1.Optimize bin size for STA only mode
2.Change fragment threshold to 256
3.Support fragment for LR mode
4.Fix ampdu duration issue
5.Fix rx fragment fail in Open mode.
Update wifi lib with below -
1. Create NAN Discovery SM for beaconing & cluster formation
2. Create NAN interface for Tx/Rx of beacons & action frames
3. Add commands & events for NAN Services Publish/Subscribe/Followup
4. Add NAN Datapath definitions, Events, Peer structures
5. Support for forming and parsing of Datapath related attributes
6. Modules for NDP Req, Resp, Confirm, Term, Peer management
7. NAN Interface related additions in Datapath, Data Tx Q's
In addition include below changes -
1. Add netif and driver support for NAN Interface
2. Add simple examples for Publisher-Subscriber usecases
3. Add an advanced console example that supports commands
for NAN Discovery, Services & Datapath
4. Add wifi_apps for providing better NAN API's and Peer management
Co-authored-by: Shyamal Khachane <shyamal.khachane@espressif.com>
modem retention: Support esp32c6 wifi MAC and baseband sleep retention
sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request
sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep
add i2c_ana master header file to project
auto beacon: release PMU's lock on root clock source (it is locked in the PLL)
wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL
clock, PMU will forcibly lock the root clock source as PLL, when the root
clock source of the software system is selected as PLL, we need to release
the root clock source locking.
When it is judged that the PLL is locked by PMU after wakeing up from the PMU
modem state, switch the root clock source to the PLL in the sleep process (a
critical section).
auto beacon: fix the failure to receive broadcast/multicast frames in modem state
When the multicast field in the beacon frame received in the PMU modem state is
True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to
stabilize and then restores the MAC context) and starts to receive
broadcast/multicast frames (Broadcast/Multicast frames will be sent after a
minimum delay of 48 us after the beacon frame), because the PMU waits for the HP
LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame
reception to be missed.
auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state
update Digital Peripheral (M2A switch) REGDMA restore time parameter
auto beacon: fix the issue that only channel 1 can connect to AP in modem state
Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
If appropriate interface is not set then RX callback can potentially dereference
null pointer from `s_wifi_netifs` table. This in-fact resulted in `LoadProhibited` exception
in HTTP server example test case.
Order here for setting interface and then registering callback was correct but
it was modified in 0e71a325de causing this regression.
Prior to this change "esp_wifi_clear_default_wifi_driver_and_handlers"
will not remove netif pointer from table when both AP and STA interfaces were
created and destroying default wifi interfaces is done in unfortunate
order. As a result there is dangling pointer left and it may cause crash in
later code (i.e. when esp_wifi_stop() is called).
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
Modify the NGed drivers to adopt new clock ids
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
