This commit optimizes xTaskRemoveFromEventList() by removing the
listLIST_IS_EMPTY() check from single core builds. The scenario of the event
list being empty when the function is called can only occur on multi-core
builds.
This commit fixes and optimizes vTaskRemoveFromUnorderedEventList() in the
following ways:
- Fixed bug in single core builds where the unblocked task would be placed on
xPendingReadyList.
- If an ISR occurs while accessing xPendingReadyList, and the ISR also
accesses the xPendingReadyList, xPendingReadyList would be corrupted.
- In single core builds, this function is only called from event groups with
the scheduler suspended. Thus the function should have exclusive access to
pxReadyTasksLists instead of xPendingReadyList.
- The function's single core logic has now been updated to match upstream
behavior, by always placing the unblocked task on pxReadyTasksLists.
- Optimized the function for single core builds by removing the
taskCAN_BE_SCHEDULED() check.
- In single core builds, given that the function is always called with the
scheduler suspended
- Thus, the taskCAN_BE_SCHEDULED (and the subsequent routine to place the
unblocked task on the xPendingReadyList) is not necessary for single core
builds.
- The function now matches upstream behavior in single core builds.
Closes https://github.com/espressif/esp-idf/issues/11883
portBASE_TYPE is an internal macro defined by the porting layer. This commit
changes all references to BaseType_t which is the official type exposed by
FreeRTOS.
portSTACK_TYPE is an internal macro defined by the porting layer. This commit
changes all references to StackType_t which is the official type exposed by
FreeRTOS.
- add hardware stack guard based on assist-debug module
- enable hardware stack guard by default
- disable hardware stack guard for freertos ci.release test
- refactor rtos_int_enter/rtos_int_exit to change SP register inside them
- fix panic_reason.h header for RISC-V
- update docs to include information about the new feature
freertos: Updated vTaskRemoveFromUnorderedEventList() to consider scheduler state before adding task to ready list
Closes IDF-5785
See merge request espressif/esp-idf!23482
vTaskRemoveFromUnorderedEventList() runs under the assumption that the
scheduler is suspended during the call. However, for IDF FreeRTOS, this
is not true. When dual-core system is active, this API call is made in
a critical section but without suspending the scheduler. This commit
updates the vTaskRemoveFromUnorderedEventList() function to now consider
the scheduler state on either cores before adding a task to the ready list.
This commit fixes a bug in xTaskRemoveFromEvenetList() where in the
check for scheduler suspension did not account for nested suspensions.
Additionally, this commit updates all checks for scheduler
suspension to follow a uniform way.
* Added a POSIX/Linux simulator that is compatible with the Amazon
FreeRTOS SMP API. Note that the simulator itself is still
single core, like the IDF FreeRTOS POSIX/Linux simulator.
When porting an RTOS to the Xtensa architecture, there are a few files that
are common to all Xtensa RTOS ports. These files form the Xtensa RTOS porting
layer (e.g., "xtensa_vectors.S", "xtensa_context.S"). An Xtensa RTOS port is
expected to provide an RTOS specific "xtensa_rtos.h" header to interface with
the Xtensa RTOS porting layer.
Previously, the Xtensa RTOS porting layer files were placed in the FreeRTOS
component. This commit does the following:
1. Moves the Xtensa RTOS porting layer files from the `freertos` component to
the `xtensa` component. The following files were moved:
- xtensa_asm_utils.h
- xtensa_context.S
- xtensa_loadstore_handler.S
- xtensa_vectors.S
2. Refactored xtensa component include paths to separate Xtensa RTOS porting
layer headers.
- Xtensa HAL headers included via `#include <xtensa/...h>`
- Xtensa RTOS porting layer headers included via `#include <...h>`
Note: The xtensa files in the Amazon SMP FreeRTOS port are not moved/deleted in
this commit to ensure the moved files retain a clean diff history.
This commit merges the "FreeRTOSConfig_smp.h" file into the "FreeRTOSConfig.h".
The configurations for all FreeRTOS implementations are now stored in a single
file.
FromISR APIs would put an unblocked task on the pending ready list if
the scheduler is suspended on the current core, irrespective of the
task's core affinity and the state of the scheduler on the other core.
This commit updates this behavior by allowing tasks to get scheduled on
a core which has the scheduler running as long as the task's core
affinity allows it.
The default implementation of some xtensa vectors were previously moved to
"xtensa_vector_defaults.S" as weak functions so that they could be overriden.
This commit moves these default vectors back into "xtensa_vectors.S" in
preparation for further refactoring of the xtensa component.
This commit adds a common macro for the differing configASSERT() calls that
check if the scheduler is suspended outside a critical section. This macro
allows vanilla behavior to be restored for single core builds. Also added
comments explaining why xTaskGetSchedulerState() is called instead when
building for SMP.
Vanilla FreeRTOS expects applications to use one of the heap implementations
provided by FreeRTOS (i.e., heap_x.c), where functions such as pvPortMalloc()
and vPortFree() are defined in the heap implementation.
However, ESP-IDF already provides its own heap implementation
(i.e., esp_heap_caps.h). Thus, the pvPortMallc()/vPortFree() functions were
previously overriden by macro to call esp_heap functions directly.
This commit refactors the FreeRTOS port's heap as such:
- Added a heap_idf.c that implements all of the heap related functions required
by FreeRTOS source
- All dynamic memory allocated by FreeRTOS is from internal memory. Thus, the
FreeRTOS heap is the internal memory subset of the ESP-IDF heap.
- Removed some old macros to reduce diff from upstream source code.
Previously, IDF FreeRTOS would restrict the clean up of task memory (done by
vTaskDelete() or the Idle task) to only tasks pinned to the current core or
unpinned tasks. This was due to the need to clear the task's coprocessor
ownership on the other core (i.e., "_xt_coproc_owner_sa"). But this restriction
can be lifted by simply protecting access of "_xt_coproc_owner_sa" with a
spinlock.
This commit implements a "_xt_coproc_owner_sa_lock" to protect the access of
"_xt_coproc_owner_sa", thus vTaskDelete() and prvDeleteTCB() can now delete
tasks pinned to the other core so long as that task is not currently running.
Note: This fix was copied from the Xtensa port of Amazon SMP FreeRTOS
This commit removes the dependency on portUSING_MPU_WRAPPERS on the Xtensa port
of IDF FreeRTOS. This dependency was added due to a hack implemented in the
upstream port that required the usage of the "xMPUSettings" member of the TCB.
The "xMPUSettings" would be used as a pointer to the task's coprocessor save
area on the stack, even though FreeRTOS MPU support was not available.
The hack has now been removed, and the CPSA pointer is now calculated using
a combination of constant offsets values and the pxEndOfStack member of the
TCB.
Note: This impelemtation was copied from the Xtensa port of Amazon SMP FreeRTOS.
This commit refactors port_common.c so that it only contains implementation of
FreeRTOS port functions that are common to all FreeRTOS ports (i.e., on all
architectures and on all FreeRTOS implementations).
This commit refactors the OS startup functions as follows:
- Moved the OS/app startup functions listed below to "app_startup.c". Their
implementations are now common to all ports (RISC-V and Xtensa) of all
FreeRTOS implementations (IDF and Amazon SMP).
- esp_startup_start_app()
- esp_startup_start_app_other_cores()
- Removed esp_startup_start_app_common() as app startup functions are now
already common to all ports.
- Added extra logs to "main_task" to help with user debugging
Note: Increased startup delay on "unity_task". The "unity_run_menu()" is non
blocking, thus if the main task or other startup tasks have not been freed
by the time "unity_run_menu()" is run, those tasks will be freed the next time
"unity_task" blocks. This could cause some tests to have a memory leak, thus
the "unity_task" startup delay has increased.
FreeRTOS(IDF): Restore vanilla task selection algorithm if building for single core with optimized selection is disabled
See merge request espressif/esp-idf!21001
This commit restores the vanilla behavior for taskSELECT_HIGHEST_PRIORITY_TASK
when configNUM_CORES == 1 && configUSE_PORT_OPTIMISED_TASK_SELECTION == 0. This
results in the SMP selection algorithm (taskSelectHighestPriorityTaskSMP) to
only be run when configNUM_CORES > 1.
This commit adds preprocessing time checks to ensure that
- configNUM_CORES is defined to 1 or 2
- Incompatible configurations are not set depending on configNUM_CORES
Due to SMP, critical sections have been added to xTaskIncrementTick() and
vTaskSwitchContext() (to take the xKernelLock). However, this is technically
not necessary when building for single-core as FreeRTOS expect these funcitons
to be called with interrupts already disabled.
This commit makes the critical secitons in those functions depend on
"configNUM_CORES > 1", and ensures that interrupts are disabled when calling
those functions. This effectively restores the vanilla behavior for these
functions when building for single-core.
In IDF FreeRTOS, when building for SMP, there are numerous functions
which require different critical sections when compared to single-core. This
commit encapsulates those difference into a common set of macros whose
behavior depends on "configNUM_CORES > 1". As such...
- Vanilla behavior has been restored for some functions when building for
single core (i.e., used to call taskENTER_CRITICAL, now disables interrupts
mactching vanilla behavior).
- Reduces number of "#ifdef (configNUM_CORES > 1)" in functions
- Any SMP only critical sections are now wrapped by
"#ifdef (configNUM_CORES > 1)" and properly documented via comments.
This commit updates how configTHREAD_LOCAL_STORAGE_DELETE_CALLBACKS is defined
by default it to 0 if not defined elsewhere. Dependent code now check for
"configTHREAD_LOCAL_STORAGE_DELETE_CALLBACKS == 1" instead.
This commit synchronize the cosmetic differences of IDF FreeRTOS to upstream
Vanilla v10.4.3. Comsetic differences include:
- Out of date doxygen API descriptions
- Misnamed parameters
- Missing examples
- Fixed/added missing @cond/@code directives
- Extra/missing comments/lines
- Code formatting (uncrustify)
Other changes:
- Some ESP_PLATFORM directives were also removed
- xTaskIncrementTickOtherCores() now depends on "configNUM_CORES > 1"
- Updated some multi-core dummy variable names in FreeRTOS.h
This commit removes the updates the usage of queue locks in IDF FreeRTOS
Queue locks are present in Vanilla FreeRTOS to ensure that queue functions
behave deterministicly in critical sections (i.e., no walking linked lists
while interrupts are disabled). However, currently in IDF FreeRTOS...
- When configNUM_CORES > 1, IDF FreeRTOS drops the determinism requirement.
Thus, queue functions could be simplified if queue locks were not used at all
(and have a queue function do everything inside the same critical section).
- When configNUM_CORES == 1, the current queue implementation in IDF FreeRTOS
does not meet the determinism requirements, as critical sections are used
(instead of scheduler suspension) when locking/unlocking the queues.
There, this commit updates multiple queue functions so that
- When configNUM_CORES > 1
- Queue locks are no longer used. All actions are done within the same
critical section.
- Affected queue functions now need 40% less CPU clock cycles when blocking
- When configNUM_CORES = 1
- Queue locks are still used.
- Vanilla behavior of suspending the scheduler is restored when locking
the queue. Thus queue fucntions are now deterministic and have the same
behavior as Vanilla FreeRTOS.
- Affected queue functions now takes 36% more CPU clock cycles when
blocking (due to the scheduler suspension/resumption).
The following changes have been made in this commit:
1. configMINIMAL_STACK_SIZE is now defined as CONFIG_FREERTOS_IDLE_TASK_STACKSIZE.
2. Removed configIDLE_TASK_STACK_SIZE config as it was redundant.
3. Updates the order of allocating the TCB and stack memory to avoid the
stack memory overriding the TCB memory when the stack grows downwards.
4. CONFIG_FREERTOS_IDLE_TASK_STACKSIZE is now incorporated into the
FreeRTOSConfig_smp.h to configure the IDLE0 stack size.
This commit adds a copy of upstream vanilla FreeRTOS uncrustify.cfg files from
the following upstream commit:
89e4823a49
Note: "pp_indent_brace" is commented out as that was enabled after v10.4.3
Also also added a note in the ESP-IDF style guide aobut formatting FreeRTOS
source code using Uncrustify.
This commit refactors the way stream buffers initialize their spinlock.
- "prvInitialiseNewStreamBuffer()" now initializes the stream buffer fields
manually (instead of using memset()) to avoid resetting the spin lock
- Stream buffer creation functions now manually initialize the spinlock after
the other fields are initialized using "prvInitialiseNewStreamBuffer()"
Also added comments to event group spinlock initializtion.
The llvm asm pasrser doesn't support some gnu asm extensions,
like using "&" with macro arguments. So, replace such code with
code which could be compiled by llvm.
This commit fixes a bug where if an unpinned task is interrupted by a level 1
ISR that users the FPU, the FPU usage will cause the interrupted task to
become pinned to the current core.
Note: This bug was already fixed in SMP FreeRTOS in commit
d69361779e. This commit simply backports the
fix to IDF FreeRTOS.
This commit refactors the pxPortInitialiseStack() function of the riscv
FreeRTOS ports (both IDF and SMP FreeRTOS).
- Each stack area is now separated into their own functions
- Each function will individually
- Push the stack pointer to allocate the stack area
- Initiaze the allocated stack area
- Each stack area's size and usage is now clearly documented in code
This commit refactors the pxPortInitialiseStack() function of the xtensa
FreeRTOS ports (both IDF and SMP FreeRTOS).
- Each stack area is now separated into their own functions
- Each function will individually
- Push the stack pointer to allocate the stack area
- Initiaze the allocated stack area
- Each stack area's size and usage is now clearly documented in code
* Added port layer from the FreeRTOS POSIX port, added
additional port code for ESP-IDF.
* Created another hello world example using that POSIX
port in tools/test_apps.
* Removed old linux app
This commit synchronizes multiple functions in tasks.c with upstream v10.4.3
that contain minor differences.
The following functions have had their parameter names or code formatting
updated:
- xTaskCreateStaticPinnedToCore()
- xTaskCreatePinnedToCore()
- prvInitialiseNewTask()
- prvTaskIsTaskSuspended()
- vTaskStartScheduler()
- xTaskResumeAll()
- xTaskCheckForTimeOut()
- uxTaskResetEventItemValue()
The following functions have had their missing "xAlreadyYielded" restored
- xTaskDelayUntil()
- vTaskDelay()
The following functions have had their critical section/interrupt disdable
usage update
- vTaskSuspendAll()
- xTaskGetTickCountFromISR()
- xTaskGetApplicationTaskTagFromISR()
This commit synchronizes multiple functions that contain major differences with
upstream v10.4.3. Multi-core modifications are then reapplied to the function.
Vanilla code uses "pxTCB == pxCurrentTCB" to check whether a task is currently
running. This commit adds the following macros instead.
- taskIS_CURRENTLY_RUNNING()
- taskIS_CURRENTLY_RUNNING_ON_CORE()
The following functions have been updated to use those macros instead.
- eTaskGetState()
- vTaskPrioritySet()
- vTaskResume()
The following functions have been synchronized with upstream v10.4.3.
Multi-core modifications are then reapplied.
- vTaskSuspend()
- vTaskDelete()
- prvGetExpectedIdleTime()
This commit synchronizes multiple functions in queue.c with upstream v10.4.3.
