Song Ruo Jing
6ad80f0332
refactor(uart): make uart driver as component, and fix astyle
2023-12-15 17:03:51 +08:00
C.S.M
77c49cf3e2
Merge branch 'refactor/esp_driver_i2c' into 'master'
...
refactor(i2c): Make i2c driver as a seperate component
See merge request espressif/esp-idf!27860
2023-12-15 10:48:33 +08:00
Cao Sen Miao
aa10770323
refactor(i2c): Make i2c driver as a seperate component
2023-12-14 15:39:35 +08:00
Harshit Malpani
bbbede07d0
fix(partition_table): Check partition size for type APP
...
The size of partition of type APP should be multiple of 4 KB. Partition
generation tool now make this as a mandatory requirement. This is
minimum flash erase size. If the size of the APP type partition is not
aligned to 4 KB then the last erase operation could go beyond the allocated
partition and hence may fail. This issue would only be observed when the
firmware size grows very close to the allocated partition size, and hence
causing the OTA update to fail.
For already deployed devices on-field with the size of APP partition not
aligned to flash sector boundary, it is best to ensure that firmware
size always remains within the lower 4 KB boundary of the total
allocated space. While migrating to ESP-IDF 5.3 release, partition table
for an existing project can be adjusted accordingly for the build to
succeed.
Found during discussion in https://github.com/espressif/esp-idf/pull/12460
2023-12-11 10:14:57 +05:30
morris
d171a7b958
change(sdm): move driver to a new component: esp_driver_sdm
2023-12-01 10:03:48 +08:00
Ivan Grokhotkov
88fa79fcc7
feat(unity): upgrade to 2.6.0-RC1
2023-11-28 20:22:02 +01:00
Cao Sen Miao
09f99e51db
refactor(temperature_sensor): Make temperature sensor driver as a seperate component
2023-11-27 17:51:40 +08:00
morris
f2751213fd
feat(rmt): move the driver to a new component
2023-11-25 00:29:53 +00:00
laokaiyao
ef7772eee0
refactor(dac): make dac driver as component
2023-11-23 12:04:06 +08:00
Armando (Dou Yiwen)
b8121227b6
Merge branch 'refactor/esp_driver_sdio' into 'master'
...
refactor(sdio): place sdio slave driver into a new component
Closes IDF-8373
See merge request espressif/esp-idf!27125
2023-11-22 21:13:00 +08:00
Armando
22b4270a6b
refactor(sdio): place sdio slave driver into a new component
2023-11-22 10:37:31 +08:00
Lou Tian Hao
cde12242b4
Merge branch 'feature/support_ext1_clear_spec_pins' into 'master'
...
feat: support ext1 add or remove spec pin for chips which support ext1 wakeup
Closes IDFGH-11440
See merge request espressif/esp-idf!26999
2023-11-21 11:29:33 +08:00
Lou Tianhao
ea7cfc40ae
change(pm/ext1): replace esp_sleep_clear_ext1_wakeup_io by esp_sleep_disable_ext1_wakeup_io
2023-11-20 19:30:50 +08:00
Lou Tianhao
8db9f79bd2
change(pm/ext1): replace esp_sleep_set_ext1_wakeup_io by esp_sleep_enable_ext1_wakeup_io
2023-11-20 16:04:01 +08:00
laokaiyao
74441d14ab
refactor(i2s): make i2s driver as component
2023-11-17 21:29:17 +08:00
Lou Tianhao
aaa1ea8af1
docs(pm/ext1): support esp_sleep_enable_io_ext1_wakeup and esp_sleep_disable_io_ext1_wakeup
2023-11-17 16:23:56 +08:00
Lou Tianhao
cc0e73a11f
feat(pm/ext1): support esp_sleep_enable_io_ext1_wakeup and esp_sleep_disable_io_ext1_wakeup
...
squash! feat(pm/ext1): support esp_sleep_enable_io_ext1_wakeup and esp_sleep_disable_io_ext1_wakeup
2023-11-17 16:20:38 +08:00
laokaiyao
bc0201d6f0
refactor(ana_cmpr): make analog comparator driver as component
2023-11-17 10:05:22 +08:00
Armando
c7c38b7904
refactor(sdmmc): place sdmmc driver into a new component
2023-11-16 15:37:32 +08:00
morris
eb5183f503
feat(mcpwm): refactor mcpwm driver into a component
2023-11-09 22:05:06 +08:00
Armando
02f05f39bb
doc(spi): update esp_driver_spi to migration guides
2023-11-09 14:50:05 +08:00
morris
f2304a5f73
docs: adding migration guide about esp_driver_xyz components
2023-11-06 17:09:31 +08:00
