esp-idf/components/bootloader/subproject/main/ld/esp32s3/bootloader.ld

/*
 * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */
/** Simplified memory map for the bootloader.
 *  Make sure the bootloader can load into main memory without overwriting itself.
 *
 *  ESP32-S3 ROM static data usage is as follows:
 *  - 0x3fcd7e00 - 0x3fce9704: Shared buffers, used in UART/USB/SPI download mode only
 *  - 0x3fce9710 - 0x3fceb710: PRO CPU stack, can be reclaimed as heap after RTOS startup
 *  - 0x3fceb710 - 0x3fced710: APP CPU stack, can be reclaimed as heap after RTOS startup
 *  - 0x3fced710 - 0x3fcf0000: ROM .bss and .data (not easily reclaimable)
 *
 *  The 2nd stage bootloader can take space up to the end of ROM shared
 *  buffers area (0x3fce9704). For alignment purpose we shall use value (0x3fce9700).
 */

/* The offset between Dbus and Ibus. Used to convert between 0x403xxxxx and 0x3fcxxxxx addresses. */
iram_dram_offset = 0x6f0000;

/* We consider 0x3fce9700 to be the last usable address for 2nd stage bootloader stack overhead, dram_seg,
 * and work out iram_seg and iram_loader_seg addresses from there, backwards.
 */

/* These lengths can be adjusted, if necessary: */
bootloader_usable_dram_end = 0x3fce9700;
bootloader_stack_overhead = 0x2000; /* For safety margin between bootloader data section and startup stacks */
bootloader_dram_seg_len = 0x4000;
bootloader_iram_loader_seg_len = 0x7000;
bootloader_iram_seg_len = 0x3000;

/* Start of the lower region is determined by region size and the end of the higher region */
bootloader_dram_seg_end = bootloader_usable_dram_end - bootloader_stack_overhead;
bootloader_dram_seg_start = bootloader_dram_seg_end - bootloader_dram_seg_len;
bootloader_iram_loader_seg_start = bootloader_dram_seg_start - bootloader_iram_loader_seg_len + iram_dram_offset;
bootloader_iram_seg_start = bootloader_iram_loader_seg_start - bootloader_iram_seg_len;

MEMORY
{
  iram_seg (RWX) :                  org = bootloader_iram_seg_start, len = bootloader_iram_seg_len
  iram_loader_seg (RWX) :           org = bootloader_iram_loader_seg_start, len = bootloader_iram_loader_seg_len
  dram_seg (RW) :                   org = bootloader_dram_seg_start, len = bootloader_dram_seg_len
}

/* The app may use RAM for static allocations up to the start of iram_loader_seg.
 * If you have changed something above and this assert fails:
 * 1. Check what the new value of bootloader_iram_loader_seg start is.
 * 2. Update the value in this assert.
 * 3. Update SRAM_IRAM_END in components/esp_system/ld/esp32s3/memory.ld.in to the same value.
 */
ASSERT(bootloader_iram_loader_seg_start == 0x403cc700, "bootloader_iram_loader_seg_start inconsistent with SRAM_IRAM_END");

/* Default entry point: */
ENTRY(call_start_cpu0);

SECTIONS
{

  .iram_loader.text :
  {
    . = ALIGN (16);
    _loader_text_start = ABSOLUTE(.);
    *(.stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
     *(.iram1 .iram1.*) /* catch stray IRAM_ATTR */
    *liblog.a:(.literal .text .literal.* .text.*)
    *libgcc.a:(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_clock_loader.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_common_loader.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_flash.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_random.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_random*.*(.literal.bootloader_random_disable .text.bootloader_random_disable)
    *libesp_common.a:fpga_overrides.*(.literal.bootloader_fill_random .text.bootloader_fill_random)
    *libbootloader_support.a:bootloader_efuse.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_utility.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_sha.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_console_loader.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_panic.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:bootloader_soc.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:esp_image_format.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:flash_encrypt.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:flash_encryption_secure_features.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:flash_partitions.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:secure_boot.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:secure_boot_secure_features.*(.literal .text .literal.* .text.*)
    *libbootloader_support.a:secure_boot_signatures_bootloader.*(.literal .text .literal.* .text.*)
    *libmicro-ecc.a:*.*(.literal .text .literal.* .text.*)
    *libspi_flash.a:*.*(.literal .text .literal.* .text.*)
    *libhal.a:wdt_hal_iram.*(.literal .text .literal.* .text.*)
    *libhal.a:mmu_hal.*(.literal .text .literal.* .text.*)
    *libhal.a:cache_hal.*(.literal .text .literal.* .text.*)
    *libhal.a:efuse_hal.*(.literal .text .literal.* .text.*)
    *libesp_hw_support.a:rtc_clk.*(.literal .text .literal.* .text.*)
    *libesp_hw_support.a:rtc_time.*(.literal .text .literal.* .text.*)
    *libesp_hw_support.a:regi2c_ctrl.*(.literal .text .literal.* .text.*)
    *libefuse.a:*.*(.literal .text .literal.* .text.*)
    *(.fini.literal)
    *(.fini)
    *(.gnu.version)
    _loader_text_end = ABSOLUTE(.);
  } > iram_loader_seg

