refactor(temperature_sensor): Make temperature sensor driver as a seperate component

components/driver/CMakeLists.txt

@@ -13,7 +13,6 @@ set(includes "deprecated"
              "ledc/include"
              "parlio/include"
              "sigma_delta/include"
-             "temperature_sensor/include"
              "touch_sensor/include"
              "twai/include"
              "uart/include"
@@ -95,8 +94,7 @@ endif()
 
 # Temperature Sensor related source files
 if(CONFIG_SOC_TEMP_SENSOR_SUPPORTED)
-    list(APPEND srcs "temperature_sensor/temperature_sensor.c"
-                     "deprecated/rtc_temperature_legacy.c")
+    list(APPEND srcs "deprecated/rtc_temperature_legacy.c")
 endif()
 
 # Touch Sensor related source files
@@ -146,7 +144,7 @@ else()
                            # have a public dependency on other "esp_driver_foo" components
                                     esp_driver_gpio esp_driver_pcnt esp_driver_gptimer esp_driver_spi esp_driver_mcpwm
                                     esp_driver_ana_cmpr esp_driver_i2s esp_driver_sdmmc esp_driver_sdspi esp_driver_sdio
-                                    esp_driver_dac esp_driver_rmt
+                                    esp_driver_dac esp_driver_rmt esp_driver_tsens
                            LDFRAGMENTS ${ldfragments}
                           )
 endif()

components/driver/Kconfig

@@ -64,34 +64,6 @@ menu "Driver Configurations"
 
     orsource "./twai/Kconfig.twai"
 
-    menu "Temperature sensor Configuration"
-        depends on SOC_TEMP_SENSOR_SUPPORTED
-
-        config TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN
-            bool "Suppress legacy driver deprecated warning"
-            default n
-            help
-                Wether to suppress the deprecation warnings when using legacy temperature sensor driver
-                (driver/temp_sensor.h). If you want to continue using the legacy driver,
-                and don't want to see related deprecation warnings, you can enable this option.
-
-        config TEMP_SENSOR_ENABLE_DEBUG_LOG
-            bool "Enable debug log"
-            default n
-            help
-                Wether to enable the debug log message for temperature sensor driver.
-                Note that, this option only controls the temperature sensor driver log, won't affect other drivers.
-
-        config TEMP_SENSOR_ISR_IRAM_SAFE
-            depends on SOC_TEMPERATURE_SENSOR_INTR_SUPPORT
-            bool "Temperature sensor ISR IRAM-Safe"
-            default n
-            help
-                Ensure the Temperature Sensor interrupt is IRAM-Safe by allowing the interrupt handler to be
-                executable when the cache is disabled (e.g. SPI Flash write).
-
-    endmenu # TEMP_SENSOR Configuration
-
     orsource "./uart/Kconfig.uart"
 
     menu "Sigma Delta Modulator Configuration"

components/driver/test_apps/.build-test-rules.yml

@@ -96,10 +96,6 @@ components/driver/test_apps/sigma_delta:
   depends_components:
     - esp_driver_gpio
 
-components/driver/test_apps/temperature_sensor:
-  disable:
-    - if: SOC_TEMP_SENSOR_SUPPORTED != 1
-
 components/driver/test_apps/touch_sensor_v1:
   disable:
     - if: SOC_TOUCH_SENSOR_VERSION != 1

components/esp_driver_tsens/CMakeLists.txt

@@ -0,0 +1,11 @@
+set(srcs)
+set(priv_req efuse)
+set(public_include "include")
+if(CONFIG_SOC_TEMP_SENSOR_SUPPORTED)
+    list(APPEND srcs "src/temperature_sensor.c")
+endif()
+
+idf_component_register(SRCS ${srcs}
+                       INCLUDE_DIRS ${public_include}
+                       PRIV_REQUIRES ${priv_req}
+                      )

components/esp_driver_tsens/Kconfig

@@ -0,0 +1,27 @@
+menu "ESP-Driver:Temperature Sensor Configurations"
+    depends on SOC_TEMP_SENSOR_SUPPORTED
+
+    config TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN
+        bool "Suppress legacy driver deprecated warning"
+        default n
+        help
+            Wether to suppress the deprecation warnings when using legacy temperature sensor driver
+            (driver/temp_sensor.h). If you want to continue using the legacy driver,
+            and don't want to see related deprecation warnings, you can enable this option.
+
+    config TEMP_SENSOR_ENABLE_DEBUG_LOG
+        bool "Enable debug log"
+        default n
+        help
+            Wether to enable the debug log message for temperature sensor driver.
+            Note that, this option only controls the temperature sensor driver log, won't affect other drivers.
+
+    config TEMP_SENSOR_ISR_IRAM_SAFE
+        depends on SOC_TEMPERATURE_SENSOR_INTR_SUPPORT
+        bool "Temperature sensor ISR IRAM-Safe"
+        default n
+        help
+            Ensure the Temperature Sensor interrupt is IRAM-Safe by allowing the interrupt handler to be
+            executable when the cache is disabled (e.g. SPI Flash write).
+
+endmenu # TEMP_SENSOR Configuration

components/esp_driver_tsens/src/temperature_sensor.c

@@ -76,7 +76,7 @@ static void IRAM_ATTR temperature_sensor_isr(void *arg)
     temperature_sensor_ll_clear_intr();
     bool cbs_yield = false;
     temperature_sensor_handle_t tsens = (temperature_sensor_handle_t) arg;
-    temperature_val_intr_condition_t intr_condition = (temperature_sensor_ll_get_wakeup_reason() == 1 ? TEMPERATURE_VAL_HIGHER_THAN_HIGH_THRESHOLD: TEMPERATURE_VAL_LOWER_THAN_LOW_THRESHOLD);
+    temperature_val_intr_condition_t intr_condition = (temperature_sensor_ll_get_wakeup_reason() == 1 ? TEMPERATURE_VAL_HIGHER_THAN_HIGH_THRESHOLD : TEMPERATURE_VAL_LOWER_THAN_LOW_THRESHOLD);
     temperature_sensor_threshold_event_data_t data = {
         .celsius_value = s_temperature_regval_2_celsius(tsens, temperature_sensor_ll_get_raw_value()),
         .intr_condition = intr_condition,
@@ -243,7 +243,7 @@ esp_err_t temperature_sensor_get_celsius(temperature_sensor_handle_t tsens, floa
 
 static uint8_t s_temperature_celsius_2_regval(temperature_sensor_handle_t tsens, int8_t celsius)
 {
-    return (uint8_t)((celsius + TEMPERATURE_SENSOR_LL_OFFSET_FACTOR + TEMPERATURE_SENSOR_LL_DAC_FACTOR * tsens->tsens_attribute->offset)/TEMPERATURE_SENSOR_LL_ADC_FACTOR);
+    return (uint8_t)((celsius + TEMPERATURE_SENSOR_LL_OFFSET_FACTOR + TEMPERATURE_SENSOR_LL_DAC_FACTOR * tsens->tsens_attribute->offset) / TEMPERATURE_SENSOR_LL_ADC_FACTOR);
 }
 
 IRAM_ATTR static int8_t s_temperature_regval_2_celsius(temperature_sensor_handle_t tsens, uint8_t regval)
@@ -305,8 +305,8 @@ esp_err_t temperature_sensor_register_callbacks(temperature_sensor_handle_t tsen
     // lazy install interrupt service.
     if (!tsens->temp_sensor_isr_handle) {
         ret = esp_intr_alloc_intrstatus(ETS_APB_ADC_INTR_SOURCE, isr_flags,
-                                    (uint32_t)temperature_sensor_ll_get_intr_status(),
-                                    TEMPERATURE_SENSOR_LL_INTR_MASK, temperature_sensor_isr, tsens, &tsens->temp_sensor_isr_handle);
+                                        (uint32_t)temperature_sensor_ll_get_intr_status(),
+                                        TEMPERATURE_SENSOR_LL_INTR_MASK, temperature_sensor_isr, tsens, &tsens->temp_sensor_isr_handle);
     }
 
     if (cbs->on_threshold != NULL) {

components/esp_driver_tsens/src/temperature_sensor_private.h

@@ -43,7 +43,6 @@ struct temperature_sensor_obj_t {
 #endif // SOC_TEMPERATURE_SENSOR_INTR_SUPPORT
 };
 
-
 #ifdef __cplusplus
 }
 #endif

components/esp_driver_tsens/test_apps/.build-test-rules.yml

@@ -0,0 +1,8 @@
+# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
+
+components/esp_driver_tsens/test_apps/temperature_sensor:
+  disable:
+    - if: SOC_TEMP_SENSOR_SUPPORTED != 1
+  depends_components:
+    - esp_driver_tsens
+    - esp_phy

components/esp_driver_tsens/test_apps/temperature_sensor/main/CMakeLists.txt

@@ -5,5 +5,5 @@ set(srcs "test_app_main.c"
 # In order for the cases defined by `TEST_CASE` to be linked into the final elf,
 # the component can be registered as WHOLE_ARCHIVE
 idf_component_register(SRCS ${srcs}
-                       PRIV_REQUIRES unity driver esp_wifi test_utils nvs_flash
+                       PRIV_REQUIRES unity esp_wifi test_utils nvs_flash esp_driver_tsens
                        WHOLE_ARCHIVE)

components/esp_driver_tsens/test_apps/temperature_sensor/main/test_temperature_phy.c

@@ -40,10 +40,11 @@ struct temperature_sensor_obj_t {
 
 static void start_wifi_as_softap(void)
 {
+    uint8_t ssid_len = strlen(TEST_DEFAULT_SSID);
     wifi_config_t w_config = {
         .ap.ssid = TEST_DEFAULT_SSID,
         .ap.password = TEST_DEFAULT_PWD,
-        .ap.ssid_len = strlen(TEST_DEFAULT_SSID),
+        .ap.ssid_len = ssid_len,
         .ap.channel = TEST_DEFAULT_CHANNEL,
         .ap.authmode = WIFI_AUTH_WPA2_PSK,
         .ap.ssid_hidden = false,
@@ -66,7 +67,7 @@ static void start_wifi_as_sta(void)
 static void stop_wifi(void)
 {
     TEST_ESP_OK(esp_wifi_stop());
-    vTaskDelay(500/portTICK_PERIOD_MS);
+    vTaskDelay(500 / portTICK_PERIOD_MS);
 }
 
 static void wifi_connect(void)
@@ -91,7 +92,7 @@ static void test_wifi_establish_sta(void)
     unity_wait_for_signal("AP start");
 
     // make sure softap has started
-    vTaskDelay(1000/portTICK_PERIOD_MS);
+    vTaskDelay(1000 / portTICK_PERIOD_MS);
     wifi_connect();
     unity_send_signal("connect");
     unity_wait_for_signal("tsens test done");

docs/doxygen/Doxyfile

@@ -80,7 +80,6 @@ INPUT = \
     $(PROJECT_PATH)/components/driver/parlio/include/driver/parlio_tx.h \
     $(PROJECT_PATH)/components/driver/parlio/include/driver/parlio_types.h \
     $(PROJECT_PATH)/components/driver/sigma_delta/include/driver/sdm.h \
-    $(PROJECT_PATH)/components/driver/temperature_sensor/include/driver/temperature_sensor.h \
     $(PROJECT_PATH)/components/driver/touch_sensor/include/driver/touch_sensor_common.h \
     $(PROJECT_PATH)/components/driver/twai/include/driver/twai.h \
     $(PROJECT_PATH)/components/driver/uart/include/driver/uart.h \
@@ -143,6 +142,7 @@ INPUT = \
     $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_master.h \
     $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_slave_hd.h \
     $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_slave.h \
+    $(PROJECT_PATH)/components/esp_driver_tsens/include/driver/temperature_sensor.h \
     $(PROJECT_PATH)/components/esp_eth/include/esp_eth_com.h \
     $(PROJECT_PATH)/components/esp_eth/include/esp_eth_driver.h \
     $(PROJECT_PATH)/components/esp_eth/include/esp_eth_mac.h \

docs/en/migration-guides/release-5.x/5.3/peripherals.rst

@@ -17,6 +17,7 @@ In order to control the dependence of other components on drivers at a smaller g
 - `esp_driver_i2s` - Driver for I2S
 - `esp_driver_dac` - Driver for DAC
 - `esp_driver_rmt` - Driver for RMT
+- `esp_driver_tsens` - Driver for Temperature Sensor
 
 For compatibility, the original `driver`` component is still treated as an all-in-one component by registering these `esp_driver_xyz`` components as its public dependencies. In other words, you do not need to modify the CMake file of an existing project, but you now have a way to specify the specific peripheral driver that your project depends on.
 

docs/zh_CN/migration-guides/release-5.x/5.3/peripherals.rst

@@ -17,6 +17,7 @@
 - `esp_driver_i2s` - I2S 驱动
 - `esp_driver_dac` - DAC 驱动
 - `esp_driver_rmt` - RMT 驱动
+- `esp_driver_tsens` - 温度传感器驱动
 
 为了兼容性，原来的 `driver` 组件仍然存在，并作为一个 “all-in-one" 的组件，将以上这些 `esp_driver_xyz` 组件注册成自己的公共依赖。换句话说，你无需修改既有项目的 CMake 文件，但是你现在多了一个途径去指定你项目依赖的具体的外设驱动。
 

examples/peripherals/.build-test-rules.yml

@@ -322,10 +322,14 @@ examples/peripherals/spi_slave_hd/segment_mode/seg_slave:
 examples/peripherals/temperature_sensor/temp_sensor:
   disable:
     - if: SOC_TEMP_SENSOR_SUPPORTED != 1
+  depends_components:
+    - esp_driver_tsens
 
 examples/peripherals/temperature_sensor/temp_sensor_monitor:
   disable:
     - if: SOC_TEMPERATURE_SENSOR_INTR_SUPPORT != 1
+  depends_components:
+    - esp_driver_tsens
 
 examples/peripherals/timer_group/gptimer:
   disable: