mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
126 lines
15 KiB
Plaintext
126 lines
15 KiB
Plaintext
|
|
# field_name, | efuse_block, | bit_start, | bit_count, |comment #
|
|
# | (EFUSE_BLK0 | (0..255) | (1-256) | #
|
|
# | EFUSE_BLK1 | | | #
|
|
# | ...) | | | #
|
|
##########################################################################
|
|
# !!!!!!!!!!! #
|
|
# After editing this file, run the command manually "idf.py efuse-common-table"
|
|
# this will generate new source files, next rebuild all the sources.
|
|
# !!!!!!!!!!! #
|
|
|
|
# This file was generated by regtools.py based on the efuses.yaml file with the version: 552d7a824581925566213ca4f4d488dc
|
|
|
|
WR_DIS, EFUSE_BLK0, 0, 32, [] Disable programming of individual eFuses
|
|
WR_DIS.RD_DIS, EFUSE_BLK0, 0, 1, [] wr_dis of RD_DIS
|
|
WR_DIS.SPI_BOOT_CRYPT_CNT, EFUSE_BLK0, 4, 1, [] wr_dis of SPI_BOOT_CRYPT_CNT
|
|
WR_DIS.SECURE_BOOT_KEY_REVOKE0, EFUSE_BLK0, 5, 1, [] wr_dis of SECURE_BOOT_KEY_REVOKE0
|
|
WR_DIS.SECURE_BOOT_KEY_REVOKE1, EFUSE_BLK0, 6, 1, [] wr_dis of SECURE_BOOT_KEY_REVOKE1
|
|
WR_DIS.SECURE_BOOT_KEY_REVOKE2, EFUSE_BLK0, 7, 1, [] wr_dis of SECURE_BOOT_KEY_REVOKE2
|
|
WR_DIS.KEY_PURPOSE_0, EFUSE_BLK0, 8, 1, [WR_DIS.KEY0_PURPOSE] wr_dis of KEY_PURPOSE_0
|
|
WR_DIS.KEY_PURPOSE_1, EFUSE_BLK0, 9, 1, [WR_DIS.KEY1_PURPOSE] wr_dis of KEY_PURPOSE_1
|
|
WR_DIS.KEY_PURPOSE_2, EFUSE_BLK0, 10, 1, [WR_DIS.KEY2_PURPOSE] wr_dis of KEY_PURPOSE_2
|
|
WR_DIS.KEY_PURPOSE_3, EFUSE_BLK0, 11, 1, [WR_DIS.KEY3_PURPOSE] wr_dis of KEY_PURPOSE_3
|
|
WR_DIS.KEY_PURPOSE_4, EFUSE_BLK0, 12, 1, [WR_DIS.KEY4_PURPOSE] wr_dis of KEY_PURPOSE_4
|
|
WR_DIS.KEY_PURPOSE_5, EFUSE_BLK0, 13, 1, [WR_DIS.KEY5_PURPOSE] wr_dis of KEY_PURPOSE_5
|
|
WR_DIS.SECURE_BOOT_EN, EFUSE_BLK0, 15, 1, [] wr_dis of SECURE_BOOT_EN
|
|
WR_DIS.BLK1, EFUSE_BLK0, 20, 1, [] wr_dis of BLOCK1
|
|
WR_DIS.MAC, EFUSE_BLK0, 20, 1, [WR_DIS.MAC_FACTORY] wr_dis of MAC
|
|
WR_DIS.MAC_EXT, EFUSE_BLK0, 20, 1, [] wr_dis of MAC_EXT
|
|
WR_DIS.BLOCK_SYS_DATA1, EFUSE_BLK0, 21, 1, [WR_DIS.SYS_DATA_PART1] wr_dis of BLOCK_SYS_DATA1
|
|
WR_DIS.BLOCK_USR_DATA, EFUSE_BLK0, 22, 1, [WR_DIS.USER_DATA] wr_dis of BLOCK_USR_DATA
|
|
WR_DIS.BLOCK_KEY0, EFUSE_BLK0, 23, 1, [WR_DIS.KEY0] wr_dis of BLOCK_KEY0
|
|
WR_DIS.BLOCK_KEY1, EFUSE_BLK0, 24, 1, [WR_DIS.KEY1] wr_dis of BLOCK_KEY1
|
|
WR_DIS.BLOCK_KEY2, EFUSE_BLK0, 25, 1, [WR_DIS.KEY2] wr_dis of BLOCK_KEY2
|
|
WR_DIS.BLOCK_KEY3, EFUSE_BLK0, 26, 1, [WR_DIS.KEY3] wr_dis of BLOCK_KEY3
|
|
WR_DIS.BLOCK_KEY4, EFUSE_BLK0, 27, 1, [WR_DIS.KEY4] wr_dis of BLOCK_KEY4
|
|
WR_DIS.BLOCK_KEY5, EFUSE_BLK0, 28, 1, [WR_DIS.KEY5] wr_dis of BLOCK_KEY5
|
|
WR_DIS.BLOCK_SYS_DATA2, EFUSE_BLK0, 29, 1, [WR_DIS.SYS_DATA_PART2] wr_dis of BLOCK_SYS_DATA2
|
|
RD_DIS, EFUSE_BLK0, 32, 7, [] Disable reading from BlOCK4-10
|
|
RD_DIS.BLOCK_KEY0, EFUSE_BLK0, 32, 1, [RD_DIS.KEY0] rd_dis of BLOCK_KEY0
|
|
RD_DIS.BLOCK_KEY1, EFUSE_BLK0, 33, 1, [RD_DIS.KEY1] rd_dis of BLOCK_KEY1
|