Multi-core modifications are then reapplied to these functions. The following
functions were modified:
prvNotifyQueueSetContainer()
xQueueGenericCreateStatic()
xQueueGenericCreate()
xQueueGetMutexHolder()
xQueueCreateCountingSemaphoreStatic()
xQueueCreateCountingSemaphore()
xQueueGenericSend()
xQueueGenericSendFromISR()
xQueueReceiveFromISR()
uxQueueMessagesWaiting()
prvUnlockQueue()
prvIsQueueFull()
xQueueAddToSet()
xQueueRemoveFromSet()
prvNotifyQueueSetContainer()
Note: The SEGGER_SYSVIEW traceQUEUE_SEND() macro was updated as the
xCopyPosition argument is no longer available in scenarios where the
macro is called.
This commit fixes the function declaration naming from esprv_intc_set_threshold()
to esprv_intc_int_set_threshold(), thus allowing the underlying ROM funciton to be
exposed via the header.
This commit removes the riscv_interrupts.h header is it has become redundant. The previously
exposed API has been handled as follows:
- "riscv_interrupt_enable()" and "riscv_interrupt_disable()" have been removed. These functions
were declarations only and never had any implementation.
- "riscv_global_interrupts_enable()" and "riscv_global_interrupts_disable()" renamed to
"rv_utils_intr_global_enable()" and "rv_utils_intr_global_disable()" respectively and now
placed in rv_utils.h
ESP32-C2 has a single group timer, thus it will use it for the interrupt watchdog,
which is more critical than the task watchdog. The latter is implement in
software thanks to the `esp_timer`component.
This commit synchronizes multiple functions in tasks.c with upstream v10.4.3
that contain minor differences.
The following functions have had their parameter names or code formatting
updated:
- xTaskCreateStaticPinnedToCore()
- xTaskCreatePinnedToCore()
- prvInitialiseNewTask()
- prvTaskIsTaskSuspended()
- vTaskStartScheduler()
- xTaskResumeAll()
- xTaskCheckForTimeOut()
- uxTaskResetEventItemValue()
The following functions have had their missing "xAlreadyYielded" restored
- xTaskDelayUntil()
- vTaskDelay()
The following functions have had their critical section/interrupt disdable
usage update
- vTaskSuspendAll()
- xTaskGetTickCountFromISR()
- xTaskGetApplicationTaskTagFromISR()
This commit synchronizes multiple functions that contain major differences with
upstream v10.4.3. Multi-core modifications are then reapplied to the function.
Vanilla code uses "pxTCB == pxCurrentTCB" to check whether a task is currently
running. This commit adds the following macros instead.
- taskIS_CURRENTLY_RUNNING()
- taskIS_CURRENTLY_RUNNING_ON_CORE()
The following functions have been updated to use those macros instead.
- eTaskGetState()
- vTaskPrioritySet()
- vTaskResume()
The following functions have been synchronized with upstream v10.4.3.
Multi-core modifications are then reapplied.
- vTaskSuspend()
- vTaskDelete()
- prvGetExpectedIdleTime()
This commit synchronizes multiple functions in queue.c with upstream v10.4.3.
Multi-core modifications are then reapplied to these functions. The following
functions were modified:
prvNotifyQueueSetContainer()
xQueueGenericCreateStatic()
xQueueGenericCreate()
xQueueGetMutexHolder()
xQueueCreateCountingSemaphoreStatic()
xQueueCreateCountingSemaphore()
xQueueGenericSend()
xQueueGenericSendFromISR()
xQueueReceiveFromISR()
uxQueueMessagesWaiting()
prvUnlockQueue()
prvIsQueueFull()
xQueueAddToSet()
xQueueRemoveFromSet()
prvNotifyQueueSetContainer()
Note: The SEGGER_SYSVIEW traceQUEUE_SEND() macro was updated as the
xCopyPosition argument is no longer available in scenarios where the
macro is called.
