esp-idf/components/esp_eth/include/esp_eth_mac.h

594 lines
20 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2019-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
2019-04-10 04:24:50 -04:00
#pragma once
#include <stdbool.h>
#include "esp_eth_com.h"
#include "sdkconfig.h"
#if CONFIG_ETH_USE_SPI_ETHERNET
#include "driver/spi_master.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
2019-04-10 04:24:50 -04:00
/**
* @brief Ethernet MAC
*
*/
typedef struct esp_eth_mac_s esp_eth_mac_t;
/**
* @brief Ethernet MAC
*
*/
struct esp_eth_mac_s {
/**
* @brief Set mediator for Ethernet MAC
*
* @param[in] mac: Ethernet MAC instance
* @param[in] eth: Ethernet mediator
*
* @return
* - ESP_OK: set mediator for Ethernet MAC successfully
* - ESP_ERR_INVALID_ARG: set mediator for Ethernet MAC failed because of invalid argument
*
*/
esp_err_t (*set_mediator)(esp_eth_mac_t *mac, esp_eth_mediator_t *eth);
/**
* @brief Initialize Ethernet MAC
*
* @param[in] mac: Ethernet MAC instance
*
* @return
* - ESP_OK: initialize Ethernet MAC successfully
* - ESP_ERR_TIMEOUT: initialize Ethernet MAC failed because of timeout
* - ESP_FAIL: initialize Ethernet MAC failed because some other error occurred
*
*/
esp_err_t (*init)(esp_eth_mac_t *mac);
/**
* @brief Deinitialize Ethernet MAC
*
* @param[in] mac: Ethernet MAC instance
*
* @return
* - ESP_OK: deinitialize Ethernet MAC successfully
* - ESP_FAIL: deinitialize Ethernet MAC failed because some error occurred
*
*/
esp_err_t (*deinit)(esp_eth_mac_t *mac);
/**
* @brief Start Ethernet MAC
*
* @param[in] mac: Ethernet MAC instance
*
* @return
* - ESP_OK: start Ethernet MAC successfully
* - ESP_FAIL: start Ethernet MAC failed because some other error occurred
*
*/
esp_err_t (*start)(esp_eth_mac_t *mac);
/**
* @brief Stop Ethernet MAC
*
* @param[in] mac: Ethernet MAC instance
*
* @return
* - ESP_OK: stop Ethernet MAC successfully
* - ESP_FAIL: stop Ethernet MAC failed because some error occurred
*
*/
esp_err_t (*stop)(esp_eth_mac_t *mac);
2019-04-10 04:24:50 -04:00
/**
* @brief Transmit packet from Ethernet MAC
*
* @param[in] mac: Ethernet MAC instance
* @param[in] buf: packet buffer to transmit
* @param[in] length: length of packet
*
* @return
* - ESP_OK: transmit packet successfully
* - ESP_ERR_INVALID_SIZE: number of actually sent bytes differs to expected
2019-04-10 04:24:50 -04:00
* - ESP_FAIL: transmit packet failed because some other error occurred
*
* @note Returned error codes may differ for each specific MAC chip.
*
2019-04-10 04:24:50 -04:00
*/
esp_err_t (*transmit)(esp_eth_mac_t *mac, uint8_t *buf, uint32_t length);
/**
* @brief Transmit packet from Ethernet MAC constructed with special parameters at Layer2.
*
* @param[in] mac: Ethernet MAC instance
* @param[in] argc: number variable arguments
* @param[in] args: variable arguments
*
* @note Typical intended use case is to make possible to construct a frame from multiple higher layer
* buffers without a need of buffer reallocations. However, other use cases are not limited.
*
* @return
* - ESP_OK: transmit packet successfully
* - ESP_ERR_INVALID_SIZE: number of actually sent bytes differs to expected
* - ESP_FAIL: transmit packet failed because some other error occurred
*
* @note Returned error codes may differ for each specific MAC chip.
*
*/
esp_err_t (*transmit_vargs)(esp_eth_mac_t *mac, uint32_t argc, va_list args);
2019-04-10 04:24:50 -04:00
/**
* @brief Receive packet from Ethernet MAC
*
* @param[in] mac: Ethernet MAC instance
* @param[out] buf: packet buffer which will preserve the received frame
* @param[out] length: length of the received packet
*
* @note Memory of buf is allocated in the Layer2, make sure it get free after process.