|
RD_DIS.BLOCK_KEY2, EFUSE_BLK0, 34, 1, [RD_DIS.KEY2] rd_dis of BLOCK_KEY2
|
|
RD_DIS.BLOCK_KEY3, EFUSE_BLK0, 35, 1, [RD_DIS.KEY3] rd_dis of BLOCK_KEY3
|
|
RD_DIS.BLOCK_KEY4, EFUSE_BLK0, 36, 1, [RD_DIS.KEY4] rd_dis of BLOCK_KEY4
|
|
RD_DIS.BLOCK_KEY5, EFUSE_BLK0, 37, 1, [RD_DIS.KEY5] rd_dis of BLOCK_KEY5
|
|
RD_DIS.BLOCK_SYS_DATA2, EFUSE_BLK0, 38, 1, [RD_DIS.SYS_DATA_PART2] rd_dis of BLOCK_SYS_DATA2
|
|
USB_DEVICE_EXCHG_PINS, EFUSE_BLK0, 39, 1, [] Enable usb device exchange pins of D+ and D-
|
|
USB_OTG11_EXCHG_PINS, EFUSE_BLK0, 40, 1, [] Enable usb otg11 exchange pins of D+ and D-
|
|
DIS_USB_JTAG, EFUSE_BLK0, 41, 1, [] Represents whether the function of usb switch to jtag is disabled or enabled. 1: disabled. 0: enabled
|
|
POWERGLITCH_EN, EFUSE_BLK0, 42, 1, [] Represents whether power glitch function is enabled. 1: enabled. 0: disabled
|
|
DIS_FORCE_DOWNLOAD, EFUSE_BLK0, 44, 1, [] Represents whether the function that forces chip into download mode is disabled or enabled. 1: disabled. 0: enabled
|
|
SPI_DOWNLOAD_MSPI_DIS, EFUSE_BLK0, 45, 1, [] Set this bit to disable accessing MSPI flash/MSPI ram by SYS AXI matrix during boot_mode_download
|
|
DIS_TWAI, EFUSE_BLK0, 46, 1, [] Represents whether TWAI function is disabled or enabled. 1: disabled. 0: enabled
|
|
JTAG_SEL_ENABLE, EFUSE_BLK0, 47, 1, [] Represents whether the selection between usb_to_jtag and pad_to_jtag through strapping gpio15 when both EFUSE_DIS_PAD_JTAG and EFUSE_DIS_USB_JTAG are equal to 0 is enabled or disabled. 1: enabled. 0: disabled
|
|
SOFT_DIS_JTAG, EFUSE_BLK0, 48, 3, [] Represents whether JTAG is disabled in soft way. Odd number: disabled. Even number: enabled
|
|
DIS_PAD_JTAG, EFUSE_BLK0, 51, 1, [] Represents whether JTAG is disabled in the hard way(permanently). 1: disabled. 0: enabled
|
|
DIS_DOWNLOAD_MANUAL_ENCRYPT, EFUSE_BLK0, 52, 1, [] Represents whether flash encrypt function is disabled or enabled(except in SPI boot mode). 1: disabled. 0: enabled
|
|
USB_PHY_SEL, EFUSE_BLK0, 57, 1, [] TBD
|
|
KM_HUK_GEN_STATE_LOW, EFUSE_BLK0, 58, 6, [] Set this bit to control validation of HUK generate mode. Odd of 1 is invalid; even of 1 is valid
|
|
KM_HUK_GEN_STATE_HIGH, EFUSE_BLK0, 64, 3, [] Set this bit to control validation of HUK generate mode. Odd of 1 is invalid; even of 1 is valid
|
|
KM_RND_SWITCH_CYCLE, EFUSE_BLK0, 67, 2, [] Set bits to control key manager random number switch cycle. 0: control by register. 1: 8 km clk cycles. 2: 16 km cycles. 3: 32 km cycles
|
|
KM_DEPLOY_ONLY_ONCE, EFUSE_BLK0, 69, 4, [] Set each bit to control whether corresponding key can only be deployed once. 1 is true; 0 is false. Bit0: ecdsa. Bit1: xts. Bit2: hmac. Bit3: ds
|
|
FORCE_USE_KEY_MANAGER_KEY, EFUSE_BLK0, 73, 4, [] Set each bit to control whether corresponding key must come from key manager.. 1 is true; 0 is false. Bit0: ecdsa. Bit1: xts. Bit2: hmac. Bit3: ds
|
|
FORCE_DISABLE_SW_INIT_KEY, EFUSE_BLK0, 77, 1, [] Set this bit to disable software written init key; and force use efuse_init_key
