Commit Graph

2715 Commits

Author SHA1 Message Date
XiaXiaotian
9d8425bd72 put RODATA of libphy.a into DRAM
There are some RODATAs of libphy.a that are called in ISR. So need
    to put them into DRAM to avoid access them when R/W SPI flash. Due
    to the RODATAs which are called in ISR haven't been picked out to
    put into DRAM, put all of the RODATA of libphy.a into DRAM. This
    will be optimized in the future.
2017-04-24 11:22:49 +08:00
Ivan Grokhotkov
af6f3bffab Merge branch 'feature/esp32_wdt_rst_info' into 'master'
esp32: Added dumping debug info from traceport upon reset by any WDT

Adds ability to dump debug info (PC and internal processor state) from traceport upon reset by any WDT.

See merge request !654
2017-04-24 10:32:16 +08:00
Alexey Gerenkov
77a92e6dcc esp32: Added dumping info from traceport upon reset by any WDT
- Last PC info and waiti mode indication are printed for both CPUs
 - Raw traceport regs values are printed only for log levels higher than DEBUG
2017-04-23 22:07:56 +03:00
Yulong
2cfde4dfd9 compoent/bt:change the code style 2017-04-23 05:52:18 -04:00
Yulong
1016ab1c2a component/bt:separate the smp_br_connect_callback from the BLE only mode 2017-04-23 00:48:23 -04:00
Ivan Grokhotkov
404e89da4d Merge branch 'bugfix/rtc_reg_fields' into 'master'
soc: allow REG_SET_FIELD to be used for bit fields

- Fixes an issue with `rtc_clk_apll_enable`: https://esp32.com/viewtopic.php?f=13&t=1673
- Fixes `rtc_clk_fast_freq_set` function always selecting XTAL/4 as fast clock source.
- Fixes regression in deep sleep current (7uA instead of 5uA).

See merge request !674
2017-04-21 19:40:45 +08:00
Ivan Grokhotkov
8399ed900a Merge branch 'bugfix/xtal_freq_after_wdt_reset' into 'master'
rtc_clk_init: handle case when XTAL frequency has already been set

On first reset, ROM code writes the estimated XTAL frequency into
RTC_APB_FREQ_REG (aka STORE5). If the application doesn’t specify exact
XTAL frequency (which is always the case for now), rtc_clk_init will
guess what kind of XTAL is used (26M or 40M), based on the estimated
frequency. Later, detected frequency is written into RTC_XTAL_FREQ_REG
(aka STORE4).

When the application switches clock source to PLL, APB frequency changes
and RTC_APB_FREQ_REG is updated. If the application encounters an RTC
WDT reset, RTC_APB_FREQ_REG will not be updated prior to reset. Once the
application starts up again, it will attempt to auto-detect XTAL
frequency based on RTC_APB_FREQ_REG, which now has value of 80000000.
This will fail, and rtc_clk_xtal_freq_estimate will fall back to the
default value of 26 MHz. Due to an incorrect XTAL frequency, PLL
initialization will also take incorrect path, and PLL will run at a
different frequency. Depending on the application this may cause just
garbage output on UART or a crash (if WiFi is used).

This change checks if RTC_XTAL_FREQ_REG has already been set before trying
to estimate XTAL frequency based on the value of RTC_APB_FREQ_REG, and
uses RTC_XTAL_FREQ_REG value if it is valid.

Fixes TW11738.

See merge request !691
2017-04-21 19:38:46 +08:00
XiaXiaotian
b238bc691d Do not put the whole object files into IRAM. Add attributes to the functions called in ISR instead. 2017-04-21 15:38:01 +08:00
XiaXiaotian
5553fbd537 add base MAC address storage choice.
Base MAC address can be stored in default manufacture-defined or customer
    pre-defined place in EFUSE and other place e.g. flash or EEPROM.
    If choose to use base MAC address which is stored in other place, please
    call esp_base_mac_addr_set_external() before initializing WiFi/BT/Ehternet.
2017-04-21 14:55:11 +08:00
Yulong
b5989a6b26 component/bt:Recovery the btm_establish_continue when created the acl connection 2017-04-21 02:43:35 -04:00
Angus Gratton
fa3120cb40 PPPoS example: Move pin configuration to menuconfig, add log statement
Also remove spurious infinite loop in app_main()
2017-04-21 14:29:16 +10:00
Angus Gratton
fd3ef4cdfe Merge branch 'bugfix/github_fixes' into 'master'
Various fixes from Github

Some one-line fixes from Github PRs.

