esp-idf/examples/mesh/manual_networking/README.md
qiyueixa 68ff628927 mesh: update libs
1. add APIs to set/get announce interval values.
2. add API to enable/disable the min rate to 6Mbps for data packages.
3. add APIs to set/get RSSI threshold values.
4. fix ap_loss.
2018-06-25 21:47:53 +08:00

902 B

Mesh Manual Networking Example

ESP-MESH provides the function of self-organized networking, but if users disable this function on one node, users must designate a parent for this node.

This example demonstrates how to scan a list of parent candidates, choose an appropriate parent and set as the parent of this node.

If no parent is found through this scan, enable the self-organized function to let the ESP-MESH handle it by itself.

Run make menuconfig to configure the mesh network channel, router SSID, router password and mesh softAP settings.

When the mesh network is established and if you happen to run this example on ESP-WROVER-KIT boards, the RGB light indicator will show you on which layer devices are. The pink reprents root; the yellow reprents layer 2; the red reprents layer 3; the blue reprents layer 4; the green reprents layer 5; the white reprents layer greater than 5.