  .iram.text :
  {
    . = ALIGN (16);
    *(.entry.text)
    *(.init.literal)
    *(.init)
  } > iram_seg


  /* Shared RAM */
  .dram0.bss (NOLOAD) :
  {
    . = ALIGN (8);
    _dram_start = ABSOLUTE(.);
    _bss_start = ABSOLUTE(.);
    *(.dynsbss)
    *(.sbss)
    *(.sbss.*)
    *(.gnu.linkonce.sb.*)
    *(.scommon)
    *(.sbss2)
    *(.sbss2.*)
    *(.gnu.linkonce.sb2.*)
    *(.dynbss)
    *(.bss)
    *(.bss.*)
    *(.gnu.linkonce.b.*)
    *(COMMON)
    . = ALIGN (8);
    _bss_end = ABSOLUTE(.);
  } > dram_seg

  .dram0.data :
  {
    _data_start = ABSOLUTE(.);
    *(.data)
    *(.data.*)
    *(.gnu.linkonce.d.*)
    *(.data1)
    *(.sdata)
    *(.sdata.*)
    *(.gnu.linkonce.s.*)
    *(.gnu.linkonce.s2.*)
    *(.jcr)
    _data_end = ABSOLUTE(.);
  } > dram_seg

  .dram0.rodata :
  {
    _rodata_start = ABSOLUTE(.);
    *(.rodata)
    *(.rodata.*)
    *(.gnu.linkonce.r.*)
    *(.rodata1)
    *(.sdata2 .sdata2.*)
    __XT_EXCEPTION_TABLE_ = ABSOLUTE(.);
    *(.xt_except_table)
    *(.gcc_except_table)
    *(.gnu.linkonce.e.*)
    *(.gnu.version_r)
    *(.eh_frame)
    . = (. + 3) & ~ 3;
    /* C++ constructor and destructor tables, properly ordered: */
    __init_array_start = ABSOLUTE(.);
    KEEP (*crtbegin.*(.ctors))
    KEEP (*(EXCLUDE_FILE (*crtend.*) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors))
    __init_array_end = ABSOLUTE(.);
    KEEP (*crtbegin.*(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend.*) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors))
    /*  C++ exception handlers table:  */
    __XT_EXCEPTION_DESCS_ = ABSOLUTE(.);
    *(.xt_except_desc)
    *(.gnu.linkonce.h.*)
    __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
    *(.xt_except_desc_end)
    *(.dynamic)
    *(.gnu.version_d)
    _rodata_end = ABSOLUTE(.);
	  /* Literals are also RO data. */
    _lit4_start = ABSOLUTE(.);
    *(*.lit4)
    *(.lit4.*)
    *(.gnu.linkonce.lit4.*)
    _lit4_end = ABSOLUTE(.);
    . = ALIGN(4);
    _dram_end = ABSOLUTE(.);
  } > dram_seg

  .iram.text :
  {
    _stext = .;
    _text_start = ABSOLUTE(.);
    *(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
    *(.iram .iram.*) /* catch stray IRAM_ATTR */
    *(.fini.literal)
    *(.fini)
    *(.gnu.version)

    /** CPU will try to prefetch up to 16 bytes of
      * of instructions. This means that any configuration (e.g. MMU, PMS) must allow
      * safe access to up to 16 bytes after the last real instruction, add
      * dummy bytes to ensure this
      */
    . += 16;

    _text_end = ABSOLUTE(.);
    _etext = .;
  } > iram_seg

  /** This section will be used by the debugger and disassembler to get more information
   * about raw data present in the code.
   * Indeed, it may be required to add some padding at some points in the code
   * in order to align a branch/jump destination on a particular bound.
   * Padding these instructions will generate null bytes that shall be
   * interpreted as data, and not code by the debugger or disassembler.
   * This section will only be present in the ELF file, not in the final binary
   * For more details, check GCC-212
   */
  .xt.prop 0 :
  {
    KEEP (*(.xt.prop .gnu.linkonce.prop.*))
  }

  .xt.lit 0 :
  {
    KEEP (*(.xt.lit .gnu.linkonce.p.*))
  }

}