See merge request !689
2017-04-21 12:27:32 +08:00
Angus Gratton
94a61389ff Merge branch 'bugfix/driver_const_params' into 'master'
components/driver: 'const' all config calls.

Merges PR #519 https://github.com/espressif/esp-idf/pull/519

See merge request !687
2017-04-21 12:25:15 +08:00
Angus Gratton
2c17b16328 Merge branch 'bugfix/mbedtls_wrong_errno' into 'master'
mbedtls port: Fix detection of EWOULDBLOCK/EAGAIN with non-blocking sockets

Since mbedtls_net_errno is reset by fcntl, it is reset after calling
net_would_block, so the call to mbedtls_net_errno in mbedtls_net_recv
and mbedtls_net_send will always get back 0. This change propagates
the value returned by mbedtls_net_errno up through net_would_block,
to allow the correct error value to be used and avoid a redundant
call to mbedtls_net_errno.

Merges PR #511 https://github.com/espressif/esp-idf/pull/511

See merge request !688
2017-04-21 12:24:59 +08:00
Angus Gratton
f3a567b65d PPPoS: Rearrange config items (move TCP/IP stack size to LWIP), mark as experimental/unsupported
Ref #272
2017-04-21 14:23:34 +10:00
Adrian Muzyka
47c722d674 Enable lwip PPPoS support
* Fix some lwip api bugs
 * Added PPP_SUPPORT parameter to lwip Kconfig
 * Added example pppos_client

Merges #272 https://github.com/espressif/esp-idf/pull/272
2017-04-21 14:23:34 +10:00
Liu Zhi Fu
561a1a64f2 esp32: update wifi lib for limitting dynamic wifi buffer
Add limit for all dynamic wifi ebuf to avoid wifi run out of memory in some extreme scanrio
2017-04-21 10:38:00 +08:00
Ivan Grokhotkov
6e9d60ef70 rtc_clk_init: handle case when XTAL frequency has already been set
On first reset, ROM code writes the estimated XTAL frequency into
RTC_APB_FREQ_REG (aka STORE5). If the application doesn’t specify exact
XTAL frequency (which is always the case for now), rtc_clk_init will
guess what kind of XTAL is used (26M or 40M), based on the estimated
frequency. Later, detected frequency is written into RTC_XTAL_FREQ_REG
(aka STORE4).

When the application switches clock source to PLL, APB frequency changes
and RTC_APB_FREQ_REG is updated. If the application encounters an RTC
WDT reset, RTC_APB_FREQ_REG will not be updated prior to reset. Once the
application starts up again, it will attempt to auto-detect XTAL
frequency based on RTC_APB_FREQ_REG, which now has value of 80000000.
This will fail, and rtc_clk_xtal_freq_estimate will fall back to the
default value of 26 MHz. Due to an incorrect XTAL frequency, PLL
initialization will also take incorrect path, and PLL will run at a
different frequency. Depending on the application this may cause just
garbage output on UART or a crash (if WiFi is used).
2017-04-21 10:33:58 +08:00
Angus Gratton
52c378b447 bluedroid: Fix compilation warnings related to aliasing
Merges PR #518 https://github.com/espressif/esp-idf/pull/518
2017-04-21 11:31:40 +10:00
Eyob
cdc7396f97 Make sure LD -L option is calculated correctly when the project Makefile has specified SRCDIRS components that are not directly below Makefile folder level.
For example,
SRCDIRS = comp_a  happy/comp_b  /c/dev/comp_c

Then the following are built:
build/comp_a/libcomp_a.a
build/comp_b/libcomp_b.a
build/comp_c/libcomp_c.a

But when LD is run the -L is calculated as follows
-L build/comp_a
-L build/happy/comp_b
-L build//c/dev/comp_c

This means comp_b and comp_c are not found by LD. With this change set -L is calculated correctly for comp_b and comp_c

Merges #504 https://github.com/espressif/esp-idf/pull/504
2017-04-21 11:03:07 +10:00
rudi ;-)
e5012bd07e OTA example readme: [typo]: Worflow to Workflow
Merges PR #507 https://github.com/espressif/esp-idf/pull/507
2017-04-21 11:03:07 +10:00
Michael Kellner
eeb0aaa09e spidriver: Display length errors correctly
SPI transfer length is bits, not bytes, so the error should indicate bits. Also, there are separate lengths for rx and
tx (confusingly named rxlength and length... if rxlength is 0, length is used). The code checks the tx length for the
rx, so it never validates rxlength.

