mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
151 lines
6.6 KiB
Markdown
151 lines
6.6 KiB
Markdown
# BLE peripheral example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example creates GATT server and then starts advertising, waiting to be connected to a GATT client.
|
|
|
|
It uses ESP32's Bluetooth controller and NimBLE stack based BLE host.
|
|
|
|
This example aims at understanding GATT database configuration, advertisement and SMP related NimBLE APIs.
|
|
|
|
It also demonstrates security features of NimBLE stack. SMP parameters like I/O capabilities of device, Bonding flag, MITM protection flag and Secure Connection only mode etc., can be configured through menuconfig options.
|
|
|
|
To test this demo, any BLE scanner app can be used.
|
|
|
|
A Python based utility `bleprph_test.py` is also provided (which will run as a BLE GATT Client) and can be used to test this example.
|
|
|
|
Note :
|
|
|
|
* Make sure to run `python -m pip install --user -r $IDF_PATH/requirements.txt -r $IDF_PATH/tools/ble/requirements.txt` to install the dependency packages needed.
|
|
* Currently this Python utility is only supported on Linux (BLE communication is via BLuez + DBus).
|
|
|
|
## How to use example
|
|
|
|
### Configure the project
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
|
|
* Set serial port under Serial Flasher Options.
|
|
|
|
* Select I/O capabilities of device from 'Example Configuration > I/O Capability', default is 'Just_works'.
|
|
|
|
* Enable/Disable other security related parameters 'Bonding, MITM option, secure connection(SM SC)' from 'Example Configuration'.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
There is this console output when bleprph is connected and characteristic is read:
|
|
|
|
```
|
|
|
|
I (118) BTDM_INIT: BT controller compile version [fe7ced0]
|
|
I (118) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
|
W (128) phy_init: failed to load RF calibration data (0xffffffff), falling back to full calibration
|
|
I (268) phy: phy_version: 4100, 6fa5e27, Jan 25 2019, 17:02:06, 0, 2
|
|
I (508) NimBLE_BLE_PRPH: BLE Host Task Started
|
|
I (508) uart: queue free spaces: 8
|
|
GAP procedure initiated: stop advertising.
|
|
Device Address: xx:xx:xx:xx:xx:xx
|
|
GAP procedure initiated: advertise; disc_mode=2 adv_channel_map=0 own_addr_type=0 adv_filter_policy=0 adv_itvl_min=0 adv_itvl_max=0
|
|
connection established; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=39 conn_latency=0 supervision_timeout=500 encrypted=0 authenticated=0 bonded=0
|
|
|
|
connection updated; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=6 conn_latency=0 supervision_timeout=500 encrypted=0 authenticated=0 bonded=0
|
|
|
|
I (50888) NimBLE_BLE_PRPH: PASSKEY_ACTION_EVENT started
|
|
|
|
I (50888) NimBLE_BLE_PRPH: Passkey on device's display: xxxxxx
|
|
I (50888) NimBLE_BLE_PRPH: Accept or reject the passkey through console in this format -> key Y or key N
|
|
key Y
|
|
I (50898) NimBLE_BLE_PRPH: ble_sm_inject_io result: 0
|
|
|
|
encryption change event; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1
|
|
peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=6 conn_latency=0 supervision_timeout=500 encrypted=1 authenticated=1 bonded=1
|
|
|
|
connection updated; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx
|
|
peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=39 conn_latency=0 supervision_timeout=500 encrypted=1 authenticated=1 bonded=1
|
|
|
|
```
|
|
|
|
## Running Python Utility
|
|
|
|
```
|
|
python bleprph_test.py
|
|
```
|
|
|
|
## Python Utility Output
|
|
|
|
This is this output seen on the python side on successful connection:
|
|
|
|
```
|
|
discovering adapter...
|
|
bluetooth adapter discovered
|
|
powering on adapter...
|
|
bluetooth adapter powered on
|
|
|
|
Started Discovery
|
|
|
|
Connecting to device...
|
|
|
|
Connected to device
|
|
|
|
Services
|
|
|
|
[dbus.String(u'00001801-0000-1000-8000-00805f9b34fb', variant_level=1), dbus.String(u'59462f12-9543-9999-12c8-58b459a2712d', variant_level=1)]
|
|
|
|
Characteristics retrieved
|
|
|
|
Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service000a/char000b
|
|
Characteristic UUID: 5c3a659e-897e-45e1-b016-007107c96df6
|
|
Value: dbus.Array([dbus.Byte(45), dbus.Byte(244), dbus.Byte(81), dbus.Byte(88)], signature=dbus.Signature('y'))
|
|
Properties: : dbus.Array([dbus.String(u'read')], signature=dbus.Signature('s'), variant_level=1)
|
|
|
|
Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service000a/char000d
|
|
Characteristic UUID: 5c3a659e-897e-45e1-b016-007107c96df7
|
|
Value: dbus.Array([dbus.Byte(0)], signature=dbus.Signature('y'))
|
|
Properties: : dbus.Array([dbus.String(u'read'), dbus.String(u'write')], signature=dbus.Signature('s'), variant_level=1)
|
|
|
|
Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service0006/char0007
|
|
Characteristic UUID: 00002a05-0000-1000-8000-00805f9b34fb
|
|
Value: None
|
|
Properties: : dbus.Array([dbus.String(u'indicate')], signature=dbus.Signature('s'), variant_level=1)
|
|
|
|
Characteristics after write operation
|
|
|
|
Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service000a/char000b
|
|
Characteristic UUID: 5c3a659e-897e-45e1-b016-007107c96df6
|
|
Value: dbus.Array([dbus.Byte(45), dbus.Byte(244), dbus.Byte(81), dbus.Byte(88)], signature=dbus.Signature('y'))
|
|
Properties: : dbus.Array([dbus.String(u'read')], signature=dbus.Signature('s'), variant_level=1)
|
|
|
|
Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service000a/char000d
|
|
Characteristic UUID: 5c3a659e-897e-45e1-b016-007107c96df7
|
|
Value: dbus.Array([dbus.Byte(65)], signature=dbus.Signature('y'))
|
|
Properties: : dbus.Array([dbus.String(u'read'), dbus.String(u'write')], signature=dbus.Signature('s'), variant_level=1)
|
|
|
|
Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service0006/char0007
|
|
Characteristic UUID: 00002a05-0000-1000-8000-00805f9b34fb
|
|
Value: None
|
|
Properties: : dbus.Array([dbus.String(u'indicate')], signature=dbus.Signature('s'), variant_level=1)
|
|
|
|
exiting from test...
|
|
disconnecting device...
|
|
device disconnected
|
|
powering off adapter...
|
|
bluetooth adapter powered off
|
|
```
|
|
|
|
## Note
|
|
* NVS support is not yet integrated to bonding. So, for now, bonding is not persistent across reboot.
|