This commit synchronizes the following xTaskRemoveFrom...EventList() with
upstream v10.4.3. Multi-core modifications are then reapplied to the
functions.
The functions updated are:
- xTaskRemoveFromEventList()
- vTaskRemoveFromUnorderedEventList()
The following multi-core macros have been removed as they are no longer
required.
- tskCAN_RUN_HERE()
- taskYIELD_OTHER_CORE()
This commit synchronizes the following vTaskPlaceOnEventList...() with
upstream v10.4.3.
The functions updated are:
- vTaskPlaceOnEventList()
- vTaskPlaceOnUnorderedEventList()
- vTaskPlaceOnEventListRestricted()
The traceTASK_DELAY_UNTIL() macro has also been updated.
This commit reverts the previous "taskENTER_CRTIICAL();" so that the argument
is now provided for better code readability. The names of the spinlocks have
also been updated.
This commit updates various FreeRTOS functions to call the newly added
prvCheckForYield() and prvCheckForYieldUsingPriority() when checking for
yielding. This allows the source code to match upstream more closely.
When a FreeRTOS function unblocks a task, that function will check whether
the unblocked task requires a yield to be called. This is currently done by
having each function individually check if the unblocked task has a higher
priority than the both cores, and yielding the appropriate core.
This commit adds the macros list below to abstract away the yielding checking
procedure. This will allow the code to match upstream more closely.
- prvCheckForYield()
- prvCheckForYieldUsingPriority()
Closes https://github.com/espressif/esp-idf/issues/7207
The description of how the xTaskGenericNotifyWait parameter is handled in the
xTaskGenericNotifyWait() function was inaccurate.
In this commit, the description was updated to match the implementation of xTaskGenericNotifyWait().
This commit marks all functions in interrupt_controller_hal.h, cpu_ll.h and cpu_hal.h as deprecated.
Users should use functions from esp_cpu.h instead.
This function removes the following legacy atomic CAS functions:
From compare_set.h (file removed):
- compare_and_set_native()
- compare_and_set_extram()
From portmacro.h
- uxPortCompareSet()
- uxPortCompareSetExtram()
Users should call esp_cpu_compare_and_set() instead as this function hides the details
of atomic CAS on internal and external RAM addresses.
Due to the removal of compare_set.h, some missing header includes are also fixed in this commit.
This commit fixes vTaskSuspendAll() and xTaskResumeAll() in the following ways.
- For vTaskSuspendAll()
- Sync function source code with upstream single core version
- Clearly mark IDF additions
- For xTaskResumeAll()
- Sync function source code with upstream single core version
- Clearly mark IDF additions
- Fix bug where cores other than core 0 were allowed to unwind pended ticks
This commit fixes the following issues:
- Clearly mark IDF additions in vTaskStepTick() and xTaskCatchUpTicks()
- Add back vTaskSuspendAll()/xTaskResumeAll() to xTaskCatchUpTicks(). Scheduler
suspension and resumption is required to unwind the pended ticks.
Previously, xTaskIncrementTick() would always trigger a yield (i.e., return pdTRUE)
when called on core 1. This would mean core 1 would call vTaskSwitchContext() on
every tick, leading to uneccesary CPU overhead.
This commit fixes xTaskIncrementTick() in the following ways:
- Clearly mark IDF additions in xTaskIncrementTick()
- Moved esp_vApplicationTickHook() to be called direclty in xPortSysTickHandler() in order to
simplify xTaskIncrementTick().
- Only core 0 calls xTaskIncrementTick() in order to simplify the function's logic. Core 0 is
solely responsible for managing xTickCount and xPendedTicks
- All other cores call xTaskIncrementTickOtherCores() instead which is a simplified version of
xTaskIncrementTick() and handles the following:
- Check if core 0 has unblocked a higher priority task to run
- Check if the current core requires time slicing
- Call vApplicationTickHook()
