf!26419
2023-10-23 15:51:14 +08:00
Jiang Jiang Jian
0049cc663a
Merge branch 'feature/support_output_internal_clock' into 'master'
...
feature(gpio): Add api to support output internal clock
Closes IDF-8016 and IDF-4935
See merge request espressif/esp-idf!25753
2023-10-22 22:06:13 +08:00
morris
0cbcb9f5ea
feat(mcpwm): support update timer period dynamically
...
Implement the requirement asked in
https://www.esp32.com/viewtopic.php?f=13&t=35919
2023-10-20 16:57:25 +08:00
morris
565b9fd117
Merge branch 'refactor/hal_util_bitwise_reverse8' into 'master'
...
hal: add util function to reverse a 8bit byte
See merge request espressif/esp-idf!26532
2023-10-20 09:43:15 +08:00
wuzhenghui
1f10c84a4f
change(hal): rewrite gpio_ll_set_iomux_pin_ctrl api
2023-10-19 22:24:08 +08:00
Armando (Dou Yiwen)
471f1f61ae
Merge branch 'feature/support_sdmmc_ver2_on_p4' into 'master'
...
sdmmc: esp32p4 support
Closes IDF-6502
See merge request espressif/esp-idf!25405
2023-10-19 22:00:40 +08:00
Wan Lei
a9b6c98489
Merge branch 'refactor/spi_using_rcc_automic_lock' into 'master'
...
refac(spi): update periph_module_xxx with rcc_atomic_lock for periph bus
Closes IDF-8159
See merge request espressif/esp-idf!26394
2023-10-18 20:36:51 +08:00
Armando
70314b56d5
feat(sdmmc): supported sd2.0 on esp32p4
2023-10-18 11:57:55 +00:00
Wan Lei
9f413d5d8d
Merge branch 'feature/esp32p4_hp_ledc_support' into 'master'
...
feat(ledc): support ledc on esp32p4
Closes IDF-6510
See merge request espressif/esp-idf!25356
2023-10-18 15:27:54 +08:00
morris
e92a1515be
feat(hal): add util function to reverse a 8bit byte
2023-10-18 09:48:14 +08:00
wanlei
57614bbad2
feat(ledc): support ledc on esp32p4
2023-10-17 16:40:04 +08:00
wanlei
b81cafe42e
refac(spi): update periph_module_xxx with rcc_automic_lock for periph bus
2023-10-17 11:32:23 +08:00
Aditya Patwardhan
ade65add54
feat(hal): Added HAL and LL layer for Key Manager
2023-10-16 09:26:37 +05:30
Aditya Patwardhan
6b4d2140ee
feat(hal): Added HAL and LL layer for HUK
2023-10-16 09:26:14 +05:30
Mahavir Jain
6b62065b92
Merge branch 'fix/crypto_periphs_use_rcc_atomic_blocks' into 'master'
...
Use rcc atomic blocks to enable/reset crypto peripherals
See merge request espressif/esp-idf!25811
2023-10-13 22:37:58 +08:00
Song Ruo Jing
321f628ff5
feat(gpio): add a dump API to dump IO configurations
...
Closes https://github.com/espressif/esp-idf/issues/12176
2023-10-12 17:34:20 +08:00
harshal.patil
57d10477da
feat(ecdsa): use RCC atomic block to enable/reset the ECDSA peripheral
2023-10-11 14:59:04 +05:30
harshal.patil
43864f7fb4
feat(ds): use RCC atomic block to enable/reset the DS peripheral
2023-10-11 14:59:04 +05:30
harshal.patil
18b93e9564
feat(hmac): use RCC atomic block to enable/reset the HMAC peripheral
2023-10-11 14:59:04 +05:30
harshal.patil
1c6ff8ce9f
feat(ecc): use RCC atomic block to enable/reset the ECC peripheral
2023-10-11 14:59:04 +05:30
harshal.patil
c5cc4f488a
feat(mpi): use RCC atomic block to enable/reset the MPI peripheral
2023-10-11 14:59:03 +05:30
Wan Lei
f92b18053a
Merge branch 'feature/esp32p4_hp_spi_support' into 'master'
...
Feature/esp32p4 hp spi master driver support
Closes IDF-7502
See merge request espressif/esp-idf!24963
2023-10-09 18:37:35 +08:00
wanlei
00fcdce725
feat(spi_master): p4 add master driver supported
2023-10-08 14:45:12 +08:00
gaoxu
bc2a6bd730
feat(uart): spilt LP and HP uart set_baudrate function
2023-10-08 10:10:02 +08:00
gaoxu
4f24f805cc
feat(uart): add LP-UART GPIO support
2023-10-08 10:10:02 +08:00
gaoxu
3e3e928209
feat(uart): move periph_ll_uart_enabled to uart_ll.h
2023-10-08 10:10:02 +08:00
gaoxu
4541ad134d
feat(uart): add RCC atomic block to uart/lp-uart peripheral
2023-10-08 10:10:02 +08:00
gaoxu
c7afa0dcef
feat(uart): uart(hp,lp) support on esp32p4
2023-10-08 10:10:00 +08:00
Kevin (Lao Kaiyao)
4c6f4b39f1
Merge branch 'feature/support_i2s_on_p4' into 'master'
...
feat(i2s): support i2s on esp32p4
Closes IDF-6508
See merge request espressif/esp-idf!24280
2023-09-29 00:50:04 +08:00
laokaiyao
e1039f9ce2
fix(i2s_platform): merge the i2s platform acquire API
2023-09-28 15:03:27 +08:00
laokaiyao
72a0746e62
refactor(apll): move the apll soc caps to clk_tree_ll
2023-09-28 15:03:27 +08:00
laokaiyao
0b0f25c30d
feat(i2s): supported getting the tx sync count and specify interrupt flags
2023-09-28 15:03:27 +08:00