Originally contributed as part of #511 https://github.com/espressif/esp-idf/pull/511
2017-04-21 11:03:07 +10:00
Jonathan Kaufmann
bf82b441ae Fixed bug in ledc_set_fade_with_step where returned while holding critical section.
Merges PR #515 https://github.com/espressif/esp-idf/pull/515
2017-04-21 11:03:07 +10:00
Michael Kellner
a523aa3ef5 mbedtls port: Fix detection of EWOULDBLOCK/EAGAIN with non-blocking sockets
Since mbedtls_net_errno is reset by fcntl, it is reset after calling
net_would_block, so the call to mbedtls_net_errno in mbedtls_net_recv
and mbedtls_net_send will always get back 0. This change propagates
the value returned by mbedtls_net_errno up through net_would_block,
to allow the correct error value to be used and avoid a redundant
call to mbedtls_net_errno.

Merges PR #511 https://github.com/espressif/esp-idf/pull/511
2017-04-21 10:46:34 +10:00
Yulong
bc807a18d1 component/bt:Finish all the separate code from BT & BLE 2017-04-20 07:18:05 -04:00
Angus Gratton
abe58c867e Ethernet example: Add README, use menuconfig for all example pin assignments 2017-04-20 18:03:00 +10:00
Angus Gratton
453b5ded1d ethernet: Add convenience functions esp_eth_smi_wait_value() & esp_eth_smi_wait_set()
Covers the common case of waiting for a particular PHY register to have a particular value.
2017-04-20 18:03:00 +10:00
Angus Gratton
453722ba54 ethernet: Refactor PHY support to be part of ethernet component
Move generic PHY support into its own interface
2017-04-20 18:03:00 +10:00
Robin Cutshaw
5d6e6f79b9 examples/ethernet: Add LAN8720 phy support
Merges #383 https://github.com/espressif/esp-idf/pull/383
2017-04-20 18:03:00 +10:00
Ivan Grokhotkov
793003d0fa Merge branch 'bugfix/ci_ssc_build_nonverbose' into 'master'
ci: Build SSC with V=0

BATCH_BUILD implies V=1, but SSC produces a *lot* of log output in verbose mode.

See merge request !682
2017-04-20 15:12:38 +08:00
Angus Gratton
7b0e6e2fc4 ci: Build with V=0
BATCH_BUILD implies V=1, but SSC produces a *lot* of log output in verbose mode.

For now, disable setting V=1 for all CI build modes.
2017-04-20 13:58:30 +10:00
Yulong
67863ec495 component/bt:Added the GATTS_INCLUDED macro to the bta layer 2017-04-19 08:06:38 -04:00
Liu Zhi Fu
ab37f89f55 lwip: fix tcp stable test abort issue
1. Modify dhcp server timer to 1 seconds
2. Enable ETHARP_TRUST_IP_MAC

modify according to review
2017-04-19 17:39:32 +08:00
Yulong
2723504473 add the GATTC_INCLUDED marco to close the bta_gattc module when not used the GATTC 2017-04-19 05:16:24 -04:00
Yulong
0ddadc98a3 separate the btm layer from SMP security 2017-04-19 03:44:01 -04:00
Ivan Grokhotkov
8f02730e1f fat/sdmmc: unmount FATFS object on error
Failure to call f_mount(NULL,...) makes FATFS attempt to clean up the old
FS object upon next mount. If previous mount operation has failed, some
parts of FS object may not be fully initialized, which will cause errors
(such as attempting to delete a mutex which wasn’t allocated).
2017-04-19 15:03:30 +08:00
Jiang Jiang Jian
29b32be97c Merge branch 'bugfix/tw11779_softAP_crash_when_wifi_connect' into 'master'
esp32: update wifi lib to fix wifi connect cause crash

Fix softap wifi connect crash bug

See merge request !672
2017-04-19 14:34:53 +08:00
Ivan Grokhotkov
49848eaed5 sdmmc: handle card removal when CD is not used
When SD card is removed during transaction, SDMMC peripheral can report
a range of errors, such as timeouts, CRC errors, start/end bit errors.
Under normal conditions (card is inserted), SDMMC peripheral also generates
command done or data done interrupts. When the card is removed, such
interrupts may not be always generated.

