morris
56a376c696
feat(esp_gdma): add hal interface for common operations
...
GDMA driver will be adapted to more DMA peripherals in the future.
This commit is to extract a minimal interface in the hal layer
2023-07-10 13:45:57 +08:00
Jin Chen
d918b5226c
Merge branch 'ble_dev/support_esp32h2_modem_clock_selection' into 'master'
...
ble: support esp32h2 modem clock selection
Closes EBLE50Y23-129
See merge request espressif/esp-idf!24387
2023-07-06 13:58:11 +08:00
cjin
3d2342df6c
ble: support esp32h2 modem clock selection
2023-07-03 16:05:42 +08:00
xiaqilin
59ffcd07d6
ieee802154: change BLE_BB/ieee802154_BB
2023-07-03 02:21:58 +00:00
xiaqilin
95afd4b9af
openthread: add openthread autostart for sleep device
2023-07-03 02:21:58 +00:00
xiaqilin
485a9d44cf
ieee802154: add sleep state
2023-07-03 02:21:58 +00:00
xiaqilin
dc4b3f24bc
ieee802154: support light sleep
2023-07-03 02:21:58 +00:00
Lou Tianhao
8457998505
Power Management: fix REGDMA power issue when TOP domain powered down during light sleep for esp32h2
2023-06-26 20:58:59 +08:00
Lou Tianhao
46cf3ecdc2
Power Management: support PAU REGDMA feature for esp32h2
2023-06-26 20:58:59 +08:00
Lou Tianhao
63d32ab620
Power Management: support DFS and PMU feature for esp32h2
2023-06-26 20:57:55 +08:00
wuzhenghui
4196eddff1
esp_hw_support: add modem module mac reset api
2023-06-19 12:53:09 +08:00
Island
81e418b1f2
Merge branch 'ble_dev/support_ble_light_sleep_using_extra_link' into 'master'
...
ESP32C6: Add BLE light sleep support using extra link
Closes IDF-6528
See merge request espressif/esp-idf!23720
2023-06-19 11:47:58 +08:00
cjin
d2d65a72a0
btbb: support register retention in esp32c6
2023-06-16 15:37:03 +08:00
cjin
f3457133f6
ble:added esp32c6 light sleep support
2023-06-16 15:37:03 +08:00
Song Ruo Jing
921713fff4
uart: Support LP_UART port with UART driver on esp32c6
2023-06-16 07:31:40 +00:00
Jakob Hasse
e87ac7255c
esp_hw_support: Added extern "C" declaration
2023-06-13 13:44:21 +02:00
laokaiyao
71ef56f988
gdma: support on_recv_done callback
2023-06-07 11:38:32 +08:00
xuxiao
722c60c14b
esp_wifi: itwt add setup timeout timer to track response frame
2023-06-02 21:10:32 +08:00
wuzhenghui
5c74093300
bugfix: treat too short sleep duration as sleep reject by software
2023-05-29 16:35:03 +08:00
Niklas Gürtler
be8a0d08f2
gdma: implement descriptor error callback
...
Merges https://github.com/espressif/esp-idf/pull/11499
2023-05-26 13:24:34 +08:00
laokaiyao
ffb40a89d9
adc_cali: supported channel compensation of adc calibration on esp32c6
2023-05-23 22:44:25 +08:00
Cao Sen Miao
e304db558b
temperature_sensor: Add new interface and reference counts so that phy and driver can use together
2023-05-17 17:40:59 +08:00
Li Shuai
87dd7bb51a
Merge branch 'bugfix/support_esp32c6_sleep_retention_extra_link' into 'master'
...
support extra linked list retention for BLE and 15.4
Closes IDF-6528
See merge request espressif/esp-idf!22985
2023-05-10 15:07:03 +08:00
Li Shuai
2e22491b02
sleep retention: implement the extra linked list retention for modules with retention clock bugs
2023-05-06 14:58:00 +08:00
Armando
8eec6558d1
mspi: refactor timing tuning driver to make it compatible with p4
2023-05-04 17:05:35 +08:00
Zim Kalinowski
4a647d08de
Merge branch 'feature/c6_ulp_sleep' into 'master'
...
ulp: added sleep support for lp core
Closes IDF-7012
See merge request espressif/esp-idf!23103
2023-04-25 22:40:52 +08:00
Song Ruo Jing
a4e8960ab4
esp_clk_tree: Rename clk_tree_xxx to esp_clk_tree_xxx, add compilation warning to clk_tree.h
2023-04-25 14:12:06 +08:00
Marius Vikhammer
359b237cc5
ulp: added sleep support for lp core
...
Added support for running LP core while hp core sleeps, as well
as waking up the hp core.
2023-04-25 11:51:35 +08:00
Li Shuai
94ebda298a
fix the issue of failure of receiving beacons in modem state caused by enabling light sleep in wifi min/max modem sleep mode
2023-04-07 05:57:15 +00:00
morris
6c19e7b8a7
gdma: avoid manually start/stop when channel is controled by ETM
2023-04-06 10:49:32 +08:00
morris
1429913042
gdma: support override default channel priority
2023-04-06 10:49:32 +08:00
Michael (XIAO Xufeng)
dbbc1ba5be
Merge branch 'feat/merge_nuttx_patch' into 'master'
...
G0, G1: fix issues that prevents using G0/G1 components on other platforms
See merge request espressif/esp-idf!22521
2023-03-21 20:48:21 +08:00
Kevin (Lao Kaiyao)
d659991bbb
Merge branch 'feature/gpio_runtime_preserve' into 'master'
...
gpio: support runtime reserve
Closes IDF-6731
See merge request espressif/esp-idf!22223
2023-03-18 10:55:44 +08:00
Jiang Jiang Jian
73c06b5039
Merge branch 'bugfix/sleep_current_issue_caused_by_sar_adc' into 'master'
...
sleep current issue caused by sar adc
Closes IDF-6111 and WIFI-4370
See merge request espressif/esp-idf!22769
2023-03-17 17:32:59 +08:00
Li Shuai
a25ce78392
sleep: fix sleep current issue caused by sar adc
2023-03-17 13:06:39 +08:00
laokaiyao
c9f780dc2e
gpio: support runtime preserve
2023-03-17 11:59:49 +08:00
Gustavo Henrique Nihei
459ebff4ff
esp_hw_support: Fix check for SOC_MODEM_CLOCK_IS_INDEPENDENT definition
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2023-03-16 01:50:22 +08:00
Mahavir Jain
891df4eff9
Cleanup soc_memprot_types.h for C6/H2
...
This header is not required as there is no PMS peripheral in C6/H2
Closes IDF-6332
2023-03-15 13:16:27 +05:30
jingli
cb0f517fe3
soc/soc_caps: update soc caps for chips that support power-down of modem hardware
...
Closes WIFI-4424
2023-03-10 14:15:27 +08:00
Li Shuai
1a10eabe41
Power Management: refactor the configuration of each module in sleep mode
2023-03-04 00:17:40 +08:00
Li Shuai
200f69e6eb
auto beacon: support esp32c6 autobeacon (advanced DTIM sleep feature)
...
modem retention: Support esp32c6 wifi MAC and baseband sleep retention
sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request
sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep
add i2c_ana master header file to project
auto beacon: release PMU's lock on root clock source (it is locked in the PLL)
wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL
clock, PMU will forcibly lock the root clock source as PLL, when the root
clock source of the software system is selected as PLL, we need to release
the root clock source locking.
When it is judged that the PLL is locked by PMU after wakeing up from the PMU
modem state, switch the root clock source to the PLL in the sleep process (a
critical section).
auto beacon: fix the failure to receive broadcast/multicast frames in modem state
When the multicast field in the beacon frame received in the PMU modem state is
True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to
stabilize and then restores the MAC context) and starts to receive
broadcast/multicast frames (Broadcast/Multicast frames will be sent after a
minimum delay of 48 us after the beacon frame), because the PMU waits for the HP
LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame
reception to be missed.
auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state
update Digital Peripheral (M2A switch) REGDMA restore time parameter
auto beacon: fix the issue that only channel 1 can connect to AP in modem state
2023-03-04 00:17:40 +08:00
Li Shuai
3a5fe2ab63
light sleep: rename sleep mac bb to modem, it includes MAC and baseband of wifi, bt and ieee802.15.4 modules
2023-03-04 00:17:40 +08:00
wuzhenghui
186da9af93
codeclean: rename sleep_periph to sleep_sys_periph
2023-03-04 00:17:40 +08:00
wuzhenghui
9eae151f7c
esp32c6: bringup deepsleep examples
2023-03-02 15:06:05 +08:00
wuzhenghui
d3ec7880fe
bugfix: support GPIO current leakage workaround for esp32c6/esp32h2
2023-03-02 15:06:05 +08:00
Song Ruo Jing
1a66459b44
usb_serial_jtag: Improve the code for the issue of usb cdc device unable to work during sleep
...
1. Remove RTC_CLOCK_BBPLL_POWER_ON_WITH_USB Kconfig option
During sleep, BBPLL clock always gets disabled
esp_restart does not disable BBPLL clock, so that first stage bootloader log can be printed
2. Add a new Kconfig option PM_NO_AUTO_LS_ON_USJ_CONNECTED
When this option is selected, IDF will constantly monitor USB CDC port connection status.
As long as it gets connected to a HOST, automatic light-sleep will not happen.
Closes https://github.com/espressif/esp-idf/issues/8507
2023-02-27 12:10:49 +08:00
Li Shuai
6e307c04a3
clock retention: supported soc and modem system power and clock sleep retention
2023-02-15 11:46:40 +08:00
fuzhibo@espressif.com
e252748d92
periph retention: runtime critical digital peripherals sleep retention support
2023-02-15 11:46:40 +08:00
Li Shuai
d097bbe40b
sleep retention: wraps the regdma link and hardware driver to provide system sleep retention (WiFi, BLE, 15.4 and digital peripheral) support
2023-02-15 11:46:40 +08:00
Li Shuai
8c18393d23
regdma: add regdma link operation api support
2023-02-15 11:46:36 +08:00