* @note Before this function got invoked, the value of "length" should set by user, equals the size of buffer.
* After the function returned, the value of "length" means the real length of received data.
2019-04-10 04:24:50 -04:00
*
* @return
* - ESP_OK: receive packet successfully
* - ESP_ERR_INVALID_ARG: receive packet failed because of invalid argument
* - ESP_ERR_INVALID_SIZE: input buffer size is not enough to hold the incoming data.
* in this case, value of returned "length" indicates the real size of incoming data.
2019-04-10 04:24:50 -04:00
* - ESP_FAIL: receive packet failed because some other error occurred
*
*/
esp_err_t (*receive)(esp_eth_mac_t *mac, uint8_t *buf, uint32_t *length);
/**
* @brief Read PHY register
*
* @param[in] mac: Ethernet MAC instance
* @param[in] phy_addr: PHY chip address (0~31)
* @param[in] phy_reg: PHY register index code
* @param[out] reg_value: PHY register value
*
* @return
* - ESP_OK: read PHY register successfully
* - ESP_ERR_INVALID_ARG: read PHY register failed because of invalid argument
* - ESP_ERR_INVALID_STATE: read PHY register failed because of wrong state of MAC
* - ESP_ERR_TIMEOUT: read PHY register failed because of timeout
2019-04-10 04:24:50 -04:00
* - ESP_FAIL: read PHY register failed because some other error occurred
*
*/
esp_err_t (*read_phy_reg)(esp_eth_mac_t *mac, uint32_t phy_addr, uint32_t phy_reg, uint32_t *reg_value);
/**
* @brief Write PHY register
*
* @param[in] mac: Ethernet MAC instance
* @param[in] phy_addr: PHY chip address (0~31)
* @param[in] phy_reg: PHY register index code
* @param[in] reg_value: PHY register value
*
* @return
* - ESP_OK: write PHY register successfully
* - ESP_ERR_INVALID_STATE: write PHY register failed because of wrong state of MAC
* - ESP_ERR_TIMEOUT: write PHY register failed because of timeout
2019-04-10 04:24:50 -04:00
* - ESP_FAIL: write PHY register failed because some other error occurred
*
*/
esp_err_t (*write_phy_reg)(esp_eth_mac_t *mac, uint32_t phy_addr, uint32_t phy_reg, uint32_t reg_value);
/**
* @brief Set MAC address
*
* @param[in] mac: Ethernet MAC instance
* @param[in] addr: MAC address
*
* @return
* - ESP_OK: set MAC address successfully
* - ESP_ERR_INVALID_ARG: set MAC address failed because of invalid argument
* - ESP_FAIL: set MAC address failed because some other error occurred
*
*/
esp_err_t (*set_addr)(esp_eth_mac_t *mac, uint8_t *addr);
/**
* @brief Get MAC address
*
* @param[in] mac: Ethernet MAC instance
* @param[out] addr: MAC address
*
* @return
* - ESP_OK: get MAC address successfully
* - ESP_ERR_INVALID_ARG: get MAC address failed because of invalid argument
* - ESP_FAIL: get MAC address failed because some other error occurred
*
*/
esp_err_t (*get_addr)(esp_eth_mac_t *mac, uint8_t *addr);
/**
* @brief Set speed of MAC
*
* @param[in] ma:c Ethernet MAC instance
* @param[in] speed: MAC speed
*
* @return
* - ESP_OK: set MAC speed successfully
* - ESP_ERR_INVALID_ARG: set MAC speed failed because of invalid argument
* - ESP_FAIL: set MAC speed failed because some other error occurred
*
*/
esp_err_t (*set_speed)(esp_eth_mac_t *mac, eth_speed_t speed);
/**
* @brief Set duplex mode of MAC
*
* @param[in] mac: Ethernet MAC instance
* @param[in] duplex: MAC duplex
*
* @return
* - ESP_OK: set MAC duplex mode successfully
* - ESP_ERR_INVALID_ARG: set MAC duplex failed because of invalid argument
* - ESP_FAIL: set MAC duplex failed because some other error occurred
*
*/
esp_err_t (*set_duplex)(esp_eth_mac_t *mac, eth_duplex_t duplex);
/**
* @brief Set link status of MAC
*
* @param[in] mac: Ethernet MAC instance
* @param[in] link: Link status
*
* @return
* - ESP_OK: set link status successfully
* - ESP_ERR_INVALID_ARG: set link status failed because of invalid argument
* - ESP_FAIL: set link status failed because some other error occurred
