lwip was added to common requirements list to provide "sys/socket.h"
header to all components without additional requirements specified.
However, lwip pulls in a lot of dependencies on other components.
This commit removes lwip from common requirements to reduce the number
of components in G1-only apps.
To compensate for this removal, the following changes are made:
- newlib (which is a common requirement) has a public dependency on
lwip if lwip is present in the build. This ensures that sys/socket.h
is available as long as lwip component is included into the build.
- lwip is now a public requirement of esp-tls since esp_tls.h includes
sys/socket.h header.
- lwip is now a public requirement o esp_http_client because
sys/socket.h is included from esp_http_client.h
- lwip is now a private requirement of esp_wifi for "smartconfig_ack"
- lwip is now a private requirement of mqtt for socket functions
- lwip is now a public requirement of tcp_transport because
esp_transport_tcp.h includes sys/socket.h header.
- mbedtls checks if lwip component is present in the build. If yes,
net_sockets.c is added to the build, along with the dependency on
lwip. Previously lwip was a public requirement of mbedtls
unconditionally.
system/g1_components test app is updated to reflect the changes
Default public dependencies of a component before and after this
change, except common requirements:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
- vfs (public dependency of lwip)
- esp_wifi (public dependency of lwip)
- esp_event (public dependency of esp_wifi)
- esp_netif (public dependency of esp_event)
- esp_eth (public dependency of esp_netif)
- esp_phy (public dependency of esp_wifi)
After:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
Altogether, the following components have been always added as
public requirements to all other components, and are not added now
([breaking-change]):
- lwip
- vfs
- esp_wifi
- esp_event
- esp_netif
- esp_eth
- esp_phy
Application components now need to explicitly declare dependencies on
these components.
Some components were including esp_timer.h without declaring a
dependency on esp_timer component. This used to work due to a
transitive public dependency on esp_timer from freertos component.
Add explicit dependencies where needed.
Also some source files were using esp_timer functions without
including the header file. This used to work because esp_timer.h was
included from freertos port header file. This commit adds esp_timer.h
includes where needed.
Moved the following kconfig options out of the target component:
* CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
* ESP*_REV_MIN -> esp_hw_support
* ESP*_TIME_SYSCALL -> newlib
* ESP*_RTC_* -> esp_hw_support
Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
Also use `unsigned int`, `short unsigned int`,`long long unsigned int` etc types
instead of uintN_t. Because some platforms have uintN_t types that don't
conrrespont to built-in prototypes.
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
To make the transition from 32-bit time_t to 64-bit time_t smoother,
detect the size of this type in CMake and remove the manual option in
Kconfig.
The information about 64-bit time_t support is moved from Kconfig help
string into the "system time" section of the API reference.
The following files were deleted:
- components/esp_hw_support/include/soc/cpu.h
- components/soc/esp32s3/include/soc/cpu.h
The following functions are deprecated:
- get_sp()
The following functions declared in soc/cpu.h are now moved to esp_cpu.h:
- esp_cpu_configure_region_protection()
The following functions declared in soc/cpu.h are now moved to components/xtensa/include/esp_cpu_utils.h:
- esp_cpu_process_stack_pc()
All files with soc/cpu.h inclusion are updated to include esp_cpu.h instead.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
* Adds implementations of __{atomic,sync}_nand_fetch_n. These builtins
were implemented for other operations but were not defined for NAND.
* Adds implementation of __atomic_OP_fetch_n for all OPs.
* Adds implementation of __sync_OP_and_fetch_n for all OPs.
Reported in https://github.com/espressif/arduino-esp32/issues/5948
This commit removes the following critical nested macros as follows:
- portENTER_CRITICAL_NESTED()
- portEXIT_CRITICAL_NESTED()
They are replaced with portSET_INTERRUPT_MASK_FROM_ISR() and
portCLEAR_INTERRUPT_MASK_FROM_ISR() which are the proper FreeRTOS interfaces.
Created a portmacro_deprecated.h for each port to contain deprecated API
that were originally from portmacro.h
* CI errors led me to believe these were needed, but as it turns out the
load/store intrinsics are required even when idf is built by gcc when
linking to a clang based project.
* remove ... postfix inside `SYNC_LOCK_TEST_AND_SET` expansion
Provide emulated atomic load & store libcalls for u8, u16 & u32 integer
types. This is required when building with Clang as llvm does not lower
these operations to native load / stores, where as gcc does.
Provide `sync_lock_test_and_set` atomic implementations for all
supported integer types.
Closes https://github.com/espressif/esp-idf/issues/7591.
Closes https://github.com/espressif/esp-idf/issues/7592.
Add new Kconfig option to enable -msave-restore flag for RISC-V
targets. This option can be used to reduce binary size by replacing
inlined register save/restore sequences with library calls.
Since these functions receive the pointer to reent structure, they
should set errno in it rather than using thread-local errno.
This didn't cause practical issues because console functions in IDF
are only called from threads, and in that case 'r' is a pointer to
the thread-local structure, so &errno is the same thing as
&__errno_r(r). Still, fixing this for consistency.
When CONFIG_VFS_SUPPORT_IO is disabled, _read_r and _write_r
implementations in syscalls.c are used to provide console I/O via
esp_rom_uart_tx_one_char/esp_rom_uart_rx_one_char.
When newlib opens a (FILE*) stream, it calls fstat to check if the
underlying file is character-oriented. In this case, it configures the
stream to use line buffering. Otherwise (or if fstat fails) the stream
is opened as block buffered.
Since fstat wasn't provided, stdin/stdout/stderr streams got opened in
block buffered mode. For console, we need line buffered output so that
the stream buffer is flushed each time a complete line (ending with
'\n') is sent to stdout or stderr.
Fix by implementing _fstat_r stub, setting st->st_mdoe=S_IFCHR.
Before newlib 3.3.0, <dirent.h> bundled in newlib did not include any
function declarations. Instead, the file included the platform-
specific <sys/dirent.h>. This inclusion was inside a C++ guard block.
ESP-IDF provided sys/dirent.h inside newlib component, and this file
contained all the necessary function and structure declarations.
Since da418955f5,
common function declarations have been added to <dirent.h> in newlib.
However, the inclusion of sys/dirent.h has been moved out of the C++
guard block. However we didn't notice this change and did not update
sys/dirent.h in ESP-IDF newlib component to and the now-required
C++ guards there.
This commit adds the missing C++ guards to the platform-specific
sys/dirent.h.
The declarations of common dirent.h functions are now present both in
<dirent.h> (provided by newlib) and in sys/dirent.h (provided by IDF).
We keep the declarations in sys/dirent.h for compatibility, since some
ESP-IDF files and applications may include <sys/dirent.h> directly,
rather than <dirent.h>.
Closes https://github.com/espressif/esp-idf/issues/7204
Workaround libc can be moved to flash thanks to KConfig macros.
However, the following functions: `itoa`, `memcmp`, `memcpy`, `memset`, `strcat`, `strcmp`, and `strlen` are always kept it in IRAM.
