mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
39 lines
1.3 KiB
Markdown
39 lines
1.3 KiB
Markdown
| Supported Targets | ESP32-C6 | ESP32-H2 |
|
|
| ----------------- | -------- | -------- |
|
|
|
|
# OpenThread Radio Co-Processor (RCP) Example
|
|
|
|
This example demonstrates an [OpenThread Radio Co-Processor](https://openthread.io/platforms/co-processor).
|
|
|
|
OpenThread RCP doesn't function alone, it needs to work together with a Host and this example covers two common user scenarios:
|
|
- Work with a Host Processor to perform a [Thread Border Router](https://openthread.io/guides/border-router).
|
|
- Work as a [Thread Sniffer](https://openthread.io/guides/pyspinel/sniffer).
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
To run this example, an ESP32-H4 board is required.
|
|
|
|
### Configure the project
|
|
|
|
The default communication interface is port 0 of ESP32-H4 UART running at 115200 baud, change the configuration in [esp_ot_config.h](main/esp_ot_config.h) if you want to use another interface or need different communication parameters.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board:
|
|
|
|
```
|
|
idf.py -p <PORT> build flash
|
|
```
|
|
|
|
Now you'll get an OpenThread RCP, you can try the following use cases:
|
|
|
|
#### Thread Border Router
|
|
|
|
Please refer to [ot_br](../ot_br) example for the setup steps.
|
|
|
|
#### Thread Sniffer
|
|
|
|
Please refer to [Thread Sniffer](https://openthread.io/guides/pyspinel/sniffer) for the detailed instructions.
|