|
|
XTS_KEY_LENGTH_256, EFUSE_BLK0, 78, 1, [] Set this bit to configure flash encryption use xts-128 key; else use xts-256 key
|
|
WDT_DELAY_SEL, EFUSE_BLK0, 80, 2, [] Represents whether RTC watchdog timeout threshold is selected at startup. 1: selected. 0: not selected
|
|
SPI_BOOT_CRYPT_CNT, EFUSE_BLK0, 82, 3, [] Enables flash encryption when 1 or 3 bits are set and disables otherwise {0: "Disable"; 1: "Enable"; 3: "Disable"; 7: "Enable"}
|
|
SECURE_BOOT_KEY_REVOKE0, EFUSE_BLK0, 85, 1, [] Revoke 1st secure boot key
|
|
SECURE_BOOT_KEY_REVOKE1, EFUSE_BLK0, 86, 1, [] Revoke 2nd secure boot key
|
|
SECURE_BOOT_KEY_REVOKE2, EFUSE_BLK0, 87, 1, [] Revoke 3rd secure boot key
|
|
KEY_PURPOSE_0, EFUSE_BLK0, 88, 4, [KEY0_PURPOSE] Represents the purpose of Key0
|
|
KEY_PURPOSE_1, EFUSE_BLK0, 92, 4, [KEY1_PURPOSE] Represents the purpose of Key1
|
|
KEY_PURPOSE_2, EFUSE_BLK0, 96, 4, [KEY2_PURPOSE] Represents the purpose of Key2
|
|
KEY_PURPOSE_3, EFUSE_BLK0, 100, 4, [KEY3_PURPOSE] Represents the purpose of Key3
|
|
KEY_PURPOSE_4, EFUSE_BLK0, 104, 4, [KEY4_PURPOSE] Represents the purpose of Key4
|
|
KEY_PURPOSE_5, EFUSE_BLK0, 108, 4, [KEY5_PURPOSE] Represents the purpose of Key5
|
|
SEC_DPA_LEVEL, EFUSE_BLK0, 112, 2, [] Represents the spa secure level by configuring the clock random divide mode
|
|
ECDSA_ENABLE_SOFT_K, EFUSE_BLK0, 114, 1, [] Represents whether hardware random number k is forced used in ESDCA. 1: force used. 0: not force used
|
|
CRYPT_DPA_ENABLE, EFUSE_BLK0, 115, 1, [] Represents whether anti-dpa attack is enabled. 1:enabled. 0: disabled
|
|
SECURE_BOOT_EN, EFUSE_BLK0, 116, 1, [] Represents whether secure boot is enabled or disabled. 1: enabled. 0: disabled
|
|
SECURE_BOOT_AGGRESSIVE_REVOKE, EFUSE_BLK0, 117, 1, [] Represents whether revoking aggressive secure boot is enabled or disabled. 1: enabled. 0: disabled
|
|
FLASH_TYPE, EFUSE_BLK0, 119, 1, [] The type of interfaced flash. 0: four data lines; 1: eight data lines
|
|
FLASH_PAGE_SIZE, EFUSE_BLK0, 120, 2, [] Set flash page size
|
|
FLASH_ECC_EN, EFUSE_BLK0, 122, 1, [] Set this bit to enable ecc for flash boot
|
|
DIS_USB_OTG_DOWNLOAD_MODE, EFUSE_BLK0, 123, 1, [] Set this bit to disable download via USB-OTG
|
|
FLASH_TPUW, EFUSE_BLK0, 124, 4, [] Represents the flash waiting time after power-up; in unit of ms. When the value less than 15; the waiting time is the programmed value. Otherwise; the waiting time is 2 times the programmed value
|
|
DIS_DOWNLOAD_MODE, EFUSE_BLK0, 128, 1, [] Represents whether Download mode is disabled or enabled. 1: disabled. 0: enabled
|
|
DIS_DIRECT_BOOT, EFUSE_BLK0, 129, 1, [] Represents whether direct boot mode is disabled or enabled. 1: disabled. 0: enabled
|
|
DIS_USB_SERIAL_JTAG_ROM_PRINT, EFUSE_BLK0, 130, 1, [] Represents whether print from USB-Serial-JTAG is disabled or enabled. 1: disabled. 0: enabled
|
|
LOCK_KM_KEY, EFUSE_BLK0, 131, 1, [] TBD