This change fixes handling of timeout interrupts and SBE interrupts.
It also adds a one second timeout into the event processing loop. This
timeout allows applications to recover in cases when the SDMMC peripheral
doesn’t generate command/data done event on card removal.
2017-04-19 12:50:51 +08:00
Jeroen Domburg
b209c6dcbb Make internal stack size variables in FreeRTOS 32-bit instead of 16-bit 2017-04-19 10:47:19 +08:00
Yulong
65ff8bd160 l2cap can send data to low layer when close the classic bt. 2017-04-18 05:42:55 -04:00
Ivan Grokhotkov
5d1bb42c18 soc: allow REG_SET_FIELD to be used with single-bit fields 2017-04-18 17:34:26 +08:00
Ivan Grokhotkov
faaf59ccb3 soc: define missing M, V macros for nrx, bb, fe, emac, iomux
Recipe:
- Add _M and _V for single-bit fields
  Search: (#define (\w+)\s*(\(BIT\(\d+\)\)))
  Replace: \1\n#define \2_M \3\n#define \2_V 1

- Add _M and _V for multi-bit fields
  Search: (#define (\w+)\s*(0x[\dA-Fa-f]+))
  Replace: \1\n#define \2_M (\2_V << \2_S)\n#define \2_V \3
2017-04-18 17:34:26 +08:00
chenyudong
85f75f1ccd tcp_udp_perf: add license and modify some details 2017-04-18 15:23:28 +08:00
Jeroen Domburg
f73c6f875c Merge branch 'bugfix/dont_log_before_bss_inited' into 'master'
Remove ESP_EARLY_LOGI before bss is initialized; it crashes the CPU

There's an ESP_EARLY_LOGI line that can get called before the BSS is initialized; the early logging code doesn't cope well with that: it checks if FreeRTOS is up, but the variables it uses for that contains garbage because it isn't cleared yet, giving the wrong result. The logging code then tries to set a mux, crashing the entire system. This patch removes the log line and adds a warning at the BSS initialization line not to do anything complex before that point.

Fixes https://github.com/espressif/esp-idf/issues/523

See merge request !671
2017-04-18 11:21:31 +08:00
Yulong
22ccf6c368 component/bt:rebase the BT_BLE_separate to the new master 2017-04-17 22:53:43 -04:00
Ivan Grokhotkov
c04e4f179f Merge branch 'feature/log_via_apptrace' into 'master'
Apptrace interface and logging via apptrace

- adds apptrace module which allows arbitrary data to be sent to host over JTAG
- implements printf-like logging to host via apptrace module

This feature depends on changes in idf/openocd-esp32!2

See merge request !548
2017-04-18 10:45:14 +08:00
Asuki Kono
a797dca528 Replace to strncmp from strcmp to check device_name on examples/bluetooth/gatt_client
(Amended slightly from version in https://github.com/espressif/esp-idf/pull/502 to
account for differences when adv_name is a prefix of device_name.)
2017-04-18 10:29:36 +10:00
Alexey Gerenkov
55f1a63faf esp32: Adds functionality for application tracing over JTAG
- Implements application tracing module which allows to send arbitrary
   data to host over JTAG. This feature is useful for analyzing
   program modules behavior, dumping run-time application data etc.
 - Implements printf-like logging functions on top of apptrace module.
   This feature is a kind of semihosted printf functionality with lower
   overhead and impact on system behaviour as compared to standard printf.
2017-04-17 23:26:29 +03:00
Ivan Grokhotkov
ad50a70440 fix test for dumping trace data 2017-04-17 22:19:14 +03:00
Ivan Grokhotkov
639557d975 trace: add Kconfig options for app level trace
CONFIG_MEMMAP_TRACEMEM is now a hidden underlying option, which can be enabled using either CONFIG_ESP32_TRAX or CONFIG_ESP32_APP_TRACE
2017-04-17 22:19:14 +03:00