*
*/
esp_err_t (*set_link)(esp_eth_mac_t *mac, eth_link_t link);
/**
* @brief Set promiscuous of MAC
*
* @param[in] mac: Ethernet MAC instance
* @param[in] enable: set true to enable promiscuous mode; set false to disable promiscuous mode
*
* @return
* - ESP_OK: set promiscuous mode successfully
* - ESP_FAIL: set promiscuous mode failed because some error occurred
*
*/
esp_err_t (*set_promiscuous)(esp_eth_mac_t *mac, bool enable);
/**
* @brief Enable flow control on MAC layer or not
*
* @param[in] mac: Ethernet MAC instance
* @param[in] enable: set true to enable flow control; set false to disable flow control
*
* @return
* - ESP_OK: set flow control successfully
* - ESP_FAIL: set flow control failed because some error occurred
*
*/
esp_err_t (*enable_flow_ctrl)(esp_eth_mac_t *mac, bool enable);
/**
* @brief Set the PAUSE ability of peer node
*
* @param[in] mac: Ethernet MAC instance
* @param[in] ability: zero indicates that pause function is supported by link partner; non-zero indicates that pause function is not supported by link partner
*
* @return
* - ESP_OK: set peer pause ability successfully
* - ESP_FAIL: set peer pause ability failed because some error occurred
*/
esp_err_t (*set_peer_pause_ability)(esp_eth_mac_t *mac, uint32_t ability);
/**
* @brief Custom IO function of MAC driver. This function is intended to extend common options of esp_eth_ioctl to cover specifics of MAC chip.
*
* @note This function may not be assigned when the MAC chip supports only most common set of configuration options.
*
* @param[in] mac: Ethernet MAC instance
* @param[in] cmd: IO control command
* @param[in, out] data: address of data for `set` command or address where to store the data when used with `get` command
*
* @return
* - ESP_OK: process io command successfully
* - ESP_ERR_INVALID_ARG: process io command failed because of some invalid argument
* - ESP_FAIL: process io command failed because some other error occurred
* - ESP_ERR_NOT_SUPPORTED: requested feature is not supported
*/
esp_err_t (*custom_ioctl)(esp_eth_mac_t *mac, uint32_t cmd, void *data);
2019-04-10 04:24:50 -04:00
/**
* @brief Free memory of Ethernet MAC
*
* @param[in] mac: Ethernet MAC instance
*
* @return
* - ESP_OK: free Ethernet MAC instance successfully
* - ESP_FAIL: free Ethernet MAC instance failed because some error occurred
*
*/
esp_err_t (*del)(esp_eth_mac_t *mac);
};
/**
* @brief RMII Clock Mode Options
*
*/
typedef enum {
/**
* @brief Default values configured using Kconfig are going to be used when "Default" selected.
*
*/
EMAC_CLK_DEFAULT,
/**
* @brief Input RMII Clock from external. EMAC Clock GPIO number needs to be configured when this option is selected.
*
* @note MAC will get RMII clock from outside. Note that ESP32 only supports GPIO0 to input the RMII clock.
*
*/
EMAC_CLK_EXT_IN,
/**
* @brief Output RMII Clock from internal APLL Clock. EMAC Clock GPIO number needs to be configured when this option is selected.
*
*/
EMAC_CLK_OUT
} emac_rmii_clock_mode_t;
/**
* @brief RMII Clock GPIO number Options
*
*/
typedef enum {
/**
* @brief MAC will get RMII clock from outside at this GPIO.
*
* @note ESP32 only supports GPIO0 to input the RMII clock.
*
*/
EMAC_CLK_IN_GPIO = 0,
/**
* @brief Output RMII Clock from internal APLL Clock available at GPIO0
*
* @note GPIO0 can be set to output a pre-divided PLL clock (test only!). Enabling this option will configure GPIO0 to output a 50MHz clock.
* In fact this clock doesnt have directly relationship with EMAC peripheral. Sometimes this clock wont work well with your PHY chip.
* You might need to add some extra devices after GPIO0 (e.g. inverter). Note that outputting RMII clock on GPIO0 is an experimental practice.
* If you want the Ethernet to work with WiFi, dont select GPIO0 output mode for stability.