|
|
DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE, EFUSE_BLK0, 132, 1, [] Represents whether the USB-Serial-JTAG download function is disabled or enabled. 1: disabled. 0: enabled
|
|
ENABLE_SECURITY_DOWNLOAD, EFUSE_BLK0, 133, 1, [] Represents whether security download is enabled or disabled. 1: enabled. 0: disabled
|
|
UART_PRINT_CONTROL, EFUSE_BLK0, 134, 2, [] Represents the type of UART printing. 00: force enable printing. 01: enable printing when GPIO8 is reset at low level. 10: enable printing when GPIO8 is reset at high level. 11: force disable printing
|
|
FORCE_SEND_RESUME, EFUSE_BLK0, 136, 1, [] Represents whether ROM code is forced to send a resume command during SPI boot. 1: forced. 0:not forced
|
|
SECURE_VERSION, EFUSE_BLK0, 137, 16, [] Represents the version used by ESP-IDF anti-rollback feature
|
|
SECURE_BOOT_DISABLE_FAST_WAKE, EFUSE_BLK0, 153, 1, [] Represents whether FAST VERIFY ON WAKE is disabled or enabled when Secure Boot is enabled. 1: disabled. 0: enabled
|
|
HYS_EN_PAD, EFUSE_BLK0, 154, 1, [] Represents whether the hysteresis function of corresponding PAD is enabled. 1: enabled. 0:disabled
|
|
DCDC_VSET, EFUSE_BLK0, 155, 5, [] Set the dcdc voltage default
|
|
PXA0_TIEH_SEL_0, EFUSE_BLK0, 160, 2, [] TBD
|
|
PXA0_TIEH_SEL_1, EFUSE_BLK0, 162, 2, [] TBD
|
|
PXA0_TIEH_SEL_2, EFUSE_BLK0, 164, 2, [] TBD
|
|
PXA0_TIEH_SEL_3, EFUSE_BLK0, 166, 2, [] TBD
|
|
KM_DISABLE_DEPLOY_MODE, EFUSE_BLK0, 168, 4, [] TBD
|
|
HP_PWR_SRC_SEL, EFUSE_BLK0, 178, 1, [] HP system power source select. 0:LDO. 1: DCDC
|
|
DCDC_VSET_EN, EFUSE_BLK0, 179, 1, [] Select dcdc vset use efuse_dcdc_vset
|
|
DIS_WDT, EFUSE_BLK0, 180, 1, [] Set this bit to disable watch dog
|
|
DIS_SWD, EFUSE_BLK0, 181, 1, [] Set this bit to disable super-watchdog
|
|
MAC, EFUSE_BLK1, 40, 8, [MAC_FACTORY] MAC address
|
|
, EFUSE_BLK1, 32, 8, [MAC_FACTORY] MAC address
|
|
, EFUSE_BLK1, 24, 8, [MAC_FACTORY] MAC address
|
|
, EFUSE_BLK1, 16, 8, [MAC_FACTORY] MAC address
|
|
, EFUSE_BLK1, 8, 8, [MAC_FACTORY] MAC address
|
|
, EFUSE_BLK1, 0, 8, [MAC_FACTORY] MAC address
|
|
MAC_EXT, EFUSE_BLK1, 48, 8, [] Stores the extended bits of MAC address [0]
|
|
, EFUSE_BLK1, 56, 8, [] Stores the extended bits of MAC address [1]
|
|
BLOCK_SYS_DATA1, EFUSE_BLK2, 0, 256, [SYS_DATA_PART1] System data part 1
|
|
USER_DATA, EFUSE_BLK3, 0, 256, [BLOCK_USR_DATA] User data
|
|
USER_DATA.MAC_CUSTOM, EFUSE_BLK3, 200, 48, [MAC_CUSTOM CUSTOM_MAC] Custom MAC (TODO, not defined yet)
|
|
KEY0, EFUSE_BLK4, 0, 256, [BLOCK_KEY0] Key0 or user data
|
|
KEY1, EFUSE_BLK5, 0, 256, [BLOCK_KEY1] Key1 or user data
|
|
KEY2, EFUSE_BLK6, 0, 256, [BLOCK_KEY2] Key2 or user data
|
|
KEY3, EFUSE_BLK7, 0, 256, [BLOCK_KEY3] Key3 or user data
|
|
KEY4, EFUSE_BLK8, 0, 256, [BLOCK_KEY4] Key4 or user data
|
|
KEY5, EFUSE_BLK9, 0, 256, [BLOCK_KEY5] Key5 or user data
|
|
SYS_DATA_PART2, EFUSE_BLK10, 0, 256, [BLOCK_SYS_DATA2] System data part 2 (reserved)
|