mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
3e25d441a5
The following commit adds a real time stats example demonstrating how to obtain task CPU usage statistics over a period of time, as opposed to the current run time stats in FreeRTOS which measures task CPU usage as a percentage of total system run time.
72 lines
2.4 KiB
Markdown
72 lines
2.4 KiB
Markdown
# FreeRTOS Real Time Stats Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
FreeRTOS provides the function `vTaskGetRunTimeStats()` to obtain CPU usage statistics of tasks. However, these statistics are with respect to the entire runtime of FreeRTOS (i.e. **run time stats**). Furthermore, statistics of `vTaskGetRunTimeStats()` are only valid whilst the timer for run time statistics has not overflowed.
|
|
|
|
This example demonstrates how to get CPU usage statistics of tasks with respect to a specified duration (i.e. **real time stats**) rather than over the entire runtime of FreeRTOS. The `print_real_time_stats()` function of this example demonstrates how this can be achieved.
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
This example should be able to run on any commonly available ESP32 development board.
|
|
|
|
### Configure the project
|
|
|
|
```
|
|
make menuconfig
|
|
```
|
|
|
|
* Set serial port under Serial Flasher Options.
|
|
|
|
* Enable FreeRTOS to collect run time stats under `Component Config->FreeRTOS`
|
|
|
|
* The clock source of reference timer used for FreeRTOS statistics can be configured under `Component Config->FreeRTOS`
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
make -j4 flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
Getting real time stats over 100 ticks
|
|
| Task | Run Time | Percentage
|
|
| stats | 1304 | 0%
|
|
| IDLE0 | 206251 | 10%
|
|
| IDLE1 | 464785 | 23%
|
|
| spin2 | 225389 | 11%
|
|
| spin0 | 227174 | 11%
|
|
| spin4 | 225303 | 11%
|
|
| spin1 | 207264 | 10%
|
|
| spin3 | 225331 | 11%
|
|
| spin5 | 225369 | 11%
|
|
| Tmr Svc | 0 | 0%
|
|
| esp_timer | 0 | 0%
|
|
| ipc1 | 0 | 0%
|
|
| ipc0 | 0 | 0%
|
|
Real time stats obtained
|
|
```
|
|
|
|
- When compiled in dual core mode, the percentage is with respect to the combined run time of both CPUs. Thus, `50%` would indicate full utilization of a single CPU.
|
|
- In single core mode, the percentage is with respect to a single CPU. Thus, `100%` would indicate full utilization of the CPU.
|
|
|
|
The unit of `Run Time` is the period of the timer clock source used for FreeRTOS statistics.
|
|
|
|
## Troubleshooting
|
|
|
|
```
|
|
Getting real time stats over 100 ticks
|
|
Error getting real time stats
|
|
```
|
|
If the above is output when running the example, users should check the return value of `print_real_time_stats()` to determine the reason for failure.
|