esp-idf/components/esp_system/port/soc/esp32c3/system_internal.c

142 lines
4.9 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2018-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
2020-12-01 07:03:10 -05:00
#include <string.h>
#include "sdkconfig.h"
#include "esp_system.h"
#include "esp_private/system_internal.h"
#include "esp_attr.h"
#include "esp_efuse.h"
2020-12-01 07:03:10 -05:00
#include "esp_log.h"
#include "riscv/riscv_interrupts.h"
#include "riscv/interrupt.h"
#include "esp_rom_uart.h"
#include "soc/gpio_reg.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/timer_group_reg.h"
#include "soc/cpu.h"
#include "soc/rtc.h"
2021-03-10 20:48:30 -05:00
#include "soc/rtc_periph.h"
2020-12-01 07:03:10 -05:00
#include "soc/syscon_reg.h"
#include "soc/system_reg.h"
#include "soc/uart_reg.h"
2020-12-01 07:03:10 -05:00
#include "hal/wdt_hal.h"
#include "esp_private/cache_err_int.h"
2021-03-10 20:48:30 -05:00
#include "esp32c3/rom/cache.h"
#include "esp32c3/rom/rtc.h"
2020-12-01 07:03:10 -05:00
/* "inner" restart function for after RTOS, interrupts & anything else on this
* core are already stopped. Stalls other core, resets hardware,
* triggers restart.
*/
void IRAM_ATTR esp_restart_noos(void)
{
// Disable interrupts
riscv_global_interrupts_disable();
// Enable RTC watchdog for 1 second
wdt_hal_context_t rtc_wdt_ctx;
wdt_hal_init(&rtc_wdt_ctx, WDT_RWDT, 0, false);
uint32_t stage_timeout_ticks = (uint32_t)(1000ULL * rtc_clk_slow_freq_get_hz() / 1000ULL);
wdt_hal_write_protect_disable(&rtc_wdt_ctx);
wdt_hal_config_stage(&rtc_wdt_ctx, WDT_STAGE0, stage_timeout_ticks, WDT_STAGE_ACTION_RESET_SYSTEM);
wdt_hal_config_stage(&rtc_wdt_ctx, WDT_STAGE1, stage_timeout_ticks, WDT_STAGE_ACTION_RESET_RTC);
//Enable flash boot mode so that flash booting after restart is protected by the RTC WDT.
wdt_hal_set_flashboot_en(&rtc_wdt_ctx, true);
wdt_hal_write_protect_enable(&rtc_wdt_ctx);
// Reset and stall the other CPU.
// CPU must be reset before stalling, in case it was running a s32c1i
// instruction. This would cause memory pool to be locked by arbiter
// to the stalled CPU, preventing current CPU from accessing this pool.
const uint32_t core_id = cpu_hal_get_core_id();
#if !CONFIG_FREERTOS_UNICORE
const uint32_t other_core_id = (core_id == 0) ? 1 : 0;
esp_cpu_reset(other_core_id);
esp_cpu_stall(other_core_id);
#endif
// Disable TG0/TG1 watchdogs
wdt_hal_context_t wdt0_context = {.inst = WDT_MWDT0, .mwdt_dev = &TIMERG0};
wdt_hal_write_protect_disable(&wdt0_context);
wdt_hal_disable(&wdt0_context);
wdt_hal_write_protect_enable(&wdt0_context);
wdt_hal_context_t wdt1_context = {.inst = WDT_MWDT1, .mwdt_dev = &TIMERG1};
wdt_hal_write_protect_disable(&wdt1_context);
wdt_hal_disable(&wdt1_context);
wdt_hal_write_protect_enable(&wdt1_context);
// Flush any data left in UART FIFOs
esp_rom_uart_tx_wait_idle(0);
esp_rom_uart_tx_wait_idle(1);
// Disable cache
Cache_Disable_ICache();
// 2nd stage bootloader reconfigures SPI flash signals.
// Reset them to the defaults expected by ROM.
WRITE_PERI_REG(GPIO_FUNC0_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC1_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC2_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC3_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC4_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC5_IN_SEL_CFG_REG, 0x30);
// Reset wifi/bluetooth/ethernet/sdio (bb/mac)
SET_PERI_REG_MASK(SYSTEM_CORE_RST_EN_REG,
SYSTEM_BB_RST | SYSTEM_FE_RST | SYSTEM_MAC_RST |
SYSTEM_BT_RST | SYSTEM_BTMAC_RST | SYSTEM_SDIO_RST |
SYSTEM_EMAC_RST | SYSTEM_MACPWR_RST |
SYSTEM_RW_BTMAC_RST | SYSTEM_RW_BTLP_RST | BLE_REG_REST_BIT
|BLE_PWR_REG_REST_BIT | BLE_BB_REG_REST_BIT);
2021-03-10 20:48:30 -05:00
2020-12-01 07:03:10 -05:00
REG_WRITE(SYSTEM_CORE_RST_EN_REG, 0);
// Reset uart0 core first, then reset apb side.
// rom will clear this bit, as well as SYSTEM_UART_RST
SET_PERI_REG_MASK(UART_CLK_CONF_REG(0), UART_RST_CORE_M);
2020-12-01 07:03:10 -05:00
// Reset timer/spi/uart
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN0_REG,
SYSTEM_TIMERS_RST | SYSTEM_SPI01_RST | SYSTEM_UART_RST | SYSTEM_SYSTIMER_RST);
2020-12-01 07:03:10 -05:00
REG_WRITE(SYSTEM_PERIP_RST_EN0_REG, 0);
2020-12-22 23:29:57 -05:00
// Reset dma
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN1_REG, SYSTEM_DMA_RST);
2020-12-01 07:03:10 -05:00
REG_WRITE(SYSTEM_PERIP_RST_EN1_REG, 0);
2020-12-22 23:29:57 -05:00
2020-12-01 07:03:10 -05:00
// Set CPU back to XTAL source, no PLL, same as hard reset
#if !CONFIG_IDF_ENV_FPGA
rtc_clk_cpu_freq_set_xtal();
#endif
#if !CONFIG_FREERTOS_UNICORE
// Clear entry point for APP CPU
REG_WRITE(SYSTEM_CORE_1_CONTROL_1_REG, 0);
#endif
// Reset CPUs
if (core_id == 0) {
// Running on PRO CPU: APP CPU is stalled. Can reset both CPUs.
#if !CONFIG_FREERTOS_UNICORE
esp_cpu_reset(1);
#endif
esp_cpu_reset(0);
}
#if !CONFIG_FREERTOS_UNICORE
else {
// Running on APP CPU: need to reset PRO CPU and unstall it,
// then reset APP CPU
esp_cpu_reset(0);
esp_cpu_unstall(0);
esp_cpu_reset(1);
}
#endif
while (true) {
;
}
}