*
*/
EMAC_APPL_CLK_OUT_GPIO = 0,
/**
* @brief Output RMII Clock from internal APLL Clock available at GPIO16
*
*/
EMAC_CLK_OUT_GPIO = 16,
/**
* @brief Inverted Output RMII Clock from internal APLL Clock available at GPIO17
*
*/
EMAC_CLK_OUT_180_GPIO = 17
} emac_rmii_clock_gpio_t;
/**
* @brief Ethernet MAC Clock Configuration
*
*/
typedef union {
struct {
// MII interface is not fully implemented...
// Reserved for GPIO number, clock source, etc. in MII mode
} mii; /*!< EMAC MII Clock Configuration */
struct {
emac_rmii_clock_mode_t clock_mode; /*!< RMII Clock Mode Configuration */
emac_rmii_clock_gpio_t clock_gpio; /*!< RMII Clock GPIO Configuration */
} rmii; /*!< EMAC RMII Clock Configuration */
} eth_mac_clock_config_t;
2019-04-10 04:24:50 -04:00
/**
* @brief Configuration of Ethernet MAC object
*
*/
typedef struct {
uint32_t sw_reset_timeout_ms; /*!< Software reset timeout value (Unit: ms) */
uint32_t rx_task_stack_size; /*!< Stack size of the receive task */
uint32_t rx_task_prio; /*!< Priority of the receive task */
uint32_t flags; /*!< Flags that specify extra capability for mac driver */
2019-04-10 04:24:50 -04:00
} eth_mac_config_t;
#define ETH_MAC_FLAG_WORK_WITH_CACHE_DISABLE (1 << 0) /*!< MAC driver can work when cache is disabled */
#define ETH_MAC_FLAG_PIN_TO_CORE (1 << 1) /*!< Pin MAC task to the CPU core where driver installation happened */
2019-04-10 04:24:50 -04:00
/**
* @brief Default configuration for Ethernet MAC object
*
*/
#define ETH_MAC_DEFAULT_CONFIG() \
{ \
.sw_reset_timeout_ms = 100, \
2021-07-14 08:03:54 -04:00
.rx_task_stack_size = 2048, \
.rx_task_prio = 15, \
.flags = 0, \
2019-04-10 04:24:50 -04:00
}
#if CONFIG_ETH_USE_ESP32_EMAC
/**
* @brief EMAC specific configuration
*
*/
typedef struct {
int smi_mdc_gpio_num; /*!< SMI MDC GPIO number, set to -1 could bypass the SMI GPIO configuration */
int smi_mdio_gpio_num; /*!< SMI MDIO GPIO number, set to -1 could bypass the SMI GPIO configuration */
eth_data_interface_t interface; /*!< EMAC Data interface to PHY (MII/RMII) */
eth_mac_clock_config_t clock_config; /*!< EMAC Interface clock configuration */
eth_mac_dma_burst_len_t dma_burst_len; /*!< EMAC DMA burst length for both Tx and Rx */
} eth_esp32_emac_config_t;
/**
* @brief Default ESP32's EMAC specific configuration
*
*/
#define ETH_ESP32_EMAC_DEFAULT_CONFIG() \
{ \
.smi_mdc_gpio_num = 23, \
.smi_mdio_gpio_num = 18, \
.interface = EMAC_DATA_INTERFACE_RMII, \
.clock_config = \
{ \
.rmii = \
{ \
.clock_mode = EMAC_CLK_DEFAULT, \
.clock_gpio = EMAC_CLK_IN_GPIO \
} \
}, \
.dma_burst_len = ETH_DMA_BURST_LEN_32 \
}
2019-04-10 04:24:50 -04:00
/**
* @brief Create ESP32 Ethernet MAC instance
*
* @param esp32_config: EMAC specific configuration
* @param config: Ethernet MAC configuration
2019-04-10 04:24:50 -04:00
*
* @return
* - instance: create MAC instance successfully
* - NULL: create MAC instance failed because some error occurred
*/
esp_eth_mac_t *esp_eth_mac_new_esp32(const eth_esp32_emac_config_t *esp32_config, const eth_mac_config_t *config);
2020-01-09 06:32:51 -05:00
#endif // CONFIG_ETH_USE_ESP32_EMAC
2019-04-10 04:24:50 -04:00
#if CONFIG_ETH_SPI_ETHERNET_DM9051
2019-09-18 06:28:55 -04:00
/**
* @brief DM9051 specific configuration
*
*/
typedef struct {
spi_host_device_t spi_host_id; /*!< SPI peripheral */
