mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
77 lines
3.1 KiB
Markdown
77 lines
3.1 KiB
Markdown
# WPA2 Enterprise Example
|
|
|
|
This example shows how ESP32 connects to AP with wpa2 enterprise encryption. Example does the following steps:
|
|
|
|
1. Install CA certificate which is optional.
|
|
2. Install client certificate and client key which is required in TLS method and optional in PEAP and TTLS methods.
|
|
3. Set identity of phase 1 which is optional.
|
|
4. Set user name and password of phase 2 which is required in PEAP and TTLS methods.
|
|
5. Enable wpa2 enterprise.
|
|
6. Connect to AP.
|
|
|
|
*Note:* certificate currently is generated when compiling the example and then stored in flash.
|
|
|
|
## The file wpa2_ca.pem, wpa2_ca.key, wpa2_server.pem, wpa2_server.crt and wpa2_server.key can be used to configure AP with
|
|
wpa2 enterprise encryption. The steps how to generate new certificates and keys using openssl is as follows:
|
|
|
|
1. wpa2_ca.pem wpa2_ca.key:
|
|
openssl req -new -x509 -keyout wpa2_ca.key -out wpa2_ca.pem
|
|
2. wpa2_server.key:
|
|
openssl req -new -key wpa2_server.key -out wpa2_server.csr
|
|
3. wpa2_csr:
|
|
openssl req -new -key server.key -out server.csr
|
|
4. wpa2_server.crt:
|
|
openssl ca -batch -keyfile wpa2_ca.key -cert wpa2_ca.pem -in wpa2_server.csr -key ca1234 -out wpa2_server.crt -extensions xpserver_ext -extfile xpextensions
|
|
5. wpa2_server.p12:
|
|
openssl pkcs12 -export -in wpa2_server.crt -inkey wpa2_server.key -out wpa2_server.p12 -passin pass:sv1234 -passout pass:sv1234
|
|
6. wpa2_server.pem:
|
|
openssl pkcs12 -in wpa2_server.p12 -out wpa2_server.pem -passin pass:sv1234 -passout pass:sv1234
|
|
7. wpa2_client.key:
|
|
openssl genrsa -out wpa2_client.key 1024
|
|
8. wpa2_client.csr:
|
|
openssl req -new -key wpa2_client.key -out wpa2_client.csr
|
|
9. wpa2_client.crt:
|
|
openssl ca -batch -keyfile wpa2_ca.key -cert wpa2_ca.pem -in wpa2_client.csr -key ca1234 -out wpa2_client.crt -extensions xpclient_ext -extfile xpextensions
|
|
10. wpa2_client.p12:
|
|
openssl pkcs12 -export -in wpa2_client.crt -inkey wpa2_client.key -out wpa2_client.p12
|
|
11. wpa2_client.pem:
|
|
openssl pkcs12 -in wpa2_client.p12 -out wpa2_client.pem
|
|
|
|
### Example output
|
|
|
|
Here is an example of wpa2 enterprise(PEAP method) console output.
|
|
|
|
I (1352) example: Setting WiFi configuration SSID wpa2_test...
|
|
I (1362) wpa: WPA2 ENTERPRISE VERSION: [v2.0] enable
|
|
|
|
I (1362) wifi: rx_ba=1 tx_ba=1
|
|
|
|
I (1372) wifi: mode : sta (24:0a:c4:03:b8:dc)
|
|
I (3002) wifi: n:11 0, o:1 0, ap:255 255, sta:11 0, prof:11
|
|
I (3642) wifi: state: init -> auth (b0)
|
|
I (3642) wifi: state: auth -> assoc (0)
|
|
I (3652) wifi: state: assoc -> run (10)
|
|
I (3652) wpa: wpa2_task prio:24, stack:6144
|
|
|
|
I (3972) wpa: >>>>>wpa2 FINISH
|
|
|
|
I (3982) wpa: wpa2 task delete
|
|
|
|
I (3992) wifi: connected with wpa2_test, channel 11
|
|
I (5372) example: ~~~~~~~~~~~
|
|
I (5372) example: IP:0.0.0.0
|
|
I (5372) example: MASK:0.0.0.0
|
|
I (5372) example: GW:0.0.0.0
|
|
I (5372) example: ~~~~~~~~~~~
|
|
I (6832) event: ip: 192.168.1.112, mask: 255.255.255.0, gw: 192.168.1.1
|
|
I (7372) example: ~~~~~~~~~~~
|
|
I (7372) example: IP:192.168.1.112
|
|
I (7372) example: MASK:255.255.255.0
|
|
I (7372) example: GW:192.168.1.1
|
|
I (7372) example: ~~~~~~~~~~~
|
|
I (9372) example: ~~~~~~~~~~~
|
|
I (9372) example: IP:192.168.1.112
|
|
I (9372) example: MASK:255.255.255.0
|
|
I (9372) example: GW:192.168.1.1
|
|
I (9372) example: ~~~~~~~~~~~
|