mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
796723a6df
- Added notes for interactive provisioning
109 lines
6.1 KiB
Markdown
109 lines
6.1 KiB
Markdown
****# ESP Provisioning Tool
|
|
|
|
# NAME
|
|
`esp_prov` - A python based utility for testing the provisioning examples over a host
|
|
|
|
# SYNOPSIS
|
|
|
|
```
|
|
python esp_prov.py --transport < mode of provisioning : softap \ ble \ console > [ Optional parameters... ]
|
|
```
|
|
|
|
# DESCRIPTION
|
|
|
|
Usage of `esp-prov` assumes that the provisioning app has specific protocomm endpoints active. These endpoints are active in the provisioning examples and accept specific protobuf data structures:
|
|
|
|
| Endpoint Name | URI (HTTP server on ip:port) | Description |
|
|
|---------------|------------------------------|------------------------------------------------------------------------------------------|
|
|
| prov-session | http://ip:port/prov-session | Security endpoint used for session establishment |
|
|
| prov-config | http://ip:port/prov-config | Endpoint used for configuring Wi-Fi credentials on device |
|
|
| proto-ver | http://ip:port/proto-ver | Version endpoint for checking protocol compatibility |
|
|
| prov-scan | http://ip:port/prov-scan | Endpoint used for scanning Wi-Fi APs |
|
|
| custom-data | http://ip:port/custom-data | Optional endpoint for sending custom data (refer `wifi_prov_mgr` example) |
|
|
|
|
|
|
# PARAMETERS
|
|
|
|
* `--help`
|
|
Print the list of options along with brief descriptions
|
|
|
|
* `--verbose`, `-v`
|
|
Sets the verbosity level of output log
|
|
|
|
* `--transport <mode>`
|
|
- Three options are available:
|
|
* `softap` - for SoftAP + HTTPD based provisioning
|
|
* Requires the device to be running in Wi-Fi SoftAP mode and hosting an HTTP server supporting specific endpoint URIs
|
|
* The client needs to be connected to the device softAP network before running the `esp_prov` tool.
|
|
* `ble` - for BLE based provisioning
|
|
* Supports Linux, Windows and macOS; redirected to console if dependencies are not met
|
|
* Assumes that the provisioning endpoints are active on the device with specific BLE service UUIDs
|
|
* `console` - for debugging via console-based provisioning
|
|
* The client->device commands are printed to STDOUT and device->client messages are accepted via STDIN.
|
|
* This is to be used when the device is accepting provisioning commands on UART console.
|
|
|
|
* `--service_name <name>` (Optional)
|
|
- When transport mode is `ble`, this specifies the BLE device name to which connection is to be established for provisioned. If not provided, BLE scanning is initiated and a list of nearby devices, as seen by the host, is displayed, of which the target device can be chosen.
|
|
- When transport mode is `softap`, this specifies the HTTP server hostname / IP which is running the provisioning service, on the SoftAP network of the device which is to be provisioned. This defaults to `192.168.4.1:80` if not specified
|
|
|
|
* `--ssid <AP SSID>` (Optional)
|
|
- For specifying the SSID of the Wi-Fi AP to which the device is to connect after provisioning.
|
|
- If not provided, scanning is initiated and scan results, as seen by the device, are displayed, of which an SSID can be picked and the corresponding password specified.
|
|
|
|
* `--passphrase <AP Password>` (Optional)
|
|
- For specifying the password of the Wi-Fi AP to which the device is to connect after provisioning.
|
|
- Only used when corresponding SSID is provided using the `--ssid` option
|
|
|
|
* `--sec_ver <Security version number>`
|
|
- For specifying the version of protocomm endpoint security to use. Following 3 versions are supported:
|
|
* `0` for `protocomm_security0` - No security
|
|
* `1` for `protocomm_security1` - X25519 key exchange + Authentication using Proof of Possession (PoP) + AES-CTR encryption
|
|
* `2` for `protocomm_security2` - Secure Remote Password protocol (SRP6a) + AES-GCM encryption
|
|
|
|
* `--pop <Proof of possession string>` (Optional)
|
|
- For specifying optional Proof of Possession string to use for protocomm endpoint security version 1
|
|
- Ignored when other security versions are used
|
|
|
|
* `--sec2_username <SRP6a Username>` (Optional)
|
|
- For specifying optional username to use for protocomm endpoint security version 2
|
|
- Ignored when other security versions are used
|
|
|
|
* `--sec2_pwd <SRP6a Password>` (Optional)
|
|
- For specifying optional password to use for protocomm endpoint security version 2
|
|
- Ignored when other security versions are used
|
|
|
|
* `--sec2_gen_cred` (Optional)
|
|
- For generating the `SRP6a` credentials (salt and verifier) from the provided username and password for protocomm endpoint security version 2
|
|
- Ignored when other security versions are used
|
|
|
|
* `--sec2_salt_len <SRP6a Salt Length>` (Optional)
|
|
- For specifying the optional `SRP6a` salt length to be used for generating protocomm endpoint security version 2 credentials
|
|
- Ignored when other security versions are used and the ``--sec2_gen_cred` option is not set
|
|
|
|
* `--custom_data <some string>` (Optional)
|
|
An information string can be sent to the `custom-data` endpoint during provisioning using this argument.
|
|
(Assumes the provisioning app has an endpoint called `custom-data` - see [provisioning/wifi_prov_mgr](https://github.com/espressif/esp-idf/tree/master/examples/provisioning/wifi_prov_mgr) example for implementation details).
|
|
|
|
# AVAILABILITY
|
|
|
|
For Android, a provisioning tool along with source code is available [here](https://github.com/espressif/esp-idf-provisioning-android)
|
|
|
|
## Dependencies
|
|
|
|
This requires the following python libraries to run (included in requirements.txt):
|
|
* `bleak`
|
|
* `future`
|
|
* `protobuf`
|
|
* `cryptography`
|
|
|
|
Run `pip install -r $IDF_PATH/tools/esp_prov/requirements.txt`
|
|
|
|
Note :
|
|
* The packages listed in requirements.txt are limited only to the ones needed AFTER fully satisfying the requirements of ESP-IDF
|
|
|
|
# EXAMPLE USAGE
|
|
|
|
Please refer to the `README.md` file with the `wifi_prov_mgr` example present under `$IDF_PATH/examples/provisioning/`.
|
|
|
|
This example uses specific options of the `esp_prov` tool and gives an overview of simple as well as advanced usage scenarios.
|