spi_device_interface_config_t *spi_devcfg; /*!< SPI device configuration */
int int_gpio_num; /*!< Interrupt GPIO number */
2019-09-18 06:28:55 -04:00
} eth_dm9051_config_t;
/**
* @brief Default DM9051 specific configuration
*
*/
#define ETH_DM9051_DEFAULT_CONFIG(spi_host, spi_devcfg_p) \
{ \
.spi_host_id = spi_host, \
.spi_devcfg = spi_devcfg_p, \
.int_gpio_num = 4, \
2019-09-18 06:28:55 -04:00
}
/**
* @brief Create DM9051 Ethernet MAC instance
*
2019-09-18 06:28:55 -04:00
* @param dm9051_config: DM9051 specific configuration
* @param mac_config: Ethernet MAC configuration
*
* @return
* - instance: create MAC instance successfully
* - NULL: create MAC instance failed because some error occurred
*/
2019-09-18 06:28:55 -04:00
esp_eth_mac_t *esp_eth_mac_new_dm9051(const eth_dm9051_config_t *dm9051_config, const eth_mac_config_t *mac_config);
2020-01-09 06:32:51 -05:00
#endif // CONFIG_ETH_SPI_ETHERNET_DM9051
#if CONFIG_ETH_SPI_ETHERNET_W5500
/**
* @brief W5500 specific configuration
*
*/
typedef struct {
spi_host_device_t spi_host_id; /*!< SPI peripheral */
spi_device_interface_config_t *spi_devcfg; /*!< SPI device configuration */
int int_gpio_num; /*!< Interrupt GPIO number */
} eth_w5500_config_t;
/**
* @brief Default W5500 specific configuration
*
*/
#define ETH_W5500_DEFAULT_CONFIG(spi_host, spi_devcfg_p) \
{ \
.spi_host_id = spi_host, \
.spi_devcfg = spi_devcfg_p, \
.int_gpio_num = 4, \
}
/**
* @brief Create W5500 Ethernet MAC instance
*
* @param w5500_config: W5500 specific configuration
* @param mac_config: Ethernet MAC configuration
*
* @return
* - instance: create MAC instance successfully
* - NULL: create MAC instance failed because some error occurred
*/
esp_eth_mac_t *esp_eth_mac_new_w5500(const eth_w5500_config_t *w5500_config, const eth_mac_config_t *mac_config);
#endif // CONFIG_ETH_SPI_ETHERNET_W5500
#if CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL
/**
* @brief KSZ8851SNL specific configuration
*
*/
typedef struct {
spi_host_device_t spi_host_id; /*!< SPI peripheral */
spi_device_interface_config_t *spi_devcfg; /*!< SPI device configuration */
int int_gpio_num; /*!< Interrupt GPIO number */
} eth_ksz8851snl_config_t;
/**
* @brief Default KSZ8851SNL specific configuration
*
*/
#define ETH_KSZ8851SNL_DEFAULT_CONFIG(spi_host, spi_devcfg_p) \
{ \
.spi_host_id = spi_host, \
.spi_devcfg = spi_devcfg_p, \
.int_gpio_num = 14, \
}
/**
* @brief Create KSZ8851SNL Ethernet MAC instance
*
* @param ksz8851snl_config: KSZ8851SNL specific configuration
* @param mac_config: Ethernet MAC configuration
*
* @return
* - instance: create MAC instance successfully
* - NULL: create MAC instance failed because some error occurred
*/
esp_eth_mac_t *esp_eth_mac_new_ksz8851snl(const eth_ksz8851snl_config_t *ksz8851snl_config, const eth_mac_config_t *mac_config);
#endif // CONFIG_ETH_SPI_ETHERNET_KSZ8851
#if CONFIG_ETH_USE_OPENETH
2020-01-09 06:32:51 -05:00
/**
* @brief Create OpenCores Ethernet MAC instance
*
* @param config: Ethernet MAC configuration
*
* @return
* - instance: create MAC instance successfully
* - NULL: create MAC instance failed because some error occurred
*/
esp_eth_mac_t *esp_eth_mac_new_openeth(const eth_mac_config_t *config);
#endif // CONFIG_ETH_USE_OPENETH
2019-04-10 04:24:50 -04:00
#ifdef __cplusplus
}
#endif