mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
63 lines
1.4 KiB
Markdown
63 lines
1.4 KiB
Markdown
| Supported Targets | ESP32-C2 | ESP32-C5 | ESP32-C6 | ESP32-H2 |
|
|
| ----------------- | -------- | -------- | -------- | -------- |
|
|
|
|
ESP-IDF UART HCI Controller
|
|
===========================
|
|
|
|
This is a BLE controller use UART as HCI interface.
|
|
|
|
It can do the configuration of UART number and UART baudrate by menuconfig.
|
|
|
|
## BLE HCI example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example start controller with uart hci.
|
|
|
|
It uses ESP32C2's Bluetooth controller.
|
|
|
|
In this example, two UARTs are used:
|
|
|
|
- UART0 is used as normal output or by IDF monitor
|
|
|
|
- UART1 is used to convey HCI messages
|
|
|
|
Pins 8, 9 are used as TxD, RxD PINs of UART1.
|
|
|
|
|
|
## How to use example
|
|
|
|
### Configure the project
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
There is this console output when bleprph is connected and characteristic is read:
|
|
|
|
```
|
|
set nimble port tx:8, rx:9.
|
|
set baud:115200.
|
|
controller lib commit: [fb738d4]
|
|
controller rom commit: [3314f9d]
|
|
I (346) system_api: Base MAC address is not set
|
|
I (356) system_api: read default base MAC address from EFUSE
|
|
|
|
```
|
|
|