1. Update wifi lib with fix for dropping bcast PMF deauths/disassocs
with certain reason codes
2. Fix FTM not working in connected state and some other FTM bugs
1. RRM capability addition for open AP
2. Crash during scan flush
3. Station not able to connect if disassoc timer is present in BTM request
4. Memory leaks during wifi init/deinit.
Update wifi lib with below features -
1. ASAP mode for both Initiator and Responder
2. Offchannel FTM while connected to AP (ASAP only)
3. Support up to 3 Initiators simultaneously
4. Session termination, failure support etc
5. Mem-zero AP scan buffer in get_records API
1. Fix aes_unwrap functionality when hardware acceleration is disabled
2. Fix compilation errors when mbedTLS is disabled.
3. Disable WPA3 when mbedTLS is disabled.
1. Fix mesh deinit blocking issue
2. Fix root has no eb for deauth frames during the networking
3. Add esp_mesh_send_block_time to set blocking time of esp_mesh_send
4. Forward Mgmt frames with skipping CCMP headers to fix parsing issues in Application for ESP32C3
1. Fix the issue that the parameters obtained from RAM cannot be saved to NVS
2. Modify not to store the default value in NVS
3. Fixed issue with hidden AP scans after connecting AP.
4. Fix watchdog issue when receiving action frame.
5. Fixed issue of reason code change from 15 to 204 when provide wrong password
6. Fix set config return value error
7. Fix ampdu age timer memory leak
1. Fix the bug that Wi-Fi performance is impacted by BLE starting scan for a while in some scenarios on ESP32-C3.
2. Fix the bug that Wi-Fi performance is impacted when Bluetooth change state for a while in some scenarios on ESP32-C3.
3. Fix the bug that BLE performance is impacted by Wi-Fi scan on ESP32-C3.
4. Fix the bug that Wi-Fi scan fails when BLE is scanning on ESP32-C3.
5. Fix Wi-Fi ACK and CTS rate when low rate is disabled on ESP32-C3.
1. Clear hotspot bss when auth timeout happens.
2. Fix PMK not saved in NVS for SoftAP for PSK mode.
3. Fix the bug for esptouch find hidden AP fail.
4. Fix not connect to open AP when WPA3 auth fail.
components/bt: Do not use feature: timer support isr dispatch method
disable controller after wake up finished.
protect critical section of power down
choose clk in sleep
components/coex: mac bb power down in light sleep
components/coex: Macro changed
components/os: protect reserved interrupt number
update phy to phy_version 300,6e46ba7,Jan 25 2021
some bugfix
1. Support for FTM to work without any connection
1. Support for ESP32-C3 chip
3. Fix error case handling if FTM fails
4. Fix asynchronization, re-transmission related issues
Update wifi lib with below additions -
1. Add FTM frame formation, IEEE definitions, event and IOCTL.
2. Implementation of FTM bursts, Measurements and RTT calculations
3. Fix Watchdog timeout, crashes with better cleanup of timers
4. Included FTM Report raw data in FTM event
Closes https://github.com/espressif/esp-idf/issues/5059
Add FTM support for below configuration -
1. Station(connected) as Initiator with AP as responder
2. SoftAP as responder with the connected Station
Added Station example with runtime FTM configurations.
1. Add Example for DPP Enrollee
2. Use DPP Supplicant API's to setup connection
3. Add support for multiple channels in Bootstrapping
4. Add Unity testcase for testing Offchannel operations
Closes https://github.com/espressif/esp-idf/issues/5654
1. Modify DPP Protocol modules for our purpose
2. Add DPP supplicant task and modules to handle DPP frames
3. Add DPP Public API's and definitions for DPP
1. Add API's and structures for Remain-onChannel & Action Tx
2. Handling of events and callbacks for the operations
3. Update WiFi lib with related API support
esp_phy_enable and esp_phy_disable were declared both with IRAM attr
and with (noflash) in the linker fragment file, causing ldgen to emit
warnings.
Remove IRAM_attr and let the linker fragment decide placement
1. Fix the bug that LR can't work on esp32c3
2. Unlock mutex for esp_wifi_80211_tx when out of memory
3. Fix issue that esp_wifi_80211_tx can't be used in ap mode
4. Fix the compile error for esp32c3 in ESPTouch v2
1. Add check CSA state before CSA timer process
2. Change wifi scan duration from 120ms to 100ms
3. Using deport reg instead of ahb
4. Check TID in ieee80211_recv_bar()
5. Revert to report specific reason code when receiving deauth during 4-way-handshark
6. Fix the bug that tx ampdu parameter is not from peer device
Wi-Fi enables and disables ADC when exiting and entering sleep mode.
Coordinate ADC power state with other modules, using adc_power_acquire
and adc_power_release.
Include external ram section in the linker template to process it
through linker script generation mechanism. This enables redirection of .bss section to external memory using linker fragments
libnet80211, libpp, libbt, liblwip: Redirect .bss through fragments
Flag ESP32_WIFI_ENABLE_WPA3_SAE from Menuconfig is used to
control the stack size required by WPA3. Use the same flag
to compile out the WPA3 code and control the code size.
With this flag disabled code footprint reduces by about 7.7kB
in libwpa_supplicant.a
Update WiFi libs with added checks to cleanly handle disabling
of WPA3 callbacks.
Closes https://github.com/espressif/esp-idf/issues/5971
This commit adds different features from 802.11k and 802.11v
specifications to make the device ready for network assisted
roaming. It also adds initial framework for device to detect
whether it needs to move to a better AP.
Followings are added as part of this.
1. Support for sending neighbor report request and provide
the report back to the APP.
2. Support for beacon measurement report.
3. Support for link measurement report.
4. Support for sending bss transition management query frame
(triggered by the APP).
5. Support for bss transition management request and move
to the candidate based on that.
6. Sending the bss transition management response.
1. Fix FIX-ROOT does not reconnect to router when disconnect reason is too many
2. Add API esp_mesh_print_scan_result
3. Modify not to reset mesh_xonseq of self and children when flush_upstream_packets
4. Fix not switch to a parent candidate which has the same layer and assoc as current parent
5. Fix not arm parent monitor when a parent candidate is cleared without sending an event to mesh layer
6. Fix the new voted root does not reconnect to router if rssi is weak
1. Add STA checks during STA PMF operations
2. Fix WPA2-Ent issue with Open AP
3. Skip WPA-TKIP profile if PMF is required
4. Skip & clear Supplicant PMK Cache with mismatching AP config
Rewrite ble dynamic prio to fix ble disconn in conn_param_update/channel_map_update
Rewrite ble dynamic prio in connection establishment
Fix ble dynamic prio with latency
Fix status bit set error when conn fail
- Simplify PHY access API
- Move coexist initializing and deinitializing out from PHY API
to Wi-Fi and Bluetooth
- Remove coexist pause and resume for they are no longer needed.
Note: besides the esp-netif component, this commit also disables
net_sockets.c from mbedtls, which is one of the base components and uses BSD API (not specifically lwIP). This might be refactored to use CONFIG_SUPPORT_BSD_API instead of CONFIG_ESP_NETIF_TCPIP_LWIP
in the future.
It also disables smartconfig_ack.c and wifi_init.c from esp_wifi
component for referencing some lwIP config options (smartconfig_ack.c changes might be also
updated to check CONFIG_SUPPORT_BSD_API)
Merges https://github.com/espressif/esp-